Systemwalker Service Quality Coordinator Reference Guide

5.1 Common Messages

This section explains messages that are common to Windows, Solaris, and Linux.

Two event IDs are shown in the "Event ID" column. The top event ID is for Window and the bottom one is for Solaris and Linux.

Event ID	Category	Message	Action
0602	Error	Invalid argument '%1'.	[Meaning] Invalid parameter passed to a function in an internal process. %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA0602E
1000	Information	%1 started.	[Meaning] Process has started. %1: Process name [Action] No action is necessary.
DSA1000I
1001	Information	%1 stopped.	[Meaning] Process has stopped. %1: Process name [Action] No action is necessary.
DSA1001I
1200	Information	Started DSA '%1' (%2)	[Meaning] DSA has started. %1: DSA name %2: Module path [Action] No action is necessary.
DSA1200I
1202	Information	Sending stop signal to DSA '%1'	[Meaning] Stop signal transmitted to DSA. %1:DSA name [Action] No action is necessary.
DSA1202I
1302	Error	Stopping DCM due to the critical space notification.	[Meaning] DCM stopped because disk usage reached the critical threshold. [Action] Reserve enough free disk space, and then restart DCM.
DSA1302E
1304	Error	Too many attempts to start process. DCM cannot restart. : %1.	[Meaning] Process %1 is stopping because it cannot restart. The problem might occur by a coordinated product. [Action] Restart Systemwalker SQC DCM service. Restart the Systemwalker SQC DCM service after removing the problem when the problem occurs by a coordinated product. <In case of Interstage Application Server linking (under Java EE environment) or WebLogicServer linking(*)> Check that the path specified to the JAVA_HOME key in template.dat is correct. If it is wrong, correct it, setup, and then restart Systemwalker Service Quality Coordinator DCM service. *) In case that the string of "Process %1" includes "java".
DSA1304E
1310	Error	DCM cannot start because at least one DSA is already running.	[Meaning] More than one DSA is running, therefore DCM cannot start. [Action] If DCM was started soon after stopping a DSA, then DCM may not start because the DSA is still in the process of stopping. Pause for a short time and confirm that DSA has stopped, then try starting DCM again. If it cannot be restarted after the short pause, collect the maintenance information and contact a systems engineer.
DSA1310E
1551	Error	DSA: %1. Thread %2.%n,Parameter '%3' is incorrect. DSA will terminate.	[Meaning] Invalid parameters in the operation definition file. %1: DSA name %2: Thread ID %3: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA1551E
1565	Error	Failed to read performance data from the remote machine %1 %2	[Meaning] Failed to acquire performance data from remote machine. %1: Remote machine name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1565E
1566	Error	Logon failed. Check that the 'domain', 'user', and 'password' parameters are correct. %1	[Meaning] Failed to log in. Invalid parameters in the connection definition file. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1566E
1701	Error	Failed to open PDB database: %1.	[Meaning] Failed to open the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1701E
1800	Information	PDB database is created successfully.	[Meaning] PDB was created successfully. [Action] No action is necessary.
DSA1800I
1900	Error	Failed to open PDB database: %1.	[Meaning] Failed to open the PDB. %1: Error message [Action] Collect the maintenance information and contact a Fujitsu SE.
DSA1900E
1902	Error	Failed to create PDB database, SQL file execution failed: %1.	[Meaning] Failed to create the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1902E
1903	Error	Failed to create PDB database, SQL file execution failed: %1.	[Meaning] Failed to create the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer
DSA1903E
1906	Error	Failed to execute transaction against the PDB database: %1.	[Meaning] Failed to execute transaction against the PDB database. %1:Error message [Action] This message is normally output when an error occurs while a record is being written to the PDB. If the message indicates that the "database is locked", there may be a conflict between the process of writing collected data and the process of reading content display. If this problem does not occur frequently, no action is necessary. In all other cases, collect the maintenance information and contact a systems engineer.
DSA1906E
1907	Error	Failed to update PDB database, SQL file execution failed: %1	[Meaning] Failed to update the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer
DSA1907E
1908	Error	Failed to update PDB database, TRD file execution failed: %1.	[Meaning] Failed to update the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1908E
1909	Error	Database update error. Failed to create field_name_backup table: %1.	[Meaning] Failed to update the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1909E
1910	Error	Database update error. Failed to delete field_name_backup table: %1.	[Meaning] Failed to update the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1910E
1911	Error	Failed to allocate memory block: out of memory.	[Meaning] Failed to allocate memory block: out of memory. [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, collect the maintenance information and contact a systems engineer.
DSA1911E
1912	Error	Failed to attach database '%1': %2.	[Meaning] Failed to attach file to PDB. %1: Database file name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1912E
1913	Error	Failed to create data database, SQL file execution failed: %1.	[Meaning] Failed to create the PDB. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1913E
1914	Error	Failed to execute system register SQL against the PDB database: %1.	[Meaning] Failed to execute system register against the PDB database. %1:Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1914E
1915	Error	Failed to read the PDB database configuration from the system_database table.	[Meaning] Failed to read PDB definition. [Action] Collect the maintenance information and contact a systems engineer.
DSA1915E
1916	Error	Failed to detach database '%1': %2.	[Meaning] Failed to detach file from PDB. %1: Database file name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1916E
1917	Error	Failed to open database file '%1': %2.	[Meaning] Failed to open the PDB. %1:Path name %2:Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1917E
1918	Error	Failed to read the PDB database tables information from the system_tables table.	[Meaning] Failed to read PDB table information. [Action] Collect the maintenance information and contact a systems engineer.
DSA1918E
1919	Error	Failed to access/create PDB database directory '%1': %2	[Meaning] Failed to access/create PDB directory. %1: Directory name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA1919E
2000	Information	The module received the Stop signal.	[Meaning] The process received a stop instruction. [Action] No action is necessary.
DSA2000I
2001	Information	Remote server is %1 on port %2.	[Meaning] Displays remote server information. %1:Host name or IP address %2:Port number [Action] No action is necessary.
DSA2001I
2002	Information	Listening on port %1.	[Meaning] This message indicates that a connection is waiting to be established. %1:Port number [Action] No action is necessary.
DSA2002I
2100	Error	DSA initialization failed with code %1.	[Meaning] Failed to initialize during DSA startup. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2100E
2101	Error	The module halted due to an unrecoverable error.	[Meaning] The process has stopped due to an unrecoverable error. [Action] A message showing details about the error is output before this message, so use that message to correct the problem.
DSA2101E
2102	Error	No server name specified.	[Meaning] No server name is specified for the Manager to be connected to. [Action] Correctly specify the name of the server for the Manager to be connected to in the "server=" part of the [DsaForwarder] and [DsaForwarder_sum] sections in the DSAconfiguration.txt file.
DSA2102E
2103	Error	No port or service name specified.	[Meaning] No port number was specified for the remote Manager. [Action] Ensure that the "port=2344" segment of the [DsaForwarder] and [DsaForwarder_sum] sections in the DSAconfiguration.txt file is correct.
DSA2103E
2174	Error	Failed to parse config section. %1	[Meaning] Failed to parse section. %1: Section name [Action] Collect the maintenance information and contact a systems engineer.
DSA2174E
2175	Error	Failed to validate config section. %1	[Meaning] Failed to enable section. %1: Section name [Action] Collect the maintenance information and contact a systems engineer.
