This section explains messages starting from VSYS10500.
System-ID[{0}] has already been deployed.
Description
The L-Platform with the specified L-Platform ID has already been deployed.
Parameter
{0}: L-Platform ID
Corrective Action
Check whether there is a problem with the L-Platform ID of the L-Platform to be deployed.
If the L-Platform ID is correct, contact Fujitsu technical support.
The server operating in the system [{0}] exists.
Description
The L-Platform includes a server that is currently running.
Parameter
{0}: L-Platform name
Corrective Action
Stop the managed server that is running, and then return the system again.
These servers [{0}] operating in the system [{1}] exists.
Description
The L-Platform includes a server that is currently running.
Parameter
{0}: Server ID
{1}: L-Platform ID
Corrective Action
Stop the managed server that is running, and then reconfigure the L-Platform.
Resource_id [server#deploy_master] of a new server is not null. {0}
Description
In server#deploy_master, the resource_id of the new server information to be added is not null.
Parameter
{0}: Exception information
Corrective Action
The configuration cannot be changed because there is a problem with the information for the managed server being added.
Contact Fujitsu technical support.
Resource_id [vdisk#deploy_master] of a new disk is not null.{0}
Description
In vdisk#deploy_master, the Resource_id of the information for the new disk to be added is not null.
Parameter
{0}: Exception information
Corrective Action
The configuration cannot be changed because there is a problem with the information for the managed disk being added.
Contact Fujitsu technical support.
Nic of a new server is missed [vnic#deploy_master].{0}
Description
The NIC information (vnic#deploy_master) for the new server is missing.
Parameter
{0}: Exception information
Corrective Action
Check whether there is a problem with the settings for the <vnic> tag in the registered template information file.
If there are no problems with the template information file, contact Fujitsu technical support.
VNet:{0} is not registered in [vnet#deploy_master].
Description
The "vent" used by the "vnic#deploy_master" has not been registered with the "vnet#deploy_master".
Parameter
{0}: Network ID
Corrective Action
Check whether there are any problems with the <vnet> tag in the registered template information file.
If there are no problems with the template information file, contact Fujitsu technical support.
Status that related Image-ID [SERVER-ID: {0}] doesn't exist in table [<image>].
Description
The image ID associated with SERVER-ID: {0} does not exist in the image table.
Parameter
{0}: Server ID
Corrective Action
Check whether image information that is being used by the L-Platform that has been deployed has been deleted.
If the image information has been deleted, register it again, and then try again.
If the error persists, contact Fujitsu technical support.
Resource_id [{0}] is null. {1}.
Description
The "rid" for the table is null.
Parameter
{0}: Table name
{1}: Resource ID
Corrective Action
Check if Resource Management function is operating normally.
If Resource Management function is operating normally, contact Fujitsu technical support.
The server backuping in the system [{0}] exists.
Description
The L-Platform includes a server that is currently being backed up.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the managed server, and then reconfigure the L-Platform.
The server restoring in the system [{0}] exists.
Description
The L-Platform includes a server that is currently being restored.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the managed server, and then reconfigure the L-Platform.
The disk backuping in the system [{0}] exists.
Description
The L-Platform includes a disk that is currently being backed up.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the managed server, and then reconfigure the L-Platform.
The disk restoring in the system [{0}] exists.
Description
The L-Platform includes a disk that is currently being restored.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the managed server, and then reconfigure the L-Platform.
[{0}] was not able to be acquired from CBRM.
Description
{0} could not be obtained from the Resource Management function.
Parameter
{0}: Item name of the return value
Corrective Action
Check if the Resource Management function is operating normally.
If the Resource Management function is operating normally, contact Fujitsu technical support.
Status that related IP Pool doesn't exist in table [{0}].
Description
The IP Pool information associated with [tenant name:{0}] does not exist in the table.
Parameter
{0}: Tenant name
Corrective Action
Contact Fujitsu technical support.
