2.3.7 Redefining missing information

Administrator information
Enter the Administrator information.
See
Refer to "Display and change the contact information" in the ETERNUS SF Web Console Guide for this version for information on server registration.
Server information
Enter the server information.
See
Refer to "Register the server" in the ETERNUS SF Web Console Guide for this version for information on server registration.
Connection type
To use the Advanced Copy function of Express, set the connection type using the ETERNUS Disk storage system.
See
Refer to "Connection type settings" in the ETERNUS SF Express Operation Guide for this version for information on connection type settings.
AdvancedCopy Manage Copy Control Module configuration information
To use the AdvancedCopy Manager Copy Control Module, set the device information again in accordance with the following procedure:
See
Refer to "Commands" in the ETERNUS SF Operation Guide for Copy Control Module for this version for information on the commands.
1. Confirm the registered ETERNUS Disk storage system by executing the acarray list command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray list
Name BOX-ID IP Address
----- ---------------------------------------- ------------
DX90 00ETERNUSDXL##ET09E24B####LH4311015511## 10.124.6.251
```
2. Confirm the detailed information of the registered ETERNUS Disk storage system by executing the acarray detail command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray detail -a DX90
Disk Array Name : DX90
BOX-ID : 00ETERNUSDXL##ET09E24B####LH4311015511##
IP Address : 10.124.6.251
Admin User : ****
Access Volume : X:
```
3. Remove all of the registered ETERNUS Disk storage system by executing the acarray remove command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray remove -a DX90
Successful completion.
```
4. Re-register all of the ETERNUS Disk storage systems that were removed in step 3 by executing the acarray add command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray add -a DX90 -ip 10.124.6.251 -user **** -password **** -path X:
Successful completion.
```
  Point
  When the ETERNUS Disk storage system was registered by specifying a nonexistent drive letter or device name to the access volume (previously called "access path") in the previous version, re-register its ETERNUS Disk storage system as a remote device.
5. Reload the configuration information.
  See
  Refer to "Reload ETERNUS Disk storage system configuration information" in the ETERNUS SF Web Console Guide for this version for information on reloading the configuration information.