9.3 What to do when configuration import is not possible

When the configuration information cannot be imported with the command, they can be registered as described below:

No.	Information that cannot be imported	Action
1	User name/password	Register the user name and password with the following procedure: Log in to the Web Console. Select the specified device, and click Reset Password in the Action pane. Register the user name and password for the device.
2	AdvancedCopy Manager Copy Control Module configuration	Register the configuration information with the following procedure: Delete the existing registered information with the acarray remove command. Register the ETERNUS Disk storage system in AdvancedCopy Manager Copy Control Module with the acarray add command. Set the ETERNUS Disk storage system name as the ETERNUS name. Log in to the Web Console. If the user name and password are not set for the specified device, click Reset Password in the Action pane and register the user name and password. Execute the Reload Conf. operation in the Action pane.
3	iSCSI HBA information	Register the iSCSI HBA information with the following procedure. Log in to the Web Console. Select the server where the iSCSI HBA is configured, click Add under HBA in the Action pane and set the HBA information.

No.

Information that cannot be imported

Action

User name/password

Log in to the Web Console.
Select the specified device, and click Reset Password in the Action pane. Register the user name and password for the device.

AdvancedCopy Manager Copy Control Module configuration

Delete the existing registered information with the acarray remove command.
Register the ETERNUS Disk storage system in AdvancedCopy Manager Copy Control Module with the acarray add command.
Set the ETERNUS Disk storage system name as the ETERNUS name.
Log in to the Web Console.
If the user name and password are not set for the specified device, click Reset Password in the Action pane and register the user name and password.
Execute the Reload Conf. operation in the Action pane.

iSCSI HBA information

Log in to the Web Console.
Select the server where the iSCSI HBA is configured, click Add under HBA in the Action pane and set the HBA information.

See

Refer to "Web Console Operation Method" in the ETERNUS SF Web Console Guide for this version for information on the instructions regarding the Web Console operations.
Refer to "Commands" in the ETERNUS SF Operation Guide for Copy Control Module for this version for information on the acarray remove command and acarray add command.