System name already exists. System name=[{0}]
Description
The -Platform name already exists.
Parameter
{0}: L-Platform name
Corrective Action
Specify a different L-Platform, and then try again.
Network resource is not found. System name=[{0}].
Description
A network resource did not exist when the subnet was selected automatically.
Parameter
{0}: L-Platform name
Corrective Action
Check whether the network resource has been registered with Resource Management function.
IP address are missing. System name=[{0}].
Description
There were not enough IP addresses when the subnet was selected automatically.
Parameter
{0}: L-Platform name
Corrective Action
Add the number of IP addresses required to deploy the L-Platform using Resource Management function.
Network resource is not found [System-ID:{0} Template-ID:{1} resourceName:{2}].
Description
The network resource corresponding to the network resource name specified in the template meta-information could not be obtained when the L-Platform was deployed.
Parameter
{0}: L-Platform ID
{1}: Template ID
{2}: Network resource name
Corrective Action
Check whether the network resource name specified by the <resourceName> tag under the <vnet> tag for the registered L-Platform template information.
There is no network that can be selected. System name=[{0}]
Description
There were no automatic selection target network resources, therefore the L-Platform distribution failed.
Parameter
{0}: L-Platform ID
Corrective Action
Check whether the category and segment identifier information setting of the segment information and template information is valid.
There is no effective L-Server template. [L-Server Name:{0}]
Description
Import of the L-Server failed because a valid L-Server template is not registered.
Parameter
{0}: L-Platform name
Corrective Action
Check that there is an L-Server template registered that meets the following conditions:
There is one or fewer definitions for disk (<Disk> tag)
The definition for the server type (<ServerType> tag) matches the L-Server being imported
The CPU (<CPU> tag) and memory (<Memory> tag) are defined
(CPU and memory must also be defined if it is a physical server.)
The number of segments cannot exceed maximum number of segments set to this L-Platform[{0}].
Description
The number of segments cannot exceed the maximum number of segments set for the L-Platform.
Parameter
{0}: L-Platform ID
Corrective Action
Check the maximum number of segments set for the L-Platform.
The segment that is the controlled system for the firewall cannot be deleted.
Description
Segments controlled by a firewall cannot be deleted.
Corrective Action
Check if the network is controlled by a firewall.
Because there is only one segment in this L-Platform[{0}], it cannot be deleted.
Description
There is only one segment in this L-Platform so it cannot be deleted.
Parameter
{0}: L-Platform ID
Corrective Action
Delete the segment by either returning the L-Platform or creating another new segment first.
The segment where NIC exists cannot be deleted.
Description
The segment cannot be deleted because there is an NIC in it.
Corrective Action
Delete the NIC that is in the segment.
Network resource[{0}] does not exist.
Description
The network resource does not exist.
Parameter
{0}: Network resource ID
Corrective Action
Check if the network resource exists or if it is registered in the Resource Management function.
Resource [System-ID:{0}] doesn't exist.
Description
The instance for the specified L-Platform ID did not exist during the processing that sets up middleware parameters.
Parameter
{0}: L-Platform ID
Corrective Action
A conflict has occurred with the internal processing.
Contact Fujitsu technical support.
The system has been already set to SETUP. [{0}]
Description
The specified L-Platform has already been set to SETUP status.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the L-Platform.
Check whether there is an error with the specified L-Platform ID.
The system has not been set to SETUP. [{0}]
Description
The specified L-Platform has not been set to SETUP status.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the L-Platform.
Check whether there is an error with the specified L-Platform ID.
Unsupported operation. [Server-ID:{0}] is [vm_type:{1}]
Description
This operation is not supported.
Parameter
{0}: Server ID
{1}: Server's VM type
Corrective Action
Check whether the VMType of the specified L-Server is valid.
If the above does not apply, contact Fujitsu technical support.
Control NIC cannot be deleted.
Description
The control NIC cannot be deleted.
