Description
This operation component switches the control node of a resource to other specified nodes. Relevant cluster system is PRIMECLUSTER.
Options
Basic Options
Host name or IP address of the host that will switch the resource of the cluster system.
An argument error occurs if the host name or IP address is omitted.
The maximum length of the host name or IP address is 1,024 characters. An argument error occurs if this is exceeded.
Name of the resource to be switched.
An argument error occurs if the resource name is omitted.
The maximum length of the resource name is 1,024 characters. An argument error occurs if this is exceeded.
Advanced Options
Name of the node where the resource is to be placed.
If the node name is omitted, switch to the system node that is highest priority.
If the node name is omitted, the resource is not switched when the resource is operated on the highest priority system node.
The maximum length of the node name is 1,024 characters. An argument error occurs if this is exceeded.
Name of the cluster system for the linked product.
Specify PCL. This option is not case sensitive.
If the MW type is omitted, the Configuration Management Database (CMDB) will be searched based on the specified host name or IP address, and Systemwalker Runbook Automation automatically sets the acquired mw type as a value.
Installation path of the command for the linked product.
If PRIMECLUSTER is specified to mwtype as a linked product for this operation component, Installation path is able to omit. The linked product is PRIMECLUSTER.
The maximum length of the Installation path is 1,024 characters. An argument error occurs if this is exceeded.
OS type of the host that will switch the resource.
Specify Windows, Linux or Solaris. This option is not case sensitive.
If the OS type is omitted, the Configuration Management Database (CMDB) will be searched based on the specified host name or IP address, and Systemwalker Runbook Automation automatically sets the acquired OS type as the value.
The maximum length of the OS type is 1,024 characters. An argument error occurs if this is exceeded.
Name of the user connecting with SSH to the host switch the resource.
If the connected user name and password required for connection are not specified, the Configuration Management Database (CMDB) is searched based on the specified host name or IP address and Systemwalker Runbook Automation automatically sets the acquired connected user name as the value.
If the operation component connects with the file transfer infrastructure, the connected user name will be fixed at either of the following names and cannot be changed. In this case, the user name is ignored even if specified.
If the Business Server is running on Windows: SYSTEM user
If the Business Server is running on Linux or Solaris: root
The maximum length of the connected user name is 1,024 characters. Argument error occurs if this is exceeded.
Password of the user connecting with SSH to the host switch the resource.
If the connected user name and password required for connection are not specified, the Configuration Management Database (CMDB) is searched based on the specified host name or IP address and Systemwalker Runbook Automation automatically sets the acquired connected user password as the value.
If it connects with File Transfer Infrastructure, the connected user password is invalid.
The maximum length of the connected user password is 1,024 characters. Argument error occurs if this is exceeded.
Name of the user switching the resource on the host switch the resource.
If the "execusername" and "execpassword" are not specified, the Configuration Management Database (CMDB) is searched based on the specified host name or IP address and Systemwalker Runbook Automation automatically sets the acquired administrator user as the value.
If not to register to CMDB, it is executed by name of the user connecting.
If the host specified in "hostname" is running on Windows and it connects with the file transfer infrastructure, execute the command as a SYSTEM user. In this case, the connected user name is invalid.
The maximum length of the user name is 1,024 characters. An argument error occurs if this is exceeded.
This operation component does not use the value of "execpassword". The value of "execpassword" is ignored even if specified.
This is the completion timeout (seconds) for the execution of operation components.
Values between 300 and 86400 (1 day) can be specified.
For example: When timeout is to occur every 10 minutes: 600
When the execution of the operation components is not completed even if the specified time passes, the processing of the operation components is interrupted in return value 201.
This is the retry count for the execution of operation components.
When the operation components end in return value 161, the retry count is specified. Values between 0 and 5 can be specified.
As a result of retrying, if the operation components ended by the return values other than 161, the execution of the operation components ends even if it doesn't reach the specified retry count. The return values of the operation components become the value executed at the end.
For example: When retries are to be performed twice: 2
This is the retry interval (seconds) for operation components.
When the operation components end in return value 161, the retry interval is specified. Values between 1 and 14400 can be specified.