DSA2175E
2176	Error	Failed to open and parse the DSA groups file '%1'. %2%3	[Meaning] Failed to open or parse DSA groups file. %1: File name %2: %3: [Action] Collect the maintenance information and contact a systems engineer.
DSA2176E
2177	Error	DSA groups file '%1' does not define any groups.	[Meaning] Groups not defined in DSA groups file. %1: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA2177E
2300	Error	The DSA function %1 failed with error: %2	[Meaning] Processed failed. %1:Process name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2300E
2301	Error	The input record is invalid: %1	[Meaning] The input record is invalid. %1: Record [Action] Collect the maintenance information and contact a systems engineer.
DSA2301E
2302	Error	No default or input command is specified for record: %1	[Meaning] Record does not contain valid information. %1: Record [Action] Collect the maintenance information and contact a systems engineer.
DSA2302E
2304	Error	Failed to get the return code for the command '%1'. System error: %2	[Meaning] Failed to get the return code for the command. %1: Command name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2304E
2305	Error	Memory allocation failed for a block size of %1	[Meaning] Memory allocation failed. %1:Size of block of memory tried to be allocated [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, contact a Fujitsu SE.
DSA2305E
2306	Error	Failed to open bad file. DSA error=%1	[Meaning] Failed to open the "bad" file. %1: Error Code [Action] Collect the maintenance information and contact a systems engineer.
DSA2306E
2307	Error	Invalid specified or default '%1=%2'	[Meaning] Specified parameter is invalid. %1: Parameter name %2: Value [Action] Make sure that there are no errors in the definition, and then execute sqcSetPolicy (Policy Application Command).
DSA2307E
2308	Error	Unable to obtain the path to the working directory.	[Meaning] Unable to acquire the working directory path. [Action] Collect the maintenance information and contact a systems engineer.
DSA2308E
2309	Error	Command '%1' is not processed.	[Meaning] Command not processed. %1: Command name [Action] Collect the maintenance information and contact a systems engineer.
DSA2309E
2310	Error	At least one each of a RDF and TDF file must be specified if TIS processing is required.	[Meaning] RDF or TDF file not specified. [Action] Collect the maintenance information and contact a systems engineer.
DSA2310E
2311	Error	Invalid parameter format: '%1=%2'.	[Meaning] Invalid parameter format. %1: Parameter name %2: Value [Action] Collect the maintenance information and contact a systems engineer.
DSA2311E
2312	Error	Failed to find %1 file '%2'.	[Meaning] File does not exist. %1: File type %2: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA2312E
2313	Error	Failed to open file '%1'. Command '%2' is not processed. Error = %3.	[Meaning] Command not executed due to failure to open file. %1: File name %2: Command name %3: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2313E
2314	Error	Maximum command process time of %1 seconds exceeded. Command aborted: %2	[Meaning] Maximum command process time exceeded. Processing stopped. %1: Second %2: Command name [Action] Collect the maintenance information and contact a systems engineer.
DSA2314E
2315	Error	Internal error: Invalid parameter passed to a function.	[Meaning] An internal error occurred. [Action] Collect the maintenance information and contact a systems engineer.
DSA2315E
2316	Error	TIS interface error=%1.	[Meaning] TIS interface error occurred. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2316E
2317	Error	TIS error=%1	[Meaning] TIS error occurred. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2317E
2318	Error	Failed to execute command %1. Error=%2.	[Meaning] Command failed. %1: Command name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2318E
2319	Error	Command to be executed is empty.	[Meaning] Command to be executed is empty. [Action] Collect the maintenance information and contact a systems engineer.
DSA2319E
2320	Error	The command '%1' could not be expanded.	[Meaning] Command could not be expanded. %1: Command name [Action] Collect the maintenance information and contact a systems engineer.
DSA2320E
2321	Error	The command '%1' expanded to a size greater than the maximum allowable size of %2.	[Meaning] Expanded size of command exceeds its allocated size. %1: Command name %2: Size [Action] Collect the maintenance information and contact a systems engineer.
DSA2321E
2322	Error	Failed to find command '%1'.	[Meaning] Failed to find command. %1: Command name [Action] Collect the maintenance information and contact a systems engineer.
DSA2322E
2326	Error	Failed to open file '%1'. Error = %2.	[Meaning] Failed to open the file. %1: File name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2326E
2327	Error	Entry point '%1' not found in module '%2'. Error=%3.	[Meaning] Entry point not found. %1: Entry point name %2: Module name %3: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2327E
2330	Error	Failed to read from file '%1'. Error=%2.	[Meaning] Failed to read the file. %1: File name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2330E
2500	Error	Invalid parameters.	[Meaning] Invalid parameters. [Action] Collect the maintenance information and contact a systems engineer.
DSA2500E
2502	Error	Failed to write a record into a temporary output file.	[Meaning] Failed to write a record into a temporary output file. It might be a capacity shortage of output destination of log data (Troubleshoot). [Action] Please secure the free space of the disk in log data (Troubleshoot) output destination, and restart the residing process. If the problem cannot be resolved with the above mentioned action, collect the maintenance information and contact a systems engineer.
DSA2502E
2503	Error	Failed to access the output file '%1'	[Meaning] Failed to access the output file. %1: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA2503E
2505	Error	Failed to rename the file '%1' to '%2'.	[Meaning] Failed to rename the file. %1: Old file name %2: New file name [Action] Collect the maintenance information and contact a systems engineer.
DSA2505E
2506	Error	Failed to open the temporary output file '%1'	[Meaning] Failed to open the temporary output file. %1: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA2506E
2507	Error	Failed to append file '%1' to '%2'.	[Meaning] Could not add to file. %1: Input file name %2: Output file name [Action] Verify that there is space available in the temporary directory. If there is space available, collect the maintenance information and contact a systems engineer.
DSA2507E
2508	Error	Failed to access/create output directory '%1': %2.	[Meaning] Failed to access/create output directory. %1: Directory name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA2508E
2700	Error	Unable to connect to the server.	[Meaning] An attempt to connect to the Manager has failed. [Action] Check the following: 1. Check that the Manager is operating correctly. 2. Check that a network connection to the Manager can be established. 3. Check that the Manager host name or IP address defined in the relevant server is correct. For the methods used to check and change definitions, refer to Section 6.4.1, "Changing the IP address of the Manager that is recognized by Agents and Proxy Managers" in the Installation Guide. 4. This message may be output after the high load on the Agent/Proxy Manager system that triggered the message has since been reduced. If this occurs, restart the DCM service or daemon and see if this rectifies the problem. If the message appears even after taking the above action, collect the maintenance information and contact a systems engineer.
DSA2700E
2701	Error	Unable to transmit data to the server.	[Meaning] Data could not be sent to the Manager. [Action] If this message is not output repeatedly, the failure to transfer was temporary and transmission was restored, therefore no action is necessary. If the message continues to appear check the following: Check whether the Manager is running correctly If the Manager is operating normally, collect the maintenance information and contact a systems engineer..
DSA2701E
2702	Error	Login rejected by the server.	[Meaning] Login to the Manager was refused. [Action] Check whether the Manager is running correctly. If the Manager is operating normally, collect the maintenance information and contact a systems engineer.
