The information updated by the Screen Refresh Interval (Default is 30 seconds) is the information of each status in the Menu area and the information of the Job Status pane only. To update all information displayed on the Web Console (including the information displayed on the Main pane) to the information that ETERNUS SF system maintains, it is necessary to click "
" in the menu area.
See
Refer to "4.22.3 Change the value for screen refresh interval" for how to change the Screen Refresh Interval.
Note
Clicking "" resets the following setting values in the Main pane to the default value. Refer to "3.3 Main pane" for respective setting.
Filter setting
Page setting
Displayed records setting
In addition, when information screen has tabs, clicking "" displays the leftmost tab information on the Main pane regardless of the current tab.
Clicking "" does not reset values in the Filter Setting on the Job Status pane.
Clicking "" displays the existing information held by ETERNUS SF system. It does not acquire updated information from the devices. Clicking Reload Conf. or Refresh in an Action pane obtains updated information from the device.
Device information excluding system information, device configuration status and performance management configuration information is automatically collected for the following devices. Clicking "" displays the automatically collected information.
ETERNUS DX80 S2/DX90 S2 (firmware version: V10L40 or later)
ETERNUS DX400 S2 series (firmware version: V10L40 or later)
ETERNUS DX8000 S2 series (firmware version: V10L40 or later)
