VLAN types and IDs set on the external connection ports of a managed LAN switch blade can be changed.
Note
VLANs cannot be changed on PRIMERGY BX900/BX400 LAN switch blades operating in IBP mode.
If the port VLAN ID is unspecified or 1, a tagged VLAN ID cannot be set to 1.
When using End-Host Mode for the following LAN switch blades, cannot modify a port vlan id, and remove a tag vlan for the external ports which meet the follwoing conditions.
When doing the operation, inactivate a target external port, or change vlan id for internal ports which have the same vlan id as a target external port.
PY CB Eth Switch/IBP 1Gb 36/8+2
PY CB Eth Switch/IBP 1Gb 36/12
PY CB Eth Switch/IBP 1Gb 18/6
The port is selected as Selected Port
The port is activated
More than one internal port have the same vlan.
Changing VLAN IDs
This section explains how to change VLAN IDs set on the external ports of a LAN switch.
With Port VLANs
Use the following procedure to change VLAN IDs:
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.
The [VLAN Settings] dialog is displayed.
To use this feature, the following settings must first be defined:
Select "Change" and select the VLAN ID that has been changed.
Select [Untagged] from the VLAN type of the port number to configure or link aggregation group name.
Click <OK>.
The VLAN ID is changed.
With Tagged VLANs
First delete the VLAN ID was set on the desired LAN switch blade port before setting the new VLAN ID.
Use the following procedure to change VLAN IDs:
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.
The [VLAN Settings] dialog is displayed.
To use this feature, the following settings must first be defined:
Select "Change" and select the VLAN ID that has been changed.
Select [None] from the VLAN type of the port number to configure or link aggregation group name.
Click <OK>.
The VLAN ID set for the selected LAN switch blade port is released.
Repeat step 1 and set the new VLAN ID in the [VLAN Settings] dialog.
Select "Create new" or "Change" in the VLAN information and select the VLAN ID to be changed.
Select [Tagged] from the VLAN type of the port number to configure or link aggregation group name.
Click <OK>.
The VLAN ID is changed.
Changing VLAN Types
This section explains how to change the types of VLAN (port or tagged VLAN) set on the external ports of a LAN switch.
Use the following procedure to change VLAN types:
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.
The [VLAN Settings] dialog is displayed.
To use this feature, the following settings must first be defined:
Select "Change" and select the VLAN ID that has been changed.
Change the VLAN type (Untagged] or [Tagged]) of the port number to configure or link aggregation group name.
Click <OK>.
The VLAN type is changed.
Deleting VLAN IDs
This section explains how to delete VLAN IDs.
Deleting VLAN IDs from LAN switch blades
Use the following procedure to delete VLAN IDs:
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.
The [VLAN Settings] dialog is displayed.
To use this feature, the following settings must first be defined:
Select "Change" and select the VLAN ID that has been changed.
Click <Delete>.
The VLAN ID is deleted.
Deleting VLAN IDs from LAN switch ports
Use the following procedure to delete VLAN IDs:
In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from the popup menu.
The [VLAN Settings] dialog is displayed.
To use this feature, the following settings must first be defined:
Select "Change" and select the VLAN ID that has been changed.
Select [None] from the VLAN type of the port number to delete VLANs or link aggregation group name.
Click <OK>.
The VLAN ID is deleted.
