Systemwalker Runbook Automation Reference Guide

6.6 LogicalNetwork

When specifying an element in the Element Name cell using an XPath expression, assign "rc" as the namespace prefix.

• Example: /%LogicalNetwork[./#expected/rc:LogicalNetwork/@id = '...']

Element Name	Parent Element	Element Description	Component Name	Component Type	Component Description	Data Type	# of
LogicalNetwork		Network node	id	Attribute	Unique identifier	ID	1
			name	Attribute	Name	string	0..1
			nickname	Attribute	Nickname	string	0..1
			ipAddress	Attribute	Registered IP address	string	0..1
			netmask	Attribute	Net mask	string	0..1
			lastUpdate	Attribute	The date when data was last updated	dateTime	0..1
			updateInfo	Attribute	Update information	string	0..1
			Management	Element	Management information	-	0..1
			Status	Element	Status information	-	0..1
			LogicalNetworkConfiguration	Element	Settings information	-	0..1
			Software	Element	Software information	-	0..1
			Identity	Element	Identification information	-	0..1
Management	NetworkNode	Network node management information	VirtualTerminal	Element	Information required when network nodes are managed using VirtualTerminal	-	0..1
			SNMP	Element	Information required when network nodes are managed using SNMP	-	0..1
VirtualTerminal	Management	Management information for VirtualTerminal	type	Attribute	Control protocol for virtual terminals Either of the following: "Telnet" "SSH"	string	0..1
			version	Attribute	String indicating the version of SSH being used Either of the following: "v1" "v2" * In principle, if both v1 and v2 can be used, use the higher version (v2)	string	0..1
			manageIPAddress	Attribute	The IP address for logging in via Telnet Not required if the same as the management IP address for the device	string	0..1
			loginUsername	Attribute	User name for logging in via Telnet	string	0..1
			loginPassword	Attribute	Password (encrypted) for logging in via Telnet	string	0..1
			adminPassword	Attribute	Password (encrypted) for moving to privileged mode via Telnet Not required if privileged mode is not needed	string	0..1
SNMP (Management)	Management	Management information for SNMP	version	Attribute	String indicating the version of SNMP being used Either of the following: "v1" "v2c" "v3" * In principle, if both v1 and v2 can be used, use the higher version (v2)	string	0..1
			manageIPAddress	Attribute	IP address specified when getting and setting information using SNMP Not required if the same as the management IP address for the device	string	0..1
			readCommunity	Attribute	Community name (encrypted) used with SNMP-GET and GETNEXT	string	1
			writeCommunity	Attribute	Community name (encrypted) used with SNMP-SET	string	0..1
Status (NetworkNode)	NetworkNode	Network node statuses	Interfaces	Element	Information about the status of interfaces	-	0..1
			DynamicRoutings	Element	Information about the status of routings	-	0..1
			SpanningTrees	Element	Information about the status of spanning trees	-	0..1
			LinkAggregations	Element	Information about the status of link aggregations	-	0..1
			Redundancies	Element	Redundancy statuses	-	0..1
Interfaces (Status)	Status	Interface statuses	Interface	Element	Interface status	-	0..*
Interface (Status)		Interface status	id	Attribute	Unique identifier	ID	1
			status	Attribute	String indicating the communications status of the interface One of the following: "unknown" # status unknown "other" # status other than the following "up" # Interface up "down" # Interface down "blocked" # Interface blocked	string	0..1
			mode	Attribute	String indicating the communication protocol One of the following: "unknown" # status unknown "other" # A protocol other than the following "simplex-in # Uni-directional (receiving) "simplex-out" # Uni-directional (sending) "halfDuplex # Half duplex "fullDuplex" # Full duplex	string	0..1
			speed	Attribute	String indicating the actual communications speed <Format> "Number+Scale" Eg "10Gbps" "100Mbps" "unknown" * For link aggregation or ether channels, use the communication speed for each individual interface, rather than the bundled communication speed. Also, for full duplex interfaces, do not double the speed.	string	0..1
DynamicRoutings (Status)	Status	Dynamic routing statuses	RoutingTable	Element	Routing table information	-	0..1
RoutingTable	DynamicRoutings	Routing table	RoutingInfo	Element	Routing information	-	0..*
RoutingInfo	RoutingTable	Routing information	id	Attribute	Unique identifier	ID	1
