In order to enable the server on which the AdvancedCopy Manager CCM is installed (hereafter referred to as "CCM Server") to communicate with the ETERNUS Disk storage systems to be managed, configure the network environment. Refer to the ETERNUS Web GUI manual for information on how to configure the network environment.
When setting up firewall between CCM Server and ETERNUS Disk storage system
If you set up a firewall between the CCM Server and ETERNUS Disk storage system, specify below port numbers so as to enable transmissions to pass the firewall.
The port numbers depend on the model of ETERNUS Disk storage system.
Item to be set | For using ETERNUS Disk storage system that can be operated by Copy command via LAN | For using ETERNUS Disk storage system that cannot be operated by Copy command via LAN |
|---|---|---|
Port number | 22 | 1999 |
23 | ||
Protocol | tcp | |
Communication start direction | From the CCM Server to ETERNUS Disk storage system | |
For using both types of ETERNUS Disk storage system, some that can and some that cannot be operated by Copy command via LAN, make both settings.
Refer to "Table 2.7 ETERNUS Disk storage system supporting Copy command via SAN and via LAN" for information on the ETERNUS Disk storage system models that can be operated by Copy command via LAN.
