This section explains how to analyze the usage trend in a subnetwork unit (or a section unit). For example, which content is accessed by persons in which section, where the network is divided by section at the in-house Web site.
You can grasp the following information by analysis from the standpoint of the usage trend in the unit of subnetwork and utilize it for Web site operation.
Which content is accessed by persons in which section?
Analysis of accesses from two categories:one from in-house and the other from outside the company
The following environment setting is required to make analysis in subnetwork units.
Setting for option definition file
Each subnetwork to be analyzed is defined in the subnetwork-unit analysis definition block in the option definition file.
See
For information about the storage location of the Option Definition File refer to "15.2.3.1 File storage location".
The following gives an example where subnetworks are defined as listed below for analysis.
Subnetwork range | Subnetwork name |
|---|---|
192.168.0.1 to 192.168.0.255 | General affairs department |
192.168.1.1 to 192.168.1.127 | Sales department I |
192.168.1.128 to 192.168.1.255 | Sales department II |
192.168.2.1 to 192.168.2.255 192.168.5.1 to 192.168.5.255 | Manufacturing department |
In the above case, the definition of the subnetwork-unit analysis definition block in the option definition file is as follows:
[SubnetName] 192.168.0.1-192.168.0.255=General_affairs_department 192.168.1.1-192.168.1.127=Sales_department_I 192.168.1.128-192.168.1.255=Sales_department_II 192.168.2.1-192.168.2.255=Manufacturing_department 192.168.5.1-192.168.5.255=Manufacturing_department |
See
For the details about the setting, refer to "15.2.3.3 File internal format (analysis definition block for each subnetwork)".
Open the use analysis screen as follows:
Click the [Trend Viewer] button on the [Web Site Management] window.
->Select the agent to be analyzed on the [Trend Viewer-Agent selection] window then click the [OK] button.
In the [use analysis] screen, analysis target server, analysis data type and analysis method can be selected. Here, select the "Subnet" as the analysis method.
The subnet definition block of the Option Definition File is effective in the [use analysis] screen as soon as it is defined.
The following shows the window for analysis on the subnetwork base.
Point
The information in the subnetwork-unit analysis definition block that is defined in the option definition file becomes valid from postdefinition analysis. This information enables subnetwork-unit analysis, including the information that has already been registered in the use trend DB.