			protocol	Attribute	Routing protocol One of the following. (Taken from RFC1213, refer to this document for more information) "other" "local" "netmgmt" "icmp" "egp" "ggp" ...	string	0..1
			type	Attribute	Route type One of the following: "other" # A route type not listed here "invalid" # Invalid route "direct" # Adjacent network "indirect" # Non-adjacent network	string	0..1
			destinationAddress	Attribute	Network address	string	0..1
			gatewayAddress	Attribute	Gateway address	string	0..1
			subnetmask	Attribute	Subnet mask value	int	0..1
			nexthop	Attribute	IP address for the next hop	string	0..1
			age	Attribute	Generation value for the routing information	int	0..1
			metric1	Attribute	Metric value 1 for this route This metric value depends on the protocol type, and may not exist The same applies to the following metric values	int	0..1
			metric2	Attribute	Metric value 2 for this route	int	0..1
			metric3	Attribute	Metric value 3 for this route	int	0..1
			metric4	Attribute	Metric value 4 for this route	int	0..1
			metric5	Attribute	Metric value 5 for this route	int	0..1
SpanningTrees (Status)	Status	Spanning tree statuses	STP	Element	STP status	-	0..1
STP (Status)	SpanningTrees	STP status	STPInterface	Element	STP interface status	-	0..*
STPInterface (Status)	STP	STP interface status	id	Attribute	Unique identifier	ID	1
			status	Attribute	STP status for the interface. (Refer to RFC1493 for more information) One of the following values: "unknown" "disabled" "blocking" "listening" "learning" "forwarding" "broken"	string	0..1
LinkAggregations (Status)	Status	Link aggregation statuses	LinkAggregation	Element	Link aggregation status	-	0..*
LinkAggregation (Status)	LinkAggregations	Link aggregation status	id	Attribute	Unique identifier	ID	1
			masterInterface	Attribute	Reference to the Interface(Configuration) element that is the master for this link aggregation	IDREF	0..1
Redundancies (Status)	Status	Redundancy statuses	HotStandby	Element	Hot standby status	-	0..*
HotStandby (Status)	Redundancies	Hot standby status	id	Attribute	Unique identifier	ID	1
			masterIPAddress	Attribute	IP address of the node that is running as the master within this group	string	0..1
Configuration (NetworkNode) (Deprecated)	NetworkNode	Settings information for network nodes	Interfaces	Element	Settings information for logical interfaces	-	0..1
			LinkAggregations	Element	Settings information for link aggregations	-	0..1
			LoadBalancings	Element	Settings information for load balancers	-	0..1
			VLANs	Element	Settings information for VLANs	-	0..1
			SpanningTrees	Element	Settings information for spanning trees	-	0..1
			Redundancies	Element	Settings information for redundancies	-	0..1
			StaticRoutings	Element	Settings information for static routings	-	0..1
			DynamicRoutings	Element	Settings information for dynamic routings	-	0..1
			AddressTranslations	Element	Settings information for address translations	-	0..1
			ACL	Element	Settings information for access controls	-	0..1
LogicalNetworkConfiguration	LogicalNetwork	Settings information for network nodes	Interfaces	Element	Settings information for logical interfaces	-	0..1
			LinkAggregations	Element	Settings information for link aggregations	-	0..1
			LoadBalancings	Element	Settings information for load balancers	-	0..1
			VLANs	Element	Settings information for VLANs	-	0..1
			SpanningTrees	Element	Settings information for spanning trees	-	0..1
			Redundancies	Element	Settings information for redundancies	-	0..1
			StaticRoutings	Element	Settings information for static routings	-	0..1
			DynamicRoutings	Element	Settings information for dynamic routings	-	0..1
			AddressTranslations	Element	Settings information for address translations	-	0..1
			ACL	Element	Settings information for access controls	-	0..1
Interfaces (Configuration)	Configuration	Settings information for logical interfaces	Interface	Element	Settings information for logical interfaces	-	0..*
Interface (Configuration)	Interfaces	Logical interface settings information	id	Attribute	Unique identifier	ID	1
			descr	Attribute	Interface identifier MIB value for 'ifDescr'	string	0..1
			type	Attribute	String indicating the type of interface Basically the value of 'ifType' for MIB-2 for SNMP except that this string can also be "unknown" These values taken from RFC1573. Refer to this document for more information. "unknown" "other " "regular1822" "hdh1822" "ddnX25" "rfc877x25" "ethernetCsmacd" "iso88023Csmacd" "iso88024TokenBus" ...	string	0..1
