3.1 Setup Wizard

This section explains the initial setup using the Setup Wizard.

Use the following procedure:

Select the [Home] tab from the ROR Console, and then click [Setup Wizard] displayed on the Tools of the Functions list.
Start the initial setup from the displayed window.
The following eight steps are required.
In each step, click <Next> to move to the next step, and click <Back> to return to the previous step. In the last step, click <Finish> to complete the initial setup. To move to the next step without changing the current settings in each step, simply click <Next>.
Perform the following settings in each step. For details of the setting items for each step, refer to the table below.
Application Process
Select whether approval and assessment (application process) should be performed for L-Platform usage application, configuration modification, and cancellation.
Email
Enter the SMTP server name, port number, and sender's email address.
Tenant
Enter the parameters for tenant management settings.
L-Platform1/2
Enter the parameters for L-Platform settings.
L-Platform2/2
Enter the parameters for L-Platform settings.
Accounting
Enter the parameters for usage fees for the L-Platform and Accounting Tabs.
OS Property
Enter the parameters to set for the OS when creating the virtual L-Server.
Confirm
The content of the settings can be checked.
Note
- If the application process checkbox is being changed from on to off after the manager starts its operation, make sure that there are no pending processes before changing it. If there are pending processes, finish all of them by cancelling, approving, rejecting, accepting, or dismissing each of them.
- Set the following settings on "L-Platform 1/2" and "L-Platform 2/2" before operations commence. This attribute cannot be switched once operations have commenced.
  - Overcommit function
  - System disk for physical L-Servers
  - Setting method for host name
  - Setting method for L-Server's resource name
  - Setting method for folder's resource name
Restart the manager for the settings (except OS Property) to take effect.

This table contains the settings involved for each step.

