ServerView Resource Orchestrator Virtual Edition V3.1.0 User's Guide

7.3.5 Configuring VLANs on External Ports

Use the following procedure to configure VLANs on a LAN switch blade's external ports.

1. In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.

   The [VLAN Settings] dialog is displayed.

2. To use this feature, the following settings must first be defined:

   VLAN

   Specify the VLAN ID to assign to a LAN switch blade port.

   Adding a new VLAN ID

   1. Under VLAN, select [Create new].

   2. Enter a VLAN ID number.
      For details on VLAN IDs, refer to the manual of the LAN switch blade to be used.

   Modifying an existing VLAN ID

   1. Under VLAN, select [Change].

   2. Select a VLAN ID.

   Physical Port, Link Aggregation

   Select port numbers to configure or VLAN types of link aggregation group names ([Untagged] or [Tagged]).

3. Click <OK>.

   Check that the VLAN has been set.

4. Select the LAN switch blade in the server resource tree of the ROR console and display the [Resource Details] tab.
   Confirm that the VLAN information is displayed in [VLAN Area] on [Resource Details].