			statusconfiguration	Attribute	Communication configuration status for the interface (as distinct from the operational status) One of the following "unknown" # status unknown "other" # status other than the following "up" # Interface up "down" # Interface down "blocked" # Interface blocked	string	0..1
			connector	Attribute	Reference to the physical connector	IDREFS	0..1
			mode	Attribute	Communication protocol setting One of the following: "unknown" # Unknown "other" # A protocol other than the following "Auto" # Automatic "simplex-in" # Uni-directional (receiving) "simplex-out" # Uni-directional (sending) "halfDuplex" # Half duplex "fullDuplex" # Full duplex	string	0..1
			speed	Attribute	Communication speed setting <Format> "Number+Scale" use "unknown" if the scale is unknown and "auto" if the speed is automatic Eg "10Gbps" "100Mbps" "auto" * For link aggregation or ether channels, use the communication speed for each individual interface, rather than the bundled communication speed. Also, for full duplex interfaces, do not double the speed.	string	0..1
			status	Attribute	Reference to Interface(Status)	IDREF	0..1
			NetworkAddress	Element	Network address	-	0..*
NetworkAddress	Interface (Configuration)	Network address	ipAddress	Attribute	IP address	string	1
			subnetmask	Attribute	Subnet mask	string	1
LinkAggregations (Configuration)	Configuration	Link aggregation information	LinkAggregation	Element	Link aggregation information	-	0..*
LinkAggregation (Configuration)	LinkAggregations	Link aggregation information	id	Attribute	Unique identifier	ID	1
			aggregatedInterface	Attribute	Reference to the Interface(Configuration) that is being aggregated	IDREFS	0..1
			status	Attribute	Reference to the LinkAggregation(Status)	IDREF	0..1
LoadBalancings	Configuration	Settings information for load balancers	SLBPolicy	Element	SLB settings information	-	0..*
SLBPolicy	LoadBalancings	Policy information for SLB allocation	id	Attribute	Unique identifier	ID	1
			name	Attribute	Formal name	string	0..1
			virtualIPAddress	Attribute	Virtual IP address	string	0..1
			SLBService (SLBPolicy)	Element	Allocated service	-	0..1
SLBNodePolicy	SLBContent	Policy information for SLB allocations for each node	id	Attribute	Unique identifier	ID	1
			ipAddress	Attribute	IP address of the interface on the allocated node	string	0..1
			port	Attribute	Specify the port number for the allocation target. Not required in the default case where it is the same as the virtual port	int	0..1
			protocol	Attribute	String indicating the protocol for the allocation target Not required in the default case "tcp" "udp" "any" (default case: either tcp or udp)	string	0..1
			weight	Attribute	Weighting for the allocated node Valid if the allocation protocol is "static weighted" (default = 1)	int	0..1
SLBService (SLBPolicy)	SLBPolicy	Allocated service	id	Attribute	Unique identifier	ID	1
			name	Attribute	Service name Eg, "http" "ftp" "dns"	string	0..1
			virtualPort	Attribute	Used to specify the port number for the service when a user-defined local service is defined.	int	0..1
			protocol	Attribute	String indicating the protocol for the allocation target Not required in the default case "tcp" "udp" "any" (default case: either tcp or udp)	string	0..1
			type	Attribute	String indicating the service type One of the following: "TCPElse" # A TCP service not listed below "UDPElse" # A UDP service not listed below "Web" # Web server "FTP" # FTP server "Mail(POP3/IMAP)" # Mail server "Mail(SMTP)" # Mail server "DNS" # DNS server "LDAP" # LDAP server	string	0..1
			SLBContent	Element	Allocated content	-	0..*
SLBContent	SLBService	Allocated content	id	Attribute	Unique identifier	ID	1
			url	Attribute	URL	string	0..*
			dispersionType	Attribute	String indicating the balancing protocol One of the following "RoundRobin" "WeightedRoundRobin" "LeastConnections"	string	0..*
			SLBNodePolicy	Element	SLB allocation policy information for each node	-	0..*
VLANs	Configuration	Settings information for VLANs	VLAN	Element	VLAN settings information	-	0..*
			PVID	Element	PVID settings information	-	0..*
VLAN	VLANs	VLAN settings information	id	Attribute	Unique identifier	ID	1
			vlanID	Attribute	VLAN ID	string	0..1
			vlanName	Attribute	VLAN name	string	0..1
			ipAddress	Attribute	IP address for when addresses are allocated to the VLAN	string	0..1
			subnetmask	Attribute	Subnet mask for when addresses are allocated to the VLAN	string	0..1
			taggedInterface	Attribute	Reference to an interface that has been set up as a tagged port for the VLAN * Interfaces where link aggregation or EtherChannel has been set up have only a master interface reference	IDREFS	0..1