Corrective Action
Check whether there is a problem with the specified NIC.
Network Category is not specified.
Description
Network type has not been specified.
Corrective Action
Make sure that the network type is specified.
Configuration has been updated. [System-ID:{0}]
Description
The configuration of the specified L-Platform was modified after the application.
Parameter
{0}: L-Platform ID
Corrective Action
Apply to have the configuration modified again.
Resource[NETWORK-ID:{0}] already exist.
Description
The specified network ID segment already exists.
Parameter
{0}: Network ID
Corrective Action
Check whether the specified segment is correct.
If the above does not apply, contact Fujitsu technical support.
The maximum number of systems that can be deployed simultaneously has been exceeded. [System-ID:{0} deploying:{1} request:{2} limit:{3}]
Description
The maximum number of the L-Platform that can be deployed simultaneously has been reached.
Parameter
{0}: L-Platform ID
{1}: Number of the L-Platform that are being deployed
{2}: Requested number of the L-Platform to be deployed
{3}: Maximum number of the L-Platform that can be deployed
Corrective Action
Wait for a few moments, and then make another deployment request.
The maximum number of servers that can be deployed simultaneously has been exceeded. [System-ID:{0} deploying:{1} request:{2} limit:{3}]
Description
The maximum number of servers that can be deployed simultaneously has been reached.
Parameter
{0}: L-Platform ID
{1}: Number of servers that are being deployed
{2}: Requested number of servers to be deployed
{3}: Maximum number of servers that can be deployed
Corrective Action
Wait for a few moments, and then make another deployment request.
Operation cannot be executed because there is unread operation log. [System-ID:{0}][SLB:{1}]
Description
Operation cannot be executed because there is unread operation log.
Parameter
{0}: L-Platform ID
{1}: Server load balancer identifier information
Corrective Action
Refer to the log and then try again.
The snapshot exists in this server[{0}].
Description
There is a snapshot on the server.
Parameter
{0}: Server ID
Corrective Action
Redo the operation after deleting the snapshots.
Value is illegal. {0}=[{1}]
Description
There is an error with the specified parameter value.
Parameter
{0}: Item name of the parameter
{1}: Specified parameter
Corrective Action
A conflict has occurred with the internal processing.
Contact Fujitsu technical support.
The status of the deploy master is {0}. [System-ID:{1} User-ID:{2} Org-ID:{3}]
Description
The status of the deployment master is invalid.
Parameter
{0}: Status of the deployment master
{1}: L-Platform ID
{2}: User ID
{3}: Tenant name
Corrective Action
A conflict has occurred with the internal processing.
Contact Fujitsu technical support.
The server of [Server Name:{0}] doesn't exist.
Description
Either there is a problem with the server name, or the server has already been returned.
Parameter
{0}: Server name
Corrective Action
Check if the server name is correct.
The unknown error from the ROR when you try to check the system [System-ID:{0}] on ROR.
Description
The response status code from the Resource Management function is invalid (contains no error information).
Parameter
{0}: L-Platform ID
Corrective Action
Check if Resource Management function is operating normally.
Or, check that there are no errors in the following file for the connection destination information and authentication information settings for the Resource Management function:
[Windows Manager]
Installation_folder\RCXCFMG\config\vsys_config.xml[Linux Manager]
/etc/opt/FJSVcfmg/config/vsys_config.xml
If the error persists, contact Fujitsu technical support.
The unknown error from the ROR when you try to check the server [SERVER-ID:{0}] on ROR.
Description
The response status code from the Resource Management function is invalid (contains no error information).
Parameter
{0}: Server ID
Corrective Action
Check if Resource Management function is operating normally.
Or, check that there are no errors in the following file for the connection destination information and authentication information settings for the Resource Management function:
[Windows Manager]
Installation_folder\RCXCFMG\config\vsys_config.xml[Linux Manager]
/etc/opt/FJSVcfmg/config/vsys_config.xml
If the error persists, contact Fujitsu technical support.