DSA2702E
2951	Error	System call (%1) failed: %2	[Meaning] System call failed. %1: System call name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA2951E
3073	Warning	Maximum command process time of %1 seconds exceeded. Command aborted: %2.	[Meaning] Because the command executed to collect performance information at collection intervals of one to ten minutes exceeded the %1 second, processing has been stopped. %1:Execution watch time of the command %2:Detailed information [Action] This message will output when the processing of the command is delayed because of the high system load etc. The action is unnecessary if not generated frequently at collection intervals. If the detailed information is "netstat -a", refer to section 3.1, "I cannot collect WIN_NET_SYSTEM or UX_NET_SYSTEM information" in the Troubleshooting Guide.
DSA3073W
3100	Error	The DSA function '%1' failed. Error='%2'.	[Meaning] Processed failed. %1: Function name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3100E
3101	Error	The specified end date and time of '%1' is not greater than the start date and time of '%2'.	[Meaning] The specified end date and time is later than the start date and time. %1: End date %2: Start date [Action] Collect the maintenance information and contact a systems engineer.
DSA3101E
3102	Error	The specified interval is not valid: '%1=%2'.	[Meaning] The specified interval is not valid. %1: Interval %2: Value [Action] Collect the maintenance information and contact a systems engineer.
DSA3102E
3104	Error	Invalid specified or default '%1=%2'.	[Meaning] Invalid parameter format. %1: Parameter %2: Value [Action] Make sure that there are no errors in the definition, and then execute sqcSetPolicy (Policy Application Command).
DSA3104E
3105	Error	Invalid parameter format: '%1=%2'.	[Meaning] Invalid parameter format. %1: Parameter %2: Value [Action] Collect the maintenance information and contact a systems engineer.
DSA3105E
3106	Error	Unable to convert date and/or time '%1=%2' parameter to valid time.	[Meaning] Unable to convert time parameter to valid time. %1: Time %2: Value [Action] Collect the maintenance information and contact a systems engineer.
DSA3106E
3108	Error	Failed to parse the bad file name '%1'.	[Meaning] Failed to parse file name. %1: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA3108E
3109	Error	The parameter '%1=%2' is less than zero.	[Meaning] The parameter is less than 0. %1: Parameter %2: Value [Action] Collect the maintenance information and contact a systems engineer.
DSA3109E
3110	Error	Failed to find %1 file '%2'.	[Meaning] File does not exist. %1: Type %2: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA3110E
3111	Error	At least one each of a RDF and TDF file must be specified if TIS processing is required.	[Meaning] Specify either a RDF or TDF file. [Action] Collect the maintenance information and contact a systems engineer.
DSA3111E
3115	Error	Unable to obtain the path to the working directory.	[Meaning] Unable to obtain the path to the working directory. [Action] Collect the maintenance information and contact a systems engineer.
DSA3115E
3116	Error	Failed to find command '%1'.	[Meaning] Failed to find command. %1: Command name [Action] Collect the maintenance information and contact a systems engineer.
DSA3116E
3117	Error	Failed to load module '%1'. Error=%2.	[Meaning] Failed to load module. %1: Module name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3117E
3118	Error	Entry point '%1' not found in module '%2'. Error=%3.	[Meaning] Entry point not found. %1: Entry point name %2: Module name %3: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3118E
3119	Error	The module '%1' failed to initialize. Error=%2.	[Meaning] Initialization failed. %1: Module name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3119E
3120	Error	The command '%1' could not be expanded.	[Meaning] Command could not be expanded. %1: Command name [Action] Collect the maintenance information and contact a system engineer.
DSA3120E
3121	Error	The command '%1' expanded to a size greater than the maximum allowable size of %2.	[Meaning] Expanded size of command exceeds its allocated size. %1: Command name %2: Size [Action] Collect the maintenance information and contact a system engineer.
DSA3121E
3123	Error	Command to be executed is empty.	[Meaning] Command to be executed is empty. [Action] Collect the maintenance information and contact a systems engineer.
DSA3123E
3125	Error	Failed to create file '%1'. Command '%2' is not processed. Error=%3.	[Meaning] Command not executed due to failure to create file. %1: File name %2: Command name [Action] Collect the maintenance information and contact a system engineer.
DSA3125E
3126	Error	Failed to open file '%1'. Command '%2' is not processed. Error = %3.	[Meaning] Command not executed due to failure to open file. %1: File name %2: Command name [Action] Collect the maintenance information and contact a systems engineer.
DSA3126E
3127	Error	Failed to read from file '%1'. Error=%2.	[Meaning] Failed to read the file. %1: File name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3127E
3129	Error	Failed to execute command %1. Error=%2	[Meaning] Failed to execute command. %1: Command name %2: Error code [Action] This is not a problem if it does not occur too frequently.
DSA3129E
3130	Error	Failed to obtain the return code for the command '%1'. Error=%2	[Meaning] Failed to obtain the return code for the command. %1: Command name %2: Error code [Action] Collect the maintenance information and contact a system engineer.
DSA3130E
3133	Error	Memory allocation failed for a block size of %1.	[Meaning] Memory allocation failed. %1:Size of block of memory tried to be allocated [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, contact a Fujitsu SE.
DSA3133E
3136	Error	Failed to open bad file. DSA error=%1.	[Meaning] Failed to open the "bad" file. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3136E
3138	Error	TIS interface error=%1.	[Meaning] TIS interface error occurred. %1: Error code [Action] Collect the maintenance information and contact a system engineer.
DSA3138E
3139	Error	TIS errors=%1	[Meaning] TIS error occurred. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3139E
3140	Error	Failed to set TIS tag data.	[Meaning] Failed to set TIS tag data. [Action] Collect the maintenance information and contact a system engineer.
DSA3140E
3141	Error	Parser failed to return any commands.	[Meaning] Parser failed to return any commands. [Action] Collect the maintenance information and contact a systems engineer.
DSA3141E
3142	Error	Parser returned error=%1.	[Meaning] Parser returned an error. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3142E
3147	Error	The number of errors has exceeded the maximum of %1.	[Meaning] Maximum number of errors exceeded. %1: Maximum number [Action] Collect the maintenance information and contact a systems engineer.
DSA3147E
3150	Error	Internal error: Invalid parameter passed to a function.	[Meaning] An internal error occurred. [Action] Collect the maintenance information and contact a systems engineer.
DSA3150E
3151	Error	The parameter '%1' could not be expanded.	[Meaning] Parameter could not be expanded. %1:Paremeter [Action] Collect the maintenance information and contact a systems engineer.
DSA3151E
3200	Error	Failed to open TIS session. %1.	[Meaning] Failed to open TIS session. %1: [Action] Collect the maintenance information and contact a systems engineer.
DSA3200E
3201	Error	Failed to receive an input DSA record.	[Meaning] Failed to receive an input DSA record. [Action] Collect the maintenance information and contact a systems engineer.
DSA3201E
3202	Error	Error processing record with TIS. %1	[Meaning] An error occurred in TIS. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3202E
3203	Error	Failed to output the processed records.	[Meaning] The process of outputting a record to a file has failed. [Action] The following problems may have caused this error, so examine any messages output immediately before this one and take whatever action is appropriate. If there is no free disk space, increase the amount of available space. If an I/O error occurred, investigate the cause of the error. In all other cases, collect the maintenance information and contact a systems engineer.
DSA3203E
3204	Error	Error processing input records.	[Meaning] Error processing input records. [Action] Collect the maintenance information and contact a systems engineer.
DSA3204E
3205	Error	Error getting checkpoint data from TIS. %1.	[Meaning] Failed to acquire checkpoint from TIS. %1: [Action] Collect the maintenance information and contact a system engineer.
