6.1.4 Tasks to be performed after the upgrade

Restore the backup of the operational environment of AdvancedCopy Manager's manager for the previous version.

AdvancedCopy Manager operational environment

Restore the operational environment that was backed up in "6.1.1.1 Backing up the operational environment of the previous version".

Note

For the operational environment restore, start a new window for command execution, and then perform the procedure on the window.

See

Refer to the following table to restore the operational environment.

Server type	OS	Reference
Management Server	Windows	A.9 Restoring the repository data (for Windows)
Management Server	Solaris, Linux	A.10 Restoring the repository data (for Solaris, Linux)
Management Server which also serves as a Managed Server	Windows	Perform the steps in the following order: A.9 Restoring the repository data (for Windows) A.11 Restoring the management information (for Windows)
Management Server which also serves as a Managed Server	Solaris, Linux	Perform the steps in the following order: A.10 Restoring the repository data (for Solaris, Linux) A.12 Restoring the management information (for Solaris, Linux)

AdvancedCopy Manager Copy Control Module operational environment

Restore the operational environment that was backed up in "6.1.1.1 Backing up the operational environment of the previous version".

See

Refer to "A.14 Restoring the environment setting files" for information on performing a restore.

License information

When AdvancedCopy Manager and/or AdvancedCopy Manager Copy Control Module are installed, restore the definition of the license information.

Restore the license management database of ETERNUS SF License Manager by executing the esflm restore command. Refer to the ETERNUS SF Installation and Setup Guide for this version for information on the command.

Example of executing the command is shown below. The backupFileName is the file name specified when the backup data was created.

> esflm restore backupFileName
Restoration of license database was performed successfully

6.1.4.2 Importing the configuration information

Import the configuration information from the previous version by executing the esfimportdevconf command using Administrator permissions.
For the upgrade from ETERNUS SF Manager Version 15.0B, this step is not necessary.

Check that the targeted devices can be accessed before executing the esfimportdevconf command.

For Windows (DOS prompt):
```
programDir\Common\bin\esfimportdevconf
```
For Solaris or Linux:
```
# /opt/FJSVesfcm/bin/esfimportdevconf
```

After executing the esfimportdevconf command, confirm that "Complete" is displayed in IMPORT STATUS column in the esfimportdisplay command of the configuration information import.

See

Refer to "9.2 Command references" for information on each import command.

6.1.4.3 Setting up a user account

Set up a user account in order to use the ETERNUS SF Manager functions.

See

Refer to "Setting up user account" in the ETERNUS SF Installation and Setup Guide for this version for information on setup.

6.1.4.4 Setting up the Web Console

If firewalls are used between the PC on which the Web Console is launched and the Management Server, perform firewall settings to allow transmission.

See

Refer to "Setting up for using Web Console" in the ETERNUS SF Installation and Setup Guide for this version for information on firewall setup.

6.1.4.5 Registering the license

See

Refer to "License Management" in the ETERNUS SF Installation and Setup Guide for this version for information on the license settings.

6.1.4.6 Redefining missing information

Server information
When the Management Server serves as a Managed Server, the Management Server is registered in the server.
See
Refer to "Register the server" in the ETERNUS SF Web Console Guide for this version for information on server registration.
AdvancedCopy Manage Copy Control Module configuration information
To use the AdvancedCopy Manager Copy Control Module, set the device information again in accordance with the following procedure:
See
Refer to "Commands" in the ETERNUS SF Operation Guide for Copy Control Module for this version for information on the commands.
1. Confirm the registered ETERNUS Disk storage system by executing the acarray list command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray list
Name BOX-ID IP Address
----- ---------------------------------------- ------------
DX90 00ETERNUSDXL##ET09E24B####LH4311015511## 10.124.6.251
```
2. Confirm the detailed information of the registered ETERNUS Disk storage system by executing the acarray detail command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray detail -a DX90
Disk Array Name : DX90
BOX-ID : 00ETERNUSDXL##ET09E24B####LH4311015511##
IP Address : 10.124.6.251
Admin User : ****
Access Volume : X:
```
3. Remove all of the registered ETERNUS Disk storage system by executing the acarray remove command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray remove -a DX90
Successful completion.
```
4. Re-register all of the ETERNUS Disk storage systems that were removed in step 3 by executing the acarray add command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray add -a DX90 -ip 10.124.6.251 -user **** -password **** -path X:
Successful completion.
```
  Point
  When the ETERNUS Disk storage system was registered by specifying a nonexistent drive letter or device name in the previous version of AdvancedCopy Manager CCM, re-register its ETERNUS Disk storage system as a remote device.