The system of [System-ID:{0}] is existing in ROR. Its status cannot be changed to [undeploy].
Description
The L-Platform with the specified L-Platform ID exists on Resource Management.
Parameter
{0}: L-Platform ID
Corrective Action
Check the L-Platform status.
To forcibly remove the L-Platform, execute the command again with the "-f" option specified.
The server of [SERVER-ID:{0}] is existing in ROR. Its status cannot be changed to [undeploy].
Description
The server with the specified server name exists on Resource Management.
Parameter
{0}: Server ID
Corrective Action
Check the server status.
To forcibly remove the server, execute the command again with the "-f" option specified.
The flow status of instance is {0}. [System-ID:{1}]
Description
The L-Platform is in the middle of an application to return it.
Parameter
{0}: Submission status
{1}: L-Platform ID
Corrective Action
Go to the list of applications and either approve, assess, or cancel the application to unsubscribe the L-Platform.
If you cannot find the application in the list, release the application status with the recoverService command.
Refer to "12.12 recoverService (Disable L-Platform Application)" in the "Reference Guide (Command/XML) CE" for information on the recoverService command.
If none of the above applies, contact Fujitsu technical support.
Resource[Org-ID:{0} System Name:{1}] doesn't exist.
Description
The L-Platform ID that corresponds to the L-Platform name could not be obtained when the L-Platform recovery was launched.
Parameter
{0}: Tenant name
{1}: L-Platform name
Corrective Action
Check whether the L-Platform name of the information saved in the configuration when the recovery was launched, and the L-Platform name specified in the recovery command input file, is valid.
If none of the above applies, contact Fujitsu technical support.
Settings[{0}] do not match. [System-ID:{1}]
Description
An input information error was discovered when the L-Platform recovery was launched.
Parameter
{0}: Location of error discovery
{1}: L-Platform ID
Corrective Action
If "SERVER" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file server definition, is valid.
If "IPADDRESS" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file IP address definition, is valid.
If "DISK" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file disk definition, is valid.
If "NETWORK" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file network definition, is valid.
If none of the above applies, contact Fujitsu technical support.
The disk of [DISK-ID:{0}] is existing in ROR. Its status cannot be changed to [undeploy].
Description
A disk with the specified disk ID already exists.
Parameter
{0}: Disk ID
Corrective Action
Check the disk status.
To delete the disk by force, specify the "-f" option then re-execute the command.
The disk of [DiskName:{0}] doesn't exist.
Description
The disk with the specified disk name does not exist.
Parameter
{0}: Disk ID
Corrective Action
Check whether the disk name specified in the unnecessary data deletion command data is valid.
Value is illegal. [{0}]
Description
There is an error with the value specified in the server specification.
Parameter
{0}: Parameter name in the server specification
Corrective Action
Check for any errors with the values in the server specification that were specified at deployment time.
If the cause of the problem is other than the above, contact Fujitsu technical support.
Resource ID is null. [L-Server Name:{0}]
Description
The resource ID cannot be obtained.
Parameter
{0}: L-Server name
Corrective Action
Check whether the L-Server name specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.
Image does not exist. [Image ID:{0}]
Description
The image information does not exist.
Parameter
{0}: Image ID
Corrective Action
Check whether the image ID specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.
The server is already imported. [L-Server Name:{0}]
Description
The L-Server has already been imported.
Parameter
{0}: L-Server name
Corrective Action
Check whether the L-Server name specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.
No NIC on the server. [L-Server Name:{0}]
Description
The L-Server does not have a NIC.
Parameter
{0}: L-Server name
Corrective Action
L-Servers that do not have NICs cannot be imported.
Pool does not exist. [Pool Name:{0}]
Description
The specified pool does not exist.
Parameter
{0}: Pool name
Corrective Action
Check whether the pool name specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.
Invalid Software-ID. [L-Server Name:{0}]
Description
The software ID is invalid.