DSA3205E
3206	Error	Error getting start checkpoint data.	[Action] Failed to acquire a start checkpoint. [Meaning] Collect the maintenance information and contact a systems engineer.
DSA3206E
3207	Error	Configuration parameter '%1' is invalid.	[Meaning] Configuration parameter is invalid. %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA3207E
3208	Error	Failed to load %1. %2.	[Meaning] Failed to load library. %1: Path name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA3208E
3209	Error	Entry point '%1' was not found in %2.	[Meaning] Entry point not found. %1: Entry point name %2: Library name [Action] Collect the maintenance information and contact a systems engineer.
DSA3209E
3210	Error	Initialization of %1 failed with code %2.	[Meaning] Initialization failed. %1: Library name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA3210E
3600	Information	Free disk space on path %1 is no longer under threshold	[Meaning] Free disk space is now over the threshold. %1: Path name [Action] No action required.
DSA3600I
3650	Warning	Free disk space on path %1 reached warning level of %2 MB	[Meaning] Free disk space has reached the warning level. %1: Path name %2: Size [Action] Reserve enough free disk space.
DSA3650W
3700	Error	DSA record type is not specified.	[Meaning] DSA record type was not specified. [Action] Collect the maintenance information and contact a systems engineer.
DSA3700E
3702	Error	At least one path must be specified for monitoring.	[Meaning] A path was not specified in the disk space monitoring settings. [Action] Refer to "Monitoring Available Disk Space" in the Installation Guide and check the settings.
DSA3702E
3703	Error	Monitoring parameter '%1' must be of the following form:%n <warning limit>,<critical limit>,<path to monitor>	[Meaning] Disk space monitoring settings are invalid. %1: Monitoring parameter [Action] Refer to "Monitoring Available Disk Space" in the Installation Guide and check the settings.
DSA3703E
3704	Error	Free disk space on path %1 reached critical level of %2 MB	[Meaning] Disk space has reached the error level, therefore resident processes have been stopped to protect the system. %1: Path name %2: Size [Action] Reserve enough free disk space, and then restart resident processes.
DSA3704E
3705	Error	Free disk space on path %1 reached critical level of %2 MB	[Meaning] Resident processes will stop in order to protect the system. %1: Pass name %2: Size [Action] Reserve enough free disk space, and then restart resident processes.
DSA3705E
3800	Error	Failed to open TIS session. %1.	[Meaning] Failed to open TIS session. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA3800E
3801	Error	Event type name parameter is not specified in the DSA_EVENT configuration.	[Meaning] Event type was not specified. [Action] Collect the maintenance information and contact a systems engineer.
DSA3801E
3802	Error	Failed to initialize event transfer.	[Meaning] Initialization failed. [Action] Collect the maintenance information and contact a systems engineer.
DSA3802E
3803	Error	Error processing record with TIS. %1.	[Meaning] An error occurred in TIS record processing. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA3803E
3804	Error	Failed to output the processed records.	[Meaning] Failed to output the processed records. [Action] Collect the maintenance information and contact a systems engineer.
DSA3804E
3805	Error	Failed to receive an input event.	[Meaning] Failed to receive an input event. [Action] Collect the maintenance information and contact a systems engineer.
DSA3805E
3806	Error	Error processing input records.	[Meaning] Error processing input records. [Action] Collect the maintenance information and contact a systems engineer.
DSA3806E
4100	Error	ARM initialization failed with code %1.	[Meaning] Failed to initialize ARM. %1: Error code [Action] Collect the maintenance information and contact a system engineer.
DSA4100E
4221	Error	Memory allocation failed for a block size of %1.	[Meaning] Failed to allocate memory block: out of memory. %1: Size [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, collect the maintenance information and contact a systems engineer.
DSA4221E
4450	Error	Failed to open %1: %2.	[Meaning] Failed to open the file. %1: File name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA4450E
4500	Error	Agent '%1' is responding now.	[Meaning] The named agent is responding. %1:Agent name [Action] No action required
DSA4500I
4525	Error	Failed to open the "bad" file. Verify that the configuration parameters 'bad_file_dir' and 'bad_file_name' are specified correctly. "Bad" file logging is disabled.	[Meaning] Failed to open the "bad" file. [Action] Collect the maintenance information and contact a systems engineer.
DSA4525W
4550	Error	The configuration parameter '%1' is incorrect.	[Meaning] Invalid definition parameters. %1:Parameter name [Action] Collect the maintenance information and contact a systems engineer.
DSA4550E
4551	Error	Failed to obtain the configuration parameter '%1'.	[Meaning] Failed to acquire definition parameters. %1: Parameter name [Action] Collect the maintenance information and contact a systems engineer.
DSA4551E
4552	Error	The configuration parameter 'snmp_agent' field 'Agent ID' is incorrect.	[Meaning] Error in Agent ID field of the definition parameters snmp_agent. [Action] Collect the maintenance information and contact a systems engineer.
DSA4552E
4553	Error	The configuration parameter 'snmp_agent' field 'SNMP version' is incorrect.	[Meaning] Error in SNMP version field of the definition parameters snmp_agent. [Action] Collect the maintenance information and contact a systems engineer.
DSA4553E
4554	Error	The configuration parameter 'snmp_agent' field 'agent address' is incorrect.	[Meaning] Error in agent address field of the definition parameters snmp_agent. [Action] Collect the maintenance information and contact a systems engineer.
DSA4554E
4555	Error	The configuration parameter 'snmp_agent field 'agent ID' is too long.	[Meaning] Agent ID field of the definition parameters snmp_agent is too long. [Action] Collect the maintenance information and contact a systems engineer.
DSA4555E
4556	Error	The internal net-snmp configuration file name is too long.	[Meaning] File name of the definition file is too long. [Action] Collect the maintenance information and contact a systems engineer.
DSA4556E
4557	Error	The net-snmp MIB path is too long.	[Meaning] Path name of the MIB is too long. [Action] Collect the maintenance information and contact a systems engineer.
DSA4557E
4558	Error	Cannot create the internal net-snmp configuration file.	[Meaning] Could not create definition file. [Action] Collect the maintenance information and contact a systems engineer.
DSA4558E
4559	Error	At least one parameter '%1' must be defined.	[Meaning] Parameter is not defined. %1: Parameter name [Action] Collect the maintenance information and contact a systems engineer.
DSA4559E
4560	Error	Failed to generate password '%1'. The password is incorrect or too small. %2	[Meaning] Failed to generate password. There is an error in the password, or it is too short. %1: Password %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA4560E
4561	Error	Failed to open a session with the SNMP agent '%1'. %2	[Meaning] Failed to open session with SNMP agent. %1: SNMP agent name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA4561E
4562	Error	Not enough memory.	[Meaning] There is insufficient memory. [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, collect the maintenance information and contact a systems engineer.
DSA4562E
4563	Error	Failed to open a TIS session. %1	[Meaning] Failed to open TIS session. [Action] Collect the maintenance information and contact a systems engineer.
DSA4563E
4564	Error	TIS processing failed. %1 Record: %2	[Meaning] Failed to process TIS. %1: Error message %2: Record [Action] Collect the maintenance information and contact a systems engineer.
DSA4564E
4565	Error	Failed to write output records.	[Meaning] Failed to write output records. [Action] Collect the maintenance information and contact a systems engineer.
DSA4565E
4566	Error	Agent '%1' is not responding.	[Meaning] Agent could not respond. %1: Agent name [Action] Collect the maintenance information and contact a systems engineer.