			untaggedInterface	Attribute	Reference to an interface that has been set up as an untagged port for the VLAN * Interfaces where link aggregation or EtherChannel has been set up have only a master interface reference	IDREFS	0..1
PVID	VLANs	PVD settings information	id	Attribute	Unique identifier	ID	1
			vlanID	Attribute	VLANID (PVID value set for the interface)	string	0..1
			interface	Attribute	Reference to the interface (configure) where the PVID has been set	IDREF	0..1
SpanningTrees (Configuration)	Configuration	Settings information for spanning trees	STP	Element	Device STP settings information For CST, etc., the multiplicity is 0, ..., 1. For MST, etc., the multiplicity is 0, ..., *.	STP	0..*
STP (Configuration)	SpanningTree	Device STP settings information	id	Attribute	Unique identifier	ID	1
			instance-id	Attribute	Holds the instance ID for the spanning tree. (Required for MST)	string	0..1
			forwardDelay	Attribute	Transmission delay time	int	0..1
			helloTime	Attribute	Hello time	int	0..1
			maxage	Attribute	Maximum aging time	int	0..1
			maxhop	Attribute	Maximum hop count	int	0..1
			priority	Attribute	Bridge priority	int	0..1
			cost	Attribute	Path cost	int	0..1
			linktype	Attribute	Only required if the protocol is RSTP String indicating the link type "point-to-point" "shared"	string	0..1
			protocol	Attribute	String indicating the protocol type One of the following: "STP" "RSTP"	string	0..1
			mode	Attribute	String indicating the operating mode One of the following: "CST" "PVST" "PVST+" "MST"	string	0..1
			vlanRange	Attribute	Specify the range of VLANIDs using commas and hyphens Eg, 1,2,10-30 The multiplicity for VLANIDs depends on the mode For PVST: 1 For MST: 1..* For CST: 0	string	0..1
			STPInterface	Element	Reference to the STP settings information for each interface	-	0..*
STPInterface (Configuration)	STP	Port STP settings information	interface	Attribute	Reference to an interface where STP has been set up	IDREF	1
			cost	Attribute	The value of the 'cost' attribute for this interface	int	0..1
			priority	Attribute	The value of the 'priority' attribute for this interface	int	0..1
			status	Attribute	Reference to the status for the STPInterface item	IDREF	0..1
Redundancies (Configuration)	Configuration	Settings information for redundancies	HotStandby(Configuration)	Element	Hot standby information	-	0..*
HotStandby (Configuration)	Redundancies	Hot standby information	id	Attribute	Unique identifier	ID	1
			groupID	Attribute	The ID for a hot standby group that allows it to be uniquely identified within the device. The appropriate ID varies depending on the protocol type. VRRP ... VRID HSRP ... GroupID FJHS ... GroupID	string	0..1
			protocol	Attribute	String indicating the protocol type "other" "VRRP" "HSRP" "FJHS"	int	0..1
			virtualIPAddress	Attribute	Virtual IP address allocated to the HS group	string	0..1
			interface	Attribute	Reference to the HS interface	IDREF	0..1
			helloInterval	Attribute	Interval for transmitting hello packets (health packets)	int	0..1
			authentication	Attribute	Flag indicating whether to use an authentication function	boolean	0..1
			password	Attribute	Password to use when the authentication information is on	string	0..1
			priority	Attribute	Priority For the VRRP and HSRP protocols, higher values indicate higher priorities, but for the FJHS protocol, lower values indicate higher priorities	int	0..1
			deadTime	Attribute	Time to wait before deciding to switch the active device if a hello packet is not received	int	0..1
			preempt	Attribute	Flag indicating whether to run in preempt mode	boolean	0..1
			delayTime	Attribute	Delay time for switching active devices	int	0..1
			vmacAddress	Attribute	Virtual MAC address	string	0..1
			ripmode	Attribute	Flag indicating whether to perform RIP linking	boolean	0..1
			ripIPAddress	Attribute	IP address for the correspondent router when RIP linking is performed	string	0..1
			status	Attribute	Reference to the HS status information	IDREF	0..1
			TrackNode	Element	Node being tracked for HS switching	-	0..1
			TrackInterface	Element	Interface being tracked for HS switching	-	0..1
			FujitsuHotStandby	Element	Information specific to Fujitsu Hot Standby	-	0..1
FujitsuHotStandby	HotStandby	Information specific to Fujitsu Hot Standby	FujitsuHotStandbyGroup	Element	Fujitsu Hot Standby group	-	0..1
			FujitsuHotStandbyPeerNode	Element	Correspondent node for Fujitsu Hot Standby	-	0..*