Parameter
{0}: L-Server name
Corrective Action
Check whether the software ID specified for the L-Server import (cfmg_importlserver) command is correct, and whether software information for an operating system has been specified.
If the cause of the problem is other than the above, contact Fujitsu technical support.
The input value is illegal. [Tag name: {0}]
Description
There is a problem with an input value in the firewall or the server load balancer update process.
Parameter
{0}: Tag name
Corrective Action
An inconsistency occurred in internal operations.
Contact Fujitsu technical support.
LNetDev resource id is null. [System-ID:{0}][LNetDev Name:{1}]
Description
Could not obtain the resource ID for the firewall or the server load balancer.
Parameter
{0}: L-Platform ID
{1}: LNetDev name
Corrective Action
An inconsistency occurred in internal operations.
Contact Fujitsu technical support.
The server cloning in the system[{0}] exists.
Description
The server cloning in the L-Platform exists.
Parameter
{0}: L-Platform ID
Corrective Action
Check the status of the managed server, and then try again.
Network resource does not exist. [Network Resource Name:{0}]
Description
Network resource does not exist.
Parameter
{0}: Network resource name
Corrective Action
Check whether the network resources set for the import target L-Server specified in the L-Server import (cfmg_importlserver) command exist in the import destination tenant.
If none of the above applies, contact Fujitsu technical support.
Because the number of servers in the system became 0, the server cannot be deleted. [System-ID:{0}]
Description
If the add and remove server operations are executed at the same time and the attempt to add the server fails, server deletion processing is cancelled because there are no servers in the L-Platform.
Parameter
{0}: L-Platform ID
Corrective Action
Eliminate the cause of the failure to add the server, and then re-execute the operation to remove the server.
No interface definition on the LNetDev. [System-ID:{0}]
Description
An interface is not defined in the firewall or the server load balancer.
Parameter
{0}: L-Platform ID
Corrective Action
Check whether the L-Platform template firewall or the server load balancer settings are valid.
If none of the above applies, contact Fujitsu technical support.
Can't move the system. [System-ID:{0}][Reason:{1}]
Description
The specified L-Platform cannot be moved.
Parameter
{0}: L-Platform ID
{1}: Cause
Corrective Action
Confirm the cause which is displayed.
Folder name is duplicated. [Tenant-Name:{0}][System-ID:{1}]
Description
A folder with the same name as the L-Platform folder you tried to move to the specified move destination tenant already exists.
Parameter
{0}: Tenant name
{1}: L-Platform name
Corrective Action
Check whether a folder with the same name as the L-Platform folder you tried to move to the move destination tenant already exists.
The state of L-Server is illegal. [L-Server Name:{0}]
Description
Invalid L-Server power source status.
Parameter
{0}: L-Server name
Corrective Action
Check the import target L-Server power source status that is specified in the L-Server import (cfmg_importlserver) command.
If the import target L-Server exists outside the tenant, it will be necessary to set the power source of the import target L-Server to OFF.
User doesn't belong to the tenant. [Tenant-Name:{0}][User-ID:{1}]
Description
The user does not belong to the specified tenant.
Parameter
{0}: Tenant name
{1}: User ID
Corrective Action
Confirm which tenant the specified user belongs to.
The specified tenant name is illegal. [Org-ID:{0}]
Description
The tenant name is illegal.
Parameter
{0}: Tenant name
Corrective Action
Check whether the tenant name specified in the L-Server import (cfmg_importlserver) command is valid.
The specified user does not exist. [Org-ID:{0}][User-ID:{1}]
Description
The user does not exist.
Parameter
{0}: Tenant name
{1}: User ID
Corrective Action
Check whether the user or tenant name specified in the L-Server import (cfmg_importlserver) command is valid.
Template does not exist. [System-ID: {0}][Template-ID: {1}][Template-Name: {2}]
Description
The L-Platform template does not exist.