DSA4566E
4568	Error	Internal error: snmplib cannot parse OID '%1'.	[Meaning] Failed to parse OID. %1: OID name [Action] Collect the maintenance information and contact a systems engineer.
DSA4568E
4569	Error	Internal error: snmplib cannot locate the OID tree in MIBs. Variable '%1' is assumed to be scalar.	[Meaning] Failed to find OID. %1: OID name [Action] Collect the maintenance information and contact a systems engineer.
DSA4569E
4570	Error	TIS does not accept SNMP agent records.	[Meaning] TIS did not accept SNMP agent record. [Action] Collect the maintenance information and contact a systems engineer.
DSA4570E
4571	Error	Variable definition does not exist in local MIB. %1 All variables like '%2' will be ignored.	[Meaning] There were no definitions in the MIB. The definition will be ignored. %1: Error message %2: OID [Action] Collect the maintenance information and contact a systems engineer.
DSA4571E
4750	Error	SQLPLUS_PARSER: function is called with invalid parameters.	[Meaning] Function is called with invalid parameters. [Action] Collect the maintenance information and contact a systems engineer.
DSA4750E
4751	Error	SQLPLUS_PARSER: the configuration parameter '%1' is not specified or is incorrect.	[Meaning] Parameter was not specified, or is incorrect. %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA4751E
4752	Error	SQLPLUS_PARSER: the configuration parameter '%1' is too long.	[Meaning] Parameter is too long. %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA4752E
4753	Error	SQLPLUS_PARSER: failed to decrypt the password.	[Meaning] Failed to decode password for Oracle access. [Action] Collect the maintenance information and contact a systems engineer.
DSA4753E
4754	Error	SQLPLUS PARSER: not enough memory.	[Meaning] There is insufficient memory. [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, contact a systems engineer.
DSA4754E
5300	Error	Failed to allocate memory block: out of memory.	[Meaning] Memory allocation failed. [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, contact a systems engineer.
DSA5300E
5301	Error	Invalid parameter: %1.	[Meaning] Invalid parameter. %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA5301E
5302	Error	%1 parameter was not specified.	[Meaning] Parameter was not specified. %1: Parameter name [Action] Collect the maintenance information and contact a systems engineer.
DSA5302E
5303	Error	Failed to open PDB database: %1.	[Meaning] Failed to open database. %1: Database name [Action] Collect the maintenance information and contact a systems engineer.
DSA5303E
5304	Error	Failed to read the PDB database configuration from the system_database table.	[Meaning] Failed to read database definition. [Action] Collect the maintenance information and contact a systems engineer.
DSA5304E
5305	Error	Failed to create PDB database, SQL file execution failed: %1.	[Meaning] Failed to create database. %1: Database name [Action] Collect the maintenance information and contact a systems engineer.
DSA5305E
5306	Error	Internal error: %1.	[Meaning] An internal error occurred. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA5306E
5307	Error	Table system is invalid in old PDB.	[Meaning] System table is invalid in old PDB. [Action] Collect the maintenance information and contact a systems engineer.
DSA5307E
5309	Error	Failed to execute transaction against the PDB database: %1.	[Meaning] Failed to execute transaction. %1: Database name [Action] Collect the maintenance information and contact a systems engineer.
DSA5309E
5450	Error	Failed to open PDB database '%1': %2.	[Meaning] Failed to open the PDB. %1: Database name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA5450E
5451	Error	Failed to read the PDB database configuration from the system_database table.	[Meaning] Failed to read the PDB database configuration. [Action] Collect the maintenance information and contact a systems engineer.
DSA5451E
5452	Error	Failed to obtain list of database files to delete.	[Meaning] Failed to obtain list of PDB to delete. [Action] Collect the maintenance information and contact a systems engineer.
DSA5452E
5453	Error	Failed to delete old database file '%1': %2.	[Meaning] Failed to delete PDB. %1: Database name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA5453E
5454	Error	Failed to read information about PDB tables from the system_tables table.	[Meaning] Failed to read PDB table information. [Action] Collect the maintenance information and contact a systems engineer.
DSA5454E
5455	Error	Management for table '%1' failed. Wrong data for management type %2. Data: '%3'.	[Meaning] Failed to control the table due to incorrect management type. %1: Table name %2: Management type %3:Data [Action] Collect the maintenance information and contact a systems engineer.
DSA5455E
5456	Error	Management for table '%1' failed. Unknown management type %2.	[Meaning] Failed to control the table due to unknown management type. %1: Table name %2: Management type [Action] Collect the maintenance information and contact a systems engineer.
DSA5456E
5457	Error	Management for table '%1' in database file '%2' failed. Execution of management SQL returned error. Management SQL: '%3'. Error: '%4'. Management type: %5. Management data: '%6'.	[Meaning] Failed to control the table. %1: Table name %2: File name %3: SQL statement %4: Error code %5: Management type %6: Data [Action] Collect the maintenance information and contact a systems engineer.
DSA5457E
5458	Error	Failed to allocate memory block: out of memory.	[Meaning] Failed to allocate the memory block. [Action] If system memory has become exhausted, resolve this memory shortage problem. If not, collect the maintenance information and contact a systems engineer.
DSA5458E
5459	Error	Fatal error: %1	[Meaning] Fatal error has occured. %1 : error message [Action] Collect the maintenance information and contact a system engineer.
DSA5459E
5559	Error	Failed to output DSA record '%1', code: %2.	[Meaning] Failed to output DSA records. %1: Record name %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA5559E
5560	Error	Failed to output DSA records, DsaPutEnd() failed, code: %1.	[Meaning] Failed to output DSA records. %1: Error code [Action] Collect the maintenance information and contact a systems engineer.
DSA5560E
5561	Error	Failed to read timezone information from 'system' table in old database: %1.	[Meaning] Failed to read timezone information from 'system' table. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA5561E
5700	Information	Successfully connected to JMX server '%1'	[Meaning] Connected to the JMX server. %1: JMX server URL in JNDI format [Action] No action is necessary.
DSA5700I
5726	Warning	Failed to connect to JMXserver %1: %2	[Meaning] Failed to connect to the JMX server. %1: JMX server URL in JNDI format %2: Error message [Action] If the JMX server is stopped, start it. Check the value of the following item concerning to Interstage Application Server (Java EE environment) linking or WebLogic Server Linking in the the collection template (template.dat), which was specified in the collection template (template.dat), is correct. USER PASSWORD PORT If it is wrong, correct it, setup, and then restart Systemwalker Service Quality Coordinator DCM service.
DSA5726W
5752	Error	Failed to load configuration file %1: %2	[Meaning] Failed to open configuration file %1: file name %2: Error message [Action] In case of that the string of "%2 (error message)" includes "Failed to decrypt password.", check the value of the following item concerning to Interstage Application Server (Java EE environment) linking or WebLogic Server Linking in the the collection template (template.dat), which was specified in the collection template (template.dat), is correct. PASSWORD If it is wrong, correct it, setup, and then restart Systemwalker Service Quality Coordinator DCM service. In other case, collect the maintenance information and contact a systems engineer.
DSA5752
5753	Error	Failed to connect to JMX server %1: %2	[Meaning] Failed to connect to the JMX server. %1: JMX server URL in JNDI format %2: Error message [Action] Check the value of the following item concerning to Interstage Application Server (Java EE environment) linking or WebLogic Server Linking in the the collection template (template.dat), which was specified in the collection template (template.dat), is correct. USER PASSWORD PORT If it is wrong, correct it, setup, and then restart Systemwalker Service Quality Coordinator DCM service. In other case, collect the performance information and contact a system engineer.
