ETERNUS SF Express V15.2/ Storage Cruiser V15.2/ AdvancedCopy Manager V15.2 Installation and Setup Guide

2.1 Supported devices

This section describes devices that are supported by Express, Storage Cruiser and AdvancedCopy Manager.

Devices supported by Express

Express supports the following ETERNUS Disk storage systems.

• ETERNUS DX60/DX60 S2/DX80/DX80 S2/DX90/DX90 S2

Note

• The firmware versions of ETERNUS DX60/DX60 S2/DX80/DX80 S2/DX90/DX90 S2 must be as shown in the table below:

  Table 2.1 ETERNUS Disk storage systems and compatible firmware version numbers

  Model name	Compatible firmware version number
  ETERNUS DX60/DX80/DX90	V10L31 or later
  ETERNUS DX60 S2	V20L10 or later
  ETERNUS DX80 S2/DX90 S2	V10L16 or later

• For using Remote Advanced Copy between DX90 and DX90 S2, the firmware version of DX90 must be updated to V10L61 or later.

• Enable the following settings for the interface to ETERNUS Disk storage systems:

  Table 2.2 ETERNUS Disk storage systems and interface settings

  Model name	Interface settings
  ETERNUS DX60/DX60 S2DX80/DX90	Telnet connection
  ETERNUS DX80 S2/DX90 S2	SSH connection or telnet connection

Devices supported by Storage Cruiser

Storage Cruiser supports the following devices:

Device type	Device name
Storage device	ETERNUS DX series ETERNUS2000, ETERNUS4000, ETERNUS8000 ETERNUS CS800, ETERNUS CS2000 ETERNUS VS850 ETERNUS Tape library NetApp FAS Series NetApp V-Series
Fibre Channel switch	ETERNUS SN200, ETERNUS SN200MDS PRIMERGY BX600 Fibre Channel Switch Blade Brocade series Brocade VDX series PRIMERGY BX Ethernet Fabric Switch McDATA Intrepid 6140, McDATA Sphereon 4500
Others	Solaris, Windows, Linux, HP-UX, VMware, and AIX server nodes with Storage Cruiser's agent installed VMware Infrastructure 3 Version 3.5 or later VMware ESXi 3.5 or later VMware vSphere 4 or later

Note

• The firmware versions of ETERNUS DX80 S2/DX90 S2 and DX400 S2 series must be as shown in the table below.

  Table 2.3 ETERNUS Disk storage systems and compatible firmware version numbers

  Model name	Compatible firmware version number
  ETERNUS DX80 S2/DX90 S2	V10L16 or later
  ETERNUS DX400 S2 series	V10L16 or later

• Enable the following settings for the interface to ETERNUS Disk storage systems:

  Table 2.4 ETERNUS Disk storage systems and interface settings

  Model name	Interface settings
  ETERNUS DX60/DX60 S2DX80/DX90	Telnet connection
  ETERNUS DX80 S2/DX90 S2 ETERNUS DX400 S2 series ETERNUS DX8000 S2 series	SSH connection or telnet connection

Devices supported by AdvancedCopy Manager

AdvancedCopy Manager supports the following ETERNUS Disk storage systems.

• ETERNUS DX series

• ETERNUS2000, ETERNUS4000, ETERNUS8000

Note

• The firmware versions of ETERNUS DX60/DX60 S2/DX80/DX80 S2/DX90/DX90 S2 must be as shown in the table below.

  Table 2.5 ETERNUS Disk storage system and compatible firmware version numbers

  Model name	Compatible firmware version number
  ETERNUS DX60/DX80/DX90	V10L31 or later
  ETERNUS DX60 S2	V20L10 or later
  ETERNUS DX80 S2/DX90 S2	V10L16 or later

• For using Remote Advanced Copy between DX90 and DX90 S2, the firmware version of DX90 must be updated to V10L61 or later.

• Enable the following settings for the interface to ETERNUS Disk storage systems:

  Table 2.6 ETERNUS Disk storage systems and interface settings

  Model name	Interface settings
  ETERNUS DX60/DX60 S2DX80/DX90	Telnet connection
  ETERNUS DX80 S2/DX90 S2 ETERNUS DX400 S2 series ETERNUS DX8000 S2 series	SSH connection or telnet connection

Information

With AdvancedCopy Manager CCM, the devices listed below can use Copy command via SAN and via LAN.

Table 2.7 ETERNUS Disk storage system supporting Copy command via SAN and via LAN

Device name	Copy command via SAN		Copy command via LAN
	Operation	Firmware version	Operation	Firmware version
ETERNUS DX60/DX60 S2/DX80/DX90	A	All versions	N/A	-
ETERNUS DX80 S2/DX90 S2	A	All versions	A	All versions
ETERNUS DX400 series	A	All versions	N/A	-
ETERNUS DX400 S2 series	A	All versions	A	All versions
ETERNUS DX8000 series	A	All versions	N/A	-
ETERNUS DX8000 S2 series	A	All versions	A	All versions
ETERNUS2000 models 100 and 200	A	V10L50 or later	N/A	-
ETERNUS4000 models 300 and 500	A	V11L50 or later	N/A	-
ETERNUS4000 models 400 and 600	A	All versions	N/A	-
ETERNUS8000 models 700, 900, 1100 and 2100	A	V11L50 or later	N/A	-
ETERNUS8000 models 800, 1200 and 2200	A	All versions	N/A	-

(A=Available, N/A=Not Available)

For details on Copy command via SAN and via LAN, refer to "System Configuration" in the ETERNUS SF Operation Guide for Copy Control Module.