Step		Setting Items	Description
Step 1 Application Process		L-Platform subscription	The Application Process regarding L-Platforms can be set. In the setup wizard, the six items explained in "19.2.3 Setting Application process settings" and "19.2.4 Setting Application process to be used" in the "Setup Guide CE" are displayed grouped into three items. When the items in the setup wizard are not checked, "false" is set for the corresponding item described in "19.2.3 Setting Application process settings". When the items are checked, "true" is set. For the items described in "19.2.4 Setting Application process to be used", the definitions corresponding to the items checked in the setup wizard are configured. For details, refer to "19.2.3 Setting Application process settings" and "19.2.4 Setting Application process to be used" in the "Setup Guide CE".
		L-Platform reconfiguration
		L-Platform cancellation
Step 2 Email		SMTP server name	The host name and port number of the SMTP server, and the sender's mail address can be set. Also, when all parameters are defined, the Mail Sending function is enabled, and SMTP server authentication is defined as none. For details, refer to each setting of "19.1 Settings for Sending Email" in the "Setup Guide CE".
		Port number
		Sender's email address
Step 3 Tenant		Perform user management by tenant administrator	Settings for management of users by the tenant administrator and the reflection of information on the directory service when registering users can be set. For details, refer to each setting of "8.6.1 Settings for Tenant Management and Account Management" in the "Operation Guide CE".
		Setting method for registering a tenant user by tenant administrator
		Update user information to the directory service
Step 4 L-Platform1/2		Overcommit function	The L-Platform Management overcommit function can be set. When "Enable" is selected, the definition for displaying the reserved CPU frequency and memory in the System Condition Server List is also made. Neither the number of CPUs nor the memory size set in "Display Function Settings for Estimated Price" and "Usage Charge Calculator Settings", which are settings related to the overcommit function, are set here. Please change the setting if necessary. For details, refer to "19.6 Settings for the Overcommit Function" in the "Setup Guide CE" and "8.8 System Condition Server List Setting" in the "Operation Guide CE".
		Distribution ratio setting method	The simple selection method for the distribution ratios of CPUs and memory that corresponds to the distribution ratio settings of VMware can be set. For details, refer to "8.5.4 Distribution Ratio Setting" in the "Operation Guide CE".
		Reconfigure an L-Platform from the template	When making an L-Platform usage application, the value specified in the L-Platform template can be modified. For details, refer to "8.5.1 Settings for Permissions to Change L-Platform Templates" in the "Operation Guide CE".
		Server specification setting method	When making an L-Platform usage application, or when changing the configuration of an L-Platform, the server specification setting method can be set. For details, refer to "8.5.3 Settings for the Simplified Reconfiguration Function" in the "Operation Guide CE".
		Segment display method	When performing an application to use an L-Platform, the method for setting up the subnets that are allocated to segments be can set. For details, refer to "8.5.2 Subnet Settings at Segment Editing" in the "Operation Guide CE".
		System disk for physical L-Servers	When a physical L-Server is deployed from the L-Platform window, the disk to use as the system disk for the physical L-Server can be set. For details, refer to "19.9 System Disk Settings for Physical L-Servers" in the "Setup Guide CE".
Step 5 L-Platform2/2		Setting method for host names	The Host Name of the virtual server can be set. "Tenant name + sequential number" is displayed, only when "tenant name + sequential number" is specified in the host name settings for virtual servers. The settings cannot be modified from other settings to "tenant name + sequential number". For details, refer to "19.4 Setting the Host Names for Virtual Servers" in the "Setup Guide CE".
		Setting method for the L-Server's resource name	The setting method for the resource names of the folders and the L-Server of the L-Platform created when applying to use an L-Platform can be set. For details, refer to "19.5 Setting the Method for Setting Resource Names" in the "Setup Guide CE".
		Setting method for the folder's resource name
Step 6 Accounting		Usage fee (estimated price) for L-Platform Tab	It is possible to set whether to display the Usage fee (the estimated price) on the L-Platform Tab in the L-Platform Management window based on L-Platform template accounting information. For details, refer to "8.7.1 Display Function Settings for Estimated Price" in the "Operation Guide CE".
		Display of the Accounting tab	The usage charge calculator function can be set. For details, refer to "8.7.3 Usage Charge Calculator Settings" in the "Operation Guide CE".
		Default cut-off date
		Default receiver's email address for usage fee information
Step 7 OS Properties	Windows	Domain name	The default values of the information on the [OS] tab, etc. can be set when creating a virtual L-Server. For details, refer to "Appendix C.1.7 OS Property Definition File" in the "Setup Guide CE".
		Full name
		Organization name
		Product key
		License mode
		Administrator password
		Confirm password
	Linux	Domain name
		DNS search path
		Hardware clock setting
	Windows/Linux	Primary DNS server
	Windows/Linux	Secondary DNS server

Point

In the setup wizard, the items explained in the sections indicated below are configured.

"Chapter 8 Changing Settings" in the "Operation Guide CE"
"Chapter 19 Customizing Environments" in the "Setup Guide CE"
"C.1.8 OS Property Definition File" in the "Setup Guide CE"

Start the setup wizard, and configure any items that need to be changed but are not configured in the setup wizard.

"Setup Guide CE"

"Chapter 8 Creating Definition Files"

8.1 Definition Files (For Both Physical L-Servers and Virtual L-Servers)

8.2 Definition Files (For Physical L-Servers)

8.3 Definition Files (For Virtual L-Servers)

8.4 Definition Files (Network)

"Chapter 19 Customizing Environments"

19.2.1 Registering an Application Process Assessor

19.3 Customizing the Dashboard

19.10 Setting for the Restarting Managers

19.11 Changing Multiple Operations of Managers

19.12 Edit the License Agreement

19.13 Editing the User Agreement when Registering a User

"Operation Guide CE"

"Chapter 8 Changing Settings"

8.5.6 Editing the Environment Setup File for the L-Platform API

8.5.7 Edit the License Agreement

8.5.8 Settings when RHEL5-Xen is used

8.5.9 Default Password Setting for Sent Emails

8.5.10 Settings for the Maximum Number of Connections for the L-Platform Template

8.5.11 Customizing the User Rights for L-Platform Operations

8.6 Settings for Tenant Management and Account Management

8.7 Accounting Settings

8.8 System Condition Server List Settings

8.9 Settings for Event Log Output for CMDB Agent