DSA5753E
5800	Information	PDB database is created successfully	[Meaning] PDB database is created successfully. [Action] No need to take a further action.
DSA5800I
5826	Error	Failed to access PDB database, will retry each %1 seconds: %2	[Meaning] Error has occured when accessing PDB. %1 : Retry interval (second) %2 : Error message [Action] If the internal retry succeeds, no further action is needed. If the internal retry fails and the message output continues, collect the maintenance information and contact a system engineer.
DSA5826E
5827	Error	Failed to execute transaction against the PDB database. Now trying to re-open the database. Error : %1	[Meaning] Failed to execute transaction against the PDB database. %1 : Error message [Action] This error message is normally output when the error occured when the record is written in PDB. If the error message is "database is locked", this error may output when the collection data write competes with contents display read, this will not be a problem if this error does not happen frequently. In other case, collect the performance information and contact a system engineer.
DSA5827E
5850	Error	Failed to open SQL file '%1': %2.	[Meaning] Failed to open SQL file. %1: File name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA5850E
5851	Error	Failed to read SQL file '%1': %2.	[Meaning] Failed to read SQL file. %1: File name %2: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA5851E
5852	Error	Failed to allocate memory block: out of memory.	[Meaning] Failed to allocate the memory block. [Action] If system memory has become exhausted, resolve this memory shortage problem. If not, collect the maintenance information and contact a systems engineer.
DSA5852E
5853	Error	Failed to access/create PDB database directory '%1': %2	[Meaning] Failed to access or create PDB database directory. %1 : Directory name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA5853E
5854	Error	Failed to open PDB database: %1	[Meaning] Failed to open PDB database. %1 : Database name [Action] Collect the maintenance information and contact a system engineer.
DSA5854E
5855	Error	Fatal error: %1	[Meaning] Fatal error has occured. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA5855E
5856	Error	Database exception: %1	[Meaning] Database exception has occured. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA5856E
5857	Error	An unsupported database type is specified in the database_type parameter.	[Meaning] An invalid datebase_type parameter was specified. [Action] Collect the maintenance information and contact a systems engineer.
DSA5857E
5858	Error	Exceeded wait timeout for the PDB databaser to be created. %1	[Meaning] PDB creation timed out. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA5858E
5859	Error	Failed to read the PDB database configuration from the system_database table	[Meaning] Failed to read the PDB database configuration. [Action] Collect the maintenance information and contact a system engineer.
DSA5859E
5860	Error	Failed to read the PDB database tables information from the system_tables table	[Meaning] Failed to read the PDB database tables information. [Action] Collect the maintenance information and contact a system engineer.
DSA5860E
5861	Error	Error processing an input DSA record	[Meaning] Error processing an input DSA record. [Action] Collect the maintenance information and contact a system engineer.
DSA5861E
5862	Error	Failed to receive an input DSA record	[Meaning] Failed to receive an input DSA record. [Action] Collect the maintenance information and contact a system engineer.
DSA5862E
5863	Error	Failed to execute transaction against the PDB database: %1	[Meaning] Failed to execute transaction. %1 : Database name [Action] Collect the maintenance information and contact a system engineer.
DSA5863E
5864	Error	Failed to detach database '%1': %2	[Meaning] Failed to detach PDB database. %1 : Database file name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA5864E
5865	Error	Failed to execute system register SQL against the PDB database: %1	[Meaning] Failed to execute system register SQL against the PDB database. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA5865E
5866	Error	Failed to attach database '%1': %2	[Meaning] Failed to attach PDB database file. %1 : Database file name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA5866E
5867	Error	System function '%1' failed: %2	[Meaning] System function failed. %1 : Function name %2 : Error code [Action] Collect the maintenance information and contact a system engineer.
DSA5867E
6025	Error	Unable to change directory to %1	[Meaning] Unable to change directory. %1 : Directory name [Action] Collect the maintenance information and contact a system engineer.
DSA6025E
6050	Error	Cannot start msgmanage. %1 system call failed with the following error: %2	[Meaning] Cannot start msgmanage. %1 : System call name %2 : Error Message [Action] Collect the maintenance information and contact a system engineer.
DSA6050E
6051	Error	Cannot write pid file (%1). Check file permissions.	[Meaning] Cannot write pid file. %1 : pid file name [Action] Check the permissions of the directory which the file is stored, and add the permission to access. If the problem is not solved by the above action, then collect the maintenance information and contact a system engineer.
DSA6051E
6052	Error	Errors in command line arguments. Stopping.	[Meaning] Errors in command line arguments. [Action] Collect the maintenance information and contact a system engineer.
DSA6052E
6053	Error	Filed to load configuration file '%1': %2	[Meaning] Failed to load configuration file. %1 : Configuration file name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA6053E
6054	Error	'%1' variable is not defined.	[Meaning] Required parameter is not defined. %1 : Definition name [Action] Collect the maintenance information and contact a system engineer.
DSA6054E
6055	Error	Failed to open TIS session. %1	[Meaning] Failed to open TIS session. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA6055E
6056	Error	Error processing record with TIS. %1	[Meaning] Error processing record with TIS. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA6056E
6101	Error	Monitoring value of Object(%3) is above than upper error level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is greater than the upper error level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
		Monitoring value of Object(%3) is below than lower error level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is lower than the lower error level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
6102	Warning	Monitoring value of Object(%3) is above than upper warning level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is greater than the upper warning level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
		Monitoring value of Object(%3) is below than lower warning level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is lower than the lower warning level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
6103	Information	Monitoring value of Object(%3) is below than upper error level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is lower than the upper error level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
		Monitoring value of Object(%3) is above than lower error level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is greater than the lower error level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
		Monitoring value of Object(%3) is below than upper warning level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is lower than the upper warning level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
		Monitoring value of Object(%3) is above than lower warning level. (Device Name:%2, Detect Value:%5, Threshold Value:%6, Detect Times:%7, Detect Check Times:%8)	[Meaning] Monitoring value of Object is greater than the lower warning level. Host name: Resource ID is displayed in %2. [Action] This message is the alert of threshold monitor.
6302	Error	Syntax error is found inside definition file.(file='%1', line=%2)	[Meaning] Syntax error is found inside the definition file. %1: File name %2: Line number [Action] Check the definition file at the indicated line and correct any errors. If this message is output when the collection policy is created, recreate the collection policy. If the same message is output after action has been taken, collect the maintenance information and contact a systems engineer.
6303	Warning	subsystem %1 is inactive.	[Meaning] Subsystem is inactive. %1: Subsystem name [Action] Processing continues. Check whether data needs to be collected for inactive subsystem %1. If data needs to be collected, no action is required. Otherwise, delete the specification for subsystem %1 from the "jla.ini" settings file.
6304	Warning	Systemwalker Operation Manager's log can not be recognized. So it is ignored.(log='%1')	[Meaning] Systemwalker Operation Manager's log cannot be recognized, therefore it is ignored. %1: Log file name [Action] Processing continues. If the message is output frequently, collect the maintenance information and contact a systems engineer.
