ETERNUS SF Express V15.1/ Storage Cruiser V15.1/ AdvancedCopy Manager V15.1 Web Console Guide

4.14.3 Change the FC port settings

The procedure to change FC ports settings is as follows:

1. On the global navigation tab, click [Storage].
   The registered ETERNUS Disk storage systems are displayed on the Main pane.

2. On the Main pane, click the target ETERNUS Disk storage system.

3. On the Category pane, click [Connectivity].
   The port type list is displayed on the Main pane.

4. On the Main pane, click the digit of Number of Ports field for FC port.
   The FC port list is displayed on the Main pane.

5. On the Main pane, check the target port checkbox.

6. When changing a FC port, click [Modify FC Port] under the [Port] on the Action pane. When changing FC port mode, click [Modify FC Port Mode] under the [Port] on the Action pane.
   The information input screen is displayed.

7. Enter the necessary information, and click the [Modify] button on the lower right.

Note

• The deletion and preservation information when the FC port mode is changed are as follows:

  Port mode before it changes	Port mode after change
  	CA	RA	CA/RA
  CA	-	Host Affinity/LUN Mapping information is deleted	Host Affinity/LUN Mapping information is preserved
  RA	REC path information is deleted	-	REC path information is preserved
  CA/RA	Host Affinity/LUN Mapping information is preserved REC path information is deleted	Host Affinity/LUN Mapping information is deleted REC path information is preserved	-

• When the FC port mode is changed, FC port setting returns to initial value.