Alternatively, there are multiple L-Platform templates using the same name.
Parameter
{0}: L-Platform ID
{1}: L-Platform Template ID
{2}: L-Platform Template name
Corrective Action
If an L-Platform template with the displayed name does not exist, retry after creating an L-Platform template.
If multiple L-Platform templates are using the displayed name, correct the template ID in the additional information file and retry.
The state of the power supply of the server cannot be acquired. [System-ID: {0}]
Description
The state of the power supply of the server in the specified L-Platform cannot be acquired.
Parameter
{0}: L-Platform ID
Corrective Action
Check whether the specified L-Platform ID is valid.
If the above does not apply, contact Fujitsu technical support.
Cannot start servers of the tenant [{0}]: {1}
Description
The servers of a specified tenant cannot be started because of one of the following causes.
There is an L-Platform being deployed or reconfigured, or there is no L-Platform in normal state.
There is an L-Platform locked by another user.
There is an L-Platform in an application process.
There is a server being started, stopped, backed up, restored, or cloned.
There is no stopped server that is subject to collective power operation.
Parameter
{0}: Tenant name
{1}: Cause
Corrective Action
Retry the operation after the cause is removed.
All the specified tenants have some errors.
Description
There is no tenant of which the servers can be started or stopped because all the specified tenants have some errors.
Corrective Action
Deal with VSYS10588 or VSYS10590 messages output for each tenants.
Cannot stop servers of the tenant [{0}]: {1}
Description
The servers of a specified tenant cannot be stopped because of one of the following causes.
There is an L-Platform being deployed or reconfigured, or there is no L-Platform in normal state.
There is an L-Platform locked by another user.
There is an L-Platform in an application process.
There is a server being started, stopped, backed up, restored, or cloned.
There is no running server that is subject to collective power operation.
Parameter
{0}: Tenant name
{1}: Cause
Corrective Action
Retry the operation after the cause is removed.
Because there is only one server in the system, the server cannot be deleted. [System-ID:{0}][Server Name:{1}]
Description
There is only one L-Server on the L-Platform, so the specified server cannot be deleted.
Parameter
{0}: L-Platform ID
{1}: Server name
Corrective Action
Delete the server by either returning the L-Platform or creating another new server first.
The number of L-Servers exceeds the limit. [System-ID:{0}][Server-Name:{1}]
Description
The server cannot be imported because doing so would exceed the maximum number of L-Servers for the L-Platform.
Parameter
{0}: L-Platform ID
{1}: Server name
Corrective Action
Check the maximum number of L-Servers set for the L-Platform.
The number of NICs exceeds the limit. [System-ID:{0}][Server-Name:{1}]
Description
The server cannot be imported because doing so would exceed the maximum number of NICs for the segment on the L-Platform.
Parameter
{0}: L-Platform ID
{1}: Server name
Corrective Action
Check the maximum number of NICs set for segments on the L-Platform.
The number of segments exceeds the limit. [System-ID:{0}][Server-Name:{1}]
Description
The server cannot be imported because doing so would exceed the maximum number of segments on the L-Platform.
Parameter
{0}: L-Platform ID
{1}: Server name
Corrective Action
Check the maximum number of segments set for the L-Platform.
The system status cannot be set to specified status. [{0}]
Description
Cannot change the specified status.
Parameter
{0}: Specified status string
Corrective Action
Check that there are no errors in the specified status string.
Deploying the L-Platform is unsupported. [System-ID:{0}]
Description
Deployment of Solaris container servers is not supported.
Parameter
{0}: L-Platform ID
Corrective Action
Check whether the VMType of the L-Server template is valid.
If the above does not apply, contact Fujitsu technical support.
Resource [Task-ID:{0}] does not exist.
Description
The task for the server load balancer operation does not exist.
Parameter
{0}: Task ID
Corrective Action
A conflict has occurred with the internal processing.
Contact Fujitsu technical support.