6305	Warning	File operation failed so JLA stopped.(detail='%1', errno=%2)	[Meaning] File operation failed so JLA stopped. %1: Details %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
6306	Warning	Language code conversion failed so JLA stopped.(detail='%1', errno=%2)	[Meaning] Language code conversion failed, therefore JLA stopped. %1: Details %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
6307	Warning	An error occurred so JLA stopped.(detail='%1', errno=%2)	[Meaning] An error occurred, therefore JLA stopped. %1: Details %2: Error code [Action] Collect the maintenance information and contact a systems engineer.
6350	Error	[service%1] Transaction Log watcher engine stopped, because an error occurred.%2	[Meaning] An error occurred, therefore the transaction Log watcher engine stopped. %1: Service name %2: Error message [Action] Check for any errors in the environment settings or definition files for the transaction log monitoring engine. If there are no errors, collect all of the files in the "log" directory under the (variable) installation directory, and contact a systems engineer.
6351	Error	Can not read the transaction log watcher definition file. (line=%1, code=%2)	[Meaning] The transaction log watcher definition file could not be read. %1: Line number %2: Error code [Action] Check whether line %1 of the transaction log definition file contains any of the following errors that appear in the code indicated by %2. (The meaning of each code is as below.) 102: Failed to read a string from a file stream. 200: A block name is incorrect. 201: An invalid block name has been specified. 300: An invalid value has been specified. 301: There is an error with a wildcard specification. 302: An invalid character has been specified. 303: The definition contains too many characters. 307: No value has been specified. 310: There is an error with the specification format. 311: The maximum number of definitions that can be made has been exceeded. 312: The value has been specified more than once. 400: The parameter name has not been specified correctly. 401: An invalid parameter has been specified. 402: A required definition statement has not been specified. 500: The symbol name is not correct. 501: A required token has not been specified. 502: The definition statement has not been specified. 900: Failed to allocate memory. If there are no errors, collect the maintenance information and contact a systems engineer.
6352	Error	[service%1] Can not read a log file, '%2'.%3	[Meaning] A transaction log file could not be read. %1: Service name %2: Log file name %3: Error message [Action] Check for any errors in the settings for the log file specified in the transaction log definition file. If there are no errors, collect the maintenance information and contact a systems engineer.
6353	Error	[service%1] Invalid log form detected in a log file '%2', continuously.%3	[Meaning] Invalid log form detected in transaction log file continuously. %1:Service name %2: Log file name %3: Error message [Action] Check for any errors in the settings for the log format specified in the transaction log definition file. If there are no errors, collect the maintenance information and the following data, and contact a systems engineer.
7053	Error	Record processing failed. %1	[Meaning] Error processing records. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA7053E
7200	Information	SAF database is created successfully	[Meaning] SAF database is created successfully. [Action] No need to take a further action.
DSA7200I
7226	Error	Failed to access SAF database, will retry each %1 seconds: %2	[Action] Failed to access SAF database. %1 : Retry interval (second) %2 : Error message [Action] If the internal retry succeeds, no further action is needed. If the internal retry fails and the message output continues, collect the maintenance information and contact a system engineer.
DSA7226E
7227	Error	Failed to execute transaction against the SAF database. Now trying to re-open the database. Error: %1	[Meaning] Failed to execute transaction against the SAF database. %1 : Error Message [Action] If the internal re-open succeeds, no further action is needed. If the internal re-open fails and the message output continues, collect the maintenance information and contact a system engineer.
DSA7227E
7228	Error	Failed to obtain forward records from SAF database. Now trying to re-open the database. Error: %1	[Meaning] Failed to obtain forward records from SAF database. %1 : Error Message [Action] If the internal re-open succeeds, no further action is needed. If the internal re-open fails and the message output continues, collect the maintenance information and contact a system engineer.
DSA7228E
7250	Error	Failed to open SQL file '%1': %2	[Meaning] Failed to open SQL file. %1 : File name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA7250E
7251	Error	Failed to read SQL file '%1': %2	[Meaning] Failed to read SQL file. %1 : File name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA7251E
7252	Error	An unsupported database type is specified in the database_type parameter.	[Meaning] Error in the specified database_type parameter. [Action] Collect the maintenance information and contact a system engineer.
DSA7252E
7253	Error	Failed to access/create SAF database directory '%1': %2	[Meaning] Failed to access or create SAF database directory. %1 : Directory name %2 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA7253E
7254	Error	Error processing an input DSA record	[Meaning] Error processing an input DSA record. [Action] Collect the maintenance information and contact a system engineer.
DSA7254E
7255	Error	Failed to receive an input DSA record	[Meaning] Failed to receive an input DSA recored. [Action] Collect the maintenance information and contact a system engineer.
DSA7255E
7256	Error	Failed to allocate memory block: out of memory	[Meaning] Failed to allocate the memory block. [Action] If system memory has become exhausted, resolve this memory shortage problem. If not, collect the maintenance information and contact a systems engineer.
DSA7256E
7257	Error	Database exception: %1	[Meaning] Database exception has occured. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA7257E
7258	Error	Fatal error: %1	[Meaning] Fatal error has occured. %1 : error message [Action] Collect the maintenance information and contact a system engineer.
DSA7258E
7259	Error	Failed to execute transaction against the SAF database: %1	[Meaning] Failed to execute transaction against the SAF database. %1 : Error Message [Action] Collect the maintenance information and contact a system engineer.
DSA7259E
7260	Error	Failed to load module config file '%1': %2 %3	[Meaning] Failed to load module config file. %1 : File name %2 : Error code %3 : Error Message [Action] Collect the maintenance information and contact a system engineer.
DSA7260E
7261	Error	Failed to open TIS session. %1	[Meaning] Failed to open TIS session. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA7261E
7262	Error	Failed to obtain forward records from SAF database: %1	[Meaning] Failed to obtain forward records from SAF database. %1 : Error message [Action] Collect the maintenance information and contact a system engineer.
DSA7262E
7263	Error	DSA library function %1 failed. %2	[Meaning] Transaction failed. %1 : Transaction name %2 : Error code [Action] Collect the maintenance information and contact a system engineer.
DSA7263E
8025		Failed to open the 'bad' file. Verify that the configuration parameters 'bad_file_dir' and 'bad_file_name' are specified correctly. 'Bad' file logging is disabled.	[Meaning] Failed to open the "bad" file. [Action] Collect the maintenance information and contact a systems engineer.
DSA8025W
8026	Warning	Failed to obtain server address info for server=%1. SERVER IS IGNORED %2	[Meaning] Failed to acquire an address for the server. %1: Server name %2: Error message [Action] Correct any errors in the host name for the remote server in the connection account configuration file. If there is no error in the host name, specify the host name of the remote server with its IP address. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8026W
8027	Warning	Unable to connect to the server %1. %2. %3	[Meaning] An attempt to connect to the server has failed. %1: Server name %2: System call %3: Error message [Action] Correct any errors in the information for the remote server in the definitions file for the connection account or in the remote monitoring configuration file. Perform setup when the errors are corrected. If the remote server or service set in the definitions file is stopped, start them. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8027W
8028	Warning	Unable to transmit data to the server %1. %2	[Meaning] Data could not be sent to the server. %1: Server name %2: Error message [Action] If the remote server or service set in the definitions file for the connection account is stopped, start them. In all other cases, collect the maintenance information and contact a systems engineer.
DSA8028W
8029	Warning	Unable to receive data to the server %1. %2	[Meaning] Data could not be received from the server. %1: Server name %2: Error message [Action] If the remote server or service set in the definitions file for the connection account is stopped, start them. In all other cases, collect the maintenance information and contact a systems engineer.
