13.2.6 Canceling settings on primary node

Cancel the settings for AdvancedCopy Manager CCM.

Copy the .install.sys, .stxc_install.sys and sys.properties files, overwriting the existing files.

Copy files below from the source to the target directory, overwriting the existing files.

File names in copy source	File names in copy target
/opt/FJSVccm/noncluster/micc/sys/.install.sys	/opt/FJSVccm/micc/sys/.install.sys
/opt/FJSVccm/noncluster/bin/.stxc_install.sys	/opt/FJSVccm/bin/.stxc_install.sys
/opt/FJSVccm/noncluster/sys/sys.properties	/opt/FJSVccm/sys/sys.properties

Delete the directories which contain copy source files.
Delete all directories and their contents listed below.
/opt/FJSVccm/noncluster

13.2.6.3 Canceling settings for Storage Cruiser's manager

Cancel the settings for Storage Cruiser's manager.

Execute the cluster unsetup command on the primary node.
On the primary node, execute the following command after blocking other users from accessing the shared disk for shared data.
```
# /opt/FJSVssmgr/cluster/esc_clunsetup
```
Specify the -l option if local free disk space on the secondary node is insufficient.
```
# /opt/FJSVssmgr/cluster/esc_clunsetup -l
```

Check the configurations.

ETERNUS SF Storage Cruiser settings were as follows.
      Cluster system : PRIMECLUSTER
      Node type      : Primary
      Mount point    : /esfmnt
      IP Address     : 10.10.10.10
      Mode         : Normal
 (restore from Shared Disk)Manager cluster deletion : Are you sure? [y,n,?]

To interrupt the cluster environmental setting processing, input "n". To continue processing, input "y", or press the Enter key.

Confirm that the displayed message is as follows:

FJSVrcx:INFO:27702:esc_clunsetup:primary node deletion completed

13.2.6.4 Canceling common setting

Delete the symbolic link set in "5.2.1.1.4 Link setup for shared disk".
Rename the directory name changed in step 2 of "5.2.1.1.3 Copying of dynamic disk files" as an original.
Set up the starting and stopping process of ETERNUS SF Manager to be controlled by operating system.
1. Execute the following command on the primary node.
```
# ls /etc/rc*.d/*SFmanager*
```
2. Rename all of the files exported by executing the command above.
  Delete "X" at the start of the file names.
  The example for executing command is shown below.
```
# mv /etc/rc2.d/XS99startSFmanager /etc/rc2.d/S99startSFmanager
```
Unmount the shared disk for shared data and the shared disk for ETERNUS SF Manager repository in the primary node.