For example: When retrying in 300 seconds: 300
If the specification of the timeout, retry and retry_interval is omitted, and a value beyond the limits of the above-mentioned is input, the value specified with the operation components definition file becomes effective. Refer to "2.5 Definition File for Operation Components" for details.
Return Values
Icon | Name | Return value | Description |
|---|---|---|---|
| Success | 0 | Switch the resource was successful. |
| Failure | 159 | Specified resource was not detected. |
161 | Failed to switch the resource status. Retried if a retry count has been specified. | ||
187 | Authentication failed when an attempt was made to connect to the server over the network (using SSH). Alternatively, an error occurred during the processing of communications with the server (file transfer infrastructure). In this case, the error code for the file transfer infrastructure is output to the execution results. Refer to "3.21 Detailed Code of File Transfer Infrastructure" for information on error codes. | ||
188 | When an operation component was performing an operation on a Business Server where an RBA Agent has not been installed, the network communications (SSH) with the Business Server was closed. | ||
189 | An attempt to connect to the server over the network (using SSH) failed. Alternatively, an error occurred during the processing of communications with the server (file transfer infrastructure). In this case, the error code for the file transfer infrastructure is output to the execution results. Refer to "3.21 Detailed Code of File Transfer Infrastructure" for information on error codes. | ||
197 | There is an error in the input information. | ||
198 | There is an error in the option content. | ||
200 | Switch of the resource status terminated abnormally. | ||
- | - | 201 | Execution of operation component timed out. |
202 | The operation component was not executed. There is a problem in the setting to execute operation components. | ||
203 | Failed to execute the operation component. There is a problem in the Operation Automation Server environment. | ||
205 | The operation component was not executed. There is a problem with the input information specification of the operation component. | ||
206 | The operation component was not executed normally. There is a problem with the output information specification of the operation component. | ||
207 | The operation components were not executed. There is a possibility that the operation components are not registered in the Management Server. | ||
208 | The Automated Operation Process has been canceled because the Automated Operation Process was recovered while the operation component was executing. |
Output information
Variable | Description |
|---|---|
message | This variable will be set to the following message if the resources for the cluster system are switched successfully. The operation component was successful. If an attempt to switch the resources for the cluster system fails, the content of the error will be output as a string. |
returnCode | This variable is set to the return value. |
Notes
This operation component uses File transfer infrastructure or SSH communication to perform its operations when specify the host name other than the Management Server. It is necessary to be able to connect at least each one. Refer to "3.16 Notes of Each Communication Method" for information on communication methods.
Refer to "3.16.7 Notes When Connected User And Executing User Are Different" for information on different connected and executing users.
If specify logical host name or logical IP address to host name or IP address, information about this logical host is not registered to the Configuration Management Database (CMDB). It is necessary to take the following either appropriate action.
Specify following options at all times.
mwtype, username, password
Register the information on Configuration Management Database (CMDB) in advance.
Register the information about logical host to the Configuration Management Database (CMDB) in advance. Refer to "Administration of the configuration items" in the Systemwalker Runbook Automation Operation Guide on how to register the information.
Confirm the return values with the Web console. Refer to "Confirming the Operation Component Execution Status/Execution Results" in the Systemwalker Runbook Automation Operation Guide for details.
When the return value of 201-208 is output, the Automated Operation Process enters an abort or error state, and the error message is output to the following places.
Event log of Management Server (when the Management Server is Windows(R))
System log of Management Server (when the Management Server is Linux)
Custom message of BPMN
Confirm the message in either of the above-mentioned place, and take an appropriate action. Refer to the Systemwalker Runbook Automation Message Guide for details.
This operation component relevant following cluster system.
This operation component relevant following cluster system.
Linux:
PRIMECLUSTER Enterprise Edition 4.3A00 or later
PRIMECLUSTER HA Server 4.3A00 or later
PRIMECLUSTER Clustering Base 4.3A00 or later
Solaris:
PRIMECLUSTER Enterprise Edition 4.3A10
PRIMECLUSTER HA Server 4.3A10
PRIMECLUSTER Clustering Base 4.3A10