DSA8029W
8030	Warning	server %1 disconnects.	[Meaning] Connection with the server was cut. %1: Server name [Action] If the remote server or service set in the definitions file for the connection account is stopped, start them. Check that the monitored server for agent for Agentless Monitoring management is correctly set. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8030W
8031	Warning	Failed to open file %s.	[Meaning] Could not open file. %s: File name [Action] If the file is open in a text editor or other application, close it. In all other cases, collect the maintenance information and contact a systems engineer.
DSA8031W
8032	Warning	Connect error or timeout for server=%1	[Meaning] A server connection error or timeout has occurred. %1: Server name [Action] Correct any errors in the information for the remote server in the definitions file for the connection account or in the remote monitoring configuration file. Perform setup when the errors are corrected. If the remote server or service set in the definitions file is stopped, start them. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8032W
8033	Warning	%1 SOCKET error: %2	[Meaning] Socket error. %1: System call %2: Error message [Action] Correct any errors in the information for the remote server in the definitions file for the connection account or in the remote monitoring configuration file. Perform setup when the errors are corrected. If the remote server or service set in the definitions file is stopped, start them. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8033W
8050	Error	command_file parameter is not specified or no commands are specified in the file.	[Meaning] An invalid command_file parameter was specified. [Action] Collect the maintenance information and contact a systems engineer.
DSA8050E
8051	Error	Error reading from %1.	[Meaning] Read error %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA8051E
8052	Error	No server parameter(s).	[Meaning] Server parameter was not specified. [Action] Collect the maintenance information and contact a systems engineer.
DSA8052E
8053	Error	port is not specified in the parameter server=%1 or port is invalid.	[Meaning] An invalid port parameter was specified. %1: Server name [Action] Collect the maintenance information and contact a systems engineer.
DSA8053E
8054	Error	login is not specified in the parameter server=%1.	[Meaning] An invalid login parameter was specified. %1: Server name [Action] Collect the maintenance information and contact a systems engineer.
DSA8054E
8055	Error	password is not specified in the parameter server=%1 or password is invalid.	[Meaning] An invalid password parameter was specified. %1: Server name [Action] The login password for the remote server may not be set correctly in the remote monitoring configuration file, check it and make any necessary corrections. In all other cases, collect the maintenance information and contact a systems engineer.
DSA8055E
8056	Error	Invalid address parameter server=%1.	[Meaning] An invalid password parameter was specified. %1: Server name [Action] Collect the maintenance information and contact a systems engineer.
DSA8056E
8057	Error	Not enough memory.	[Meaning] There is insufficient memory. [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, collect the maintenance information and contact a systems engineer.
DSA8057E
8058	Error	Failed to open a TIS session. %1	[Meaning] Failed to open TIS session. %1: Error message [Action] Collect the maintenance information and contact a systems engineer.
DSA8058E
8060	Error	The configuration parameter '%1' is incorrect.	[Meaning] Configuration parameter is invalid. %1: Parameter [Action] Collect the maintenance information and contact a systems engineer.
DSA8060E
8061	Error	%1 SOCKET error: %2	[Meaning] Socket error. %1: System call %2: Error message [Action] Correct any errors in the information for the remote server in the definitions file for the connection account or in the remote monitoring configuration file. Perform setup when the errors are corrected. If the remote server or service set in the definitions file is stopped, start them. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8061E
8062	Error	Invalid protocol parameter server=%1.	[Meaning] An invalid protocol parameter was specified. %1: Server name [Action] Collect the maintenance information and contact a systems engineer.
DSA8062E
8063	Error	Invalid ID parameter server=%1.	[Meaning] An invalid ID parameter was specified. %1: Server name [Action] Collect the maintenance information and contact a systems engineer.
DSA8063E
8064	Error	Invalid file name: '%1'.	[Meaning] An invalid file name was specified. %1: File name [Action] Collect the maintenance information and contact a systems engineer.
DSA8064E
8065	Error	TIS processing failed. %1 Record: %2	[Meaning] Failed to process TIS. %1: Error code %2: Record [Action] Collect the maintenance information and contact a systems engineer.
DSA8065E
8066	Error	Failed to write output records.	[Meaning] Failed to write output records. [Action] Collect the maintenance information and contact a systems engineer.
DSA8066E
8092	Error	Connect error or timeout for server=%1	[Meaning] A connection error or timeout has occurred with the server. %1: Server name [Action] Correct any errors in the information for the remote server in the definitions file for the connection account or in the remote monitoring configuration file. Perform setup when the errors are corrected. If the remote server or service set in the definitions file is stopped, start them. If the problem is not solved by the above action, collect the maintenance information and contact a systems engineer.
DSA8092E
8150	Error	%1 parameter is not specified or is invalid.	[Meaning] Parameter is not specified or the parameter is invalid. %1 : Parameter name [Action] Collect the maintenance information and contact a system engineer.
DSA8150E
8151	Error	SOAP error: %1 Deatail: %2	[Meaning] This is a SOAP error. %1: Error message %2: Detailed message (output only if there is a detailed message) [Action] Possible causes: 1. There is an error in the user name or password used to connect to the server. 2. There is an error in the host name or IP address of the connection target server. 3. The user connecting to the server does not have read permission. 4. The network cannot connect to the server, or the server is stopped. If Cause 1 or 2 applies, modify the connection account definition file or the remote monitoring definition file, and perform setup again. If Cause 3 applies, at the connection target server, assign read permission for the user. If Cause 4 applies, correct the network connection to the server, or start the connection target server. If the above actions do not resolve the problem, collect the maintenance information and contact a system engineer.
DSA8151E
8152	Error	The record %1 was not found in the TIS record definitions.	[Meaning] Cannot find the record in the TIS record definitions. [Action] Collect the maintenance information and contact a system engineer.
DSA8152E
8153	Error	A required TIS property is missing. Property name: %1 TIS record/field name: %2	[Meaning] A required TIS property is missing. %1 : Property name %2 : Record name/Field name [Action] Collect the maintenance information and contact a system engineer.
DSA8153E
8154	Error	No counter fields are defined for the record %1.	[Meaning] No counter fields are defined for the record. %1: Record name [Action] Collect the maintenance information and contact a system engineer.
DSA8154E
8155	Error	Invalid property '%1' value '%2' in record/field '%3'.	[Meaning] Invalid property value in record/field. %1 : Property name %2 : Property value %3 : Record name/Field name [Action] Collect the maintenance information and contact a system engineer.
DSA8155E
8157	Error	Not enough memory.	[Meaning] Memory shortage occurred. [Action] If system memory has become exhausted, resolve this memory shortage problem. In all other cases, collect the maintenance information and contact a systems engineer.
DSA8157E
8158	Error	Failed to open a TIS session. %1	[Meaning] Failed to open a TIS session. %1 : Error Message [Action] Collect the maintenance information and contact a system engineer.
DSA8158E
8160	Error	The configuration parameter '%1' is incorrect.	[Meaning] The configuration parameter is incorrect. %1 : Parameter name [Action] Collect the maintenance information and contact a system engineer.
DSA8160E
8165	Error	TIS processing failed. %1 Record: %2	[Meaning] TIS processing failed. %1 : Error Message %2 : Record [Action] Collect the maintenance information and contact a system engineer.
DSA8165E
8166	Error	Failed to write output records.	[Meaning][ Failed to write output records. [Action] Collect the maintenance information and contact a system engineer.
DSA8166E