A.6.4 Network Device Attributes

General Area

Network device name: The name used to identify a network device is displayed.

System Name (sysName): The name of the device specified as a network device is displayed.

IP address: The IP address on the admin LAN is displayed.

Device name (Product name)

The product name of the network device is displayed.

For NS appliances, "NSAppliance" is displayed.

Model

The model name of a network device is displayed.

For NS appliances, "NSAppliance" is displayed.

Vendor

The vendor name of a network device is displayed.

For NS appliances, "Fujitsu" is displayed.

Serial number

The serial number of a network device is displayed.

For NS appliances, "-" is displayed.

Firmware version: The firmware version of a network device is displayed.

Slot: A slot number representing the mounted location is displayed.
This is only displayed for LAN switch blades. A hyphen ("-") is displayed in other cases.

Port Properties Area

Port Number: The number of the port of the selected network device is displayed.

Port Name: The name assigned to the port of the selected network device is displayed.

Member Port: When the name of a port with link aggregation is displayed for the port name, the port names of the physical port with link aggregation are displayed separated by commas (",").
When the physical port name is displayed as the port name, a hyphen ("-") is displayed.

Link Status

The operational status of the port is displayed.

One of the following is displayed:

up
down
unknown

Speed/DuplexMode: The speed and duplex mode of the operating port are displayed.

Link Aggregation Group: The name of the link aggregation group to which the port of the selected LAN switch belongs.
If it does not belong to link aggregation, a hyphen ("-") is displayed.

Link aggregation information

The following information is only displayed when LAN switch blades (*) are selected.

Link aggregation group name: The name of the link aggregation group to which the port of the selected LAN switch blade belongs is displayed.

Port name

The link aggregation port name is displayed.

For PY-SWB104 (PG-SW109)
LAG/Link aggregation group number
For PY-SWB101 (PG-SW201) or PY-SWB102(PG-SW111)
Logical port number of the LAG/port channel

Member port:Link status: The physical port names and the link status (up or down) of the physical ports is displayed for the ports in the link aggregation.

VLAN

VLAN ID: A list of VLAN IDs set in the selected LAN switch is displayed.

Untagged Port(s): A list of ports set with a port VLAN ID is displayed.
The logical port for link aggregation is only displayed for LAN switch blades (*).

Tagged Port(s): A list of ports set with tagged VLAN ID(s) is displayed.
The logical port for link aggregation is only displayed for LAN switch blades (*).

* Note: The following LAN switch blades are included:

PY CB Eth Switch/IBP 10Gb 18/8
PY CB Eth Switch/IBP 1Gb 36/8+2
PY CB Eth Switch/IBP 1Gb 36/12
PY CB Eth Switch/IBP 1Gb 18/6

Network links

The following information is only displayed for LAN switch blades.

Resource Name (left side): The name of the selected network device is displayed.

I/F (left side): The port name of the network device is displayed.

I/F (right side): The interface name of the resource connected to the network device is displayed.

Resource Name (right side): The name of the resource connected to the network device is displayed.

Note

Information about connections with network devices is not displayed.