Failure event | Level | Event display | Remarks |
|---|---|---|---|
Port failure | Error | FC Port No.%NUMBER% FAULT | Note 1, 2 and 3 |
Port Online | Information | FC Port No.%NUMBER% Online | |
Port Offline | Information | FC Port No.%NUMBER% Offline | |
Event traps | Error, | The message notified from the device is output as is. |
As for the Te port and FC port number, the Index value output by "show fabric islports" command of Brocade VDX series is displayed.
In the case of the FCoE connection port, a displayed port number is the total value of followings.
Last index value of the Te port displayed by "show fabric islports" command
Port number of FCOE IF output by "show fcoe interface brief" command
Example
When last index value of the Te port is 60 and port number of FCOE IF is 5, a displayed port number is 65.
FCOE IF is displayed with the following format.
Displayed format | Explanation |
|---|---|
XX/YY/ZZ | The explanation of XX, YY, and ZZ is as follows:
|
The Te port is also displayed as "FC Port".
For the Ge port, the following events of "Table 2.1 Trap common to devices" are displayed.
In the case of Port Offline: Link Down Trap
In the case of Port Online: Link Up Trap
The port number is not displayed. Therefore, log in the target device and check the status of all Ge ports.