FujitsuHotStandbyGroup	FujitsuHotStandby	Fujitsu Hot Standby group	srcMacAddrCtrl	Attribute	Flag indicating whether to control source MAC addresses	boolean	0..1
			workLimit	Attribute	If the total of the weights for correspondent routers used by the hot standby group that have errors exceeds this limit, the active and standby nodes will switch	int	0..1
			mcuChangeDelay	Attribute	The time required for starting hot standby operations (in seconds) when switchovers occur during MCU redundant operations	int	0..1
FujitsuHotStandbyPeerNode	FujitsuHotStandby	Fujitsu Hot Standby correspondent node	id	Attribute	Unique identifier	ID	1
			peerid	Attribute	ID of the correspondent router	string	0..1
			weight	Attribute	Weight for the correspondent router	int	0..1
			interface	Attribute	Reference to the interface for communicating with the correspondent router	IDREF	0..1
			alivemode	Attribute	Flag indicating whether to send alive packets	boolean	0..1
			alivepeerlimit	Attribute	Limit for the weights of correspondent routers	int	0..1
			alivepeergroup	Attribute	Hot standby group ID for the correspondent router and corresponding weight Use the following kind of format <GroupID>@<weight> Eg 1@10|11-20@3	string	0..1
			aliveresendInterval	Attribute	Resend interval for alive packets	int	0..1
			alivedeadInterval	Attribute	Interval for which alive packets are disabled	int	0..1
			alivertyInterfval	Attribute	Interval for checking whether alive packets have recovered	int	0..1
			alivesndInterval	Attribute	Interval for sending alive packets	int	0..1
			alivetriggermode	Attribute	Flag used to enable or disable trigger mode for alive confirmation packets	boolean	0..1
TrackNode	HotStandby	Node monitored for Hot Standby switching	ipAddress	Attribute	IP address of the monitored node	string	0..1
			resendInterval	Attribute	Packet resend interval	int	0..1
			normalInterval	Attribute	Normal packet transmission interval	int	0..1
			errorInterval	Attribute	Transmission interval when packet errors occur	int	0..1
			timeout	Attribute	Timeout time	int	0..1
			priority	Attribute	Priority subtracted when the monitored node fails	int	0..1
TrackInterface	HotStandby	Interface monitored for Hot Standby switching	interface	Attribute	Reference to the monitored interface (Configuration)	IDREF	1
			priority	Attribute	Priority subtracted when the monitored interface fails	int	0..1
StaticRoutings	Configuration	Settings information for static routings	StaticRouting	Element	Static routing information	-	0..*
StaticRouting	StaticRoutings	Static routing information	id	Attribute	Unique identifier	ID	1
			destinationAddress	Attribute	Destination address	string	0..1
			subnetmask	Attribute	Destination subnet mask	int	0..1
			gatewayAddress	Attribute	Gateway address	string	0..1
DynamicRoutings (Configuration)	Configuration	Settings information for dynamic routings	RIP	Element	RIP information	-	0..1
			OSPF	Element	OSPF information	-	0..1
			RoutingNetwork	Element	Network information	-	0..*
			AccessList	Element	Access list	-	0..*
			RouteMap	Element	Route map	-	0..*
RIP	DynamicRoutings	RIP settings information	id	Attribute	Unique identifier	ID	1
			invalidInterval	Attribute	Time to wait before deciding that a RIP route is disabled after packets stop being received on that route	int	0..1
			updateInterval	Attribute	Transmission interval for route notification packets	int	0..1
			holddownInterval	Attribute	Time to suppress update packet reception for routes that are held down	int	0..1
			flushInterval	Attribute	Time to wait before deleting a route from the RIP database	int	0..1
			neigborIPAddress	Attribute	IP address of the adjacent router node	string	0..1
			metric	Attribute	Default metric	int	0..1
			version	Attribute	String indicating the RIP version One of the following: "v1" "v2" "v1&v2"	string	0..1
			autosummary	Attribute	Flag indicating whether to merge subnet routes into network level routes (V2 only)	boolean	0..1
			defaultInformation	Attribute	Flag indicating whether to notify default routes	boolean	0..1
			routingnetwork	Attribute	Reference to the network for which routes are being switched	IDREFS	0..1
			outputdelay	Attribute	Transmission delay time	int	0..1
			RIPInterface	Element	RIP settings for each interface	-	0..*
			RIPOffsetList	Element	Metric offset value	-	0..*
			RIPDistance	Element	Distance for RIP route information	-	0..*
			DistributeList	Element	Settings information for routing distribution	-	0..*
			Redistribute	Element	Settings information for routing redistribution	-	0..*
RIPInterface	RIP	RIP interface information	id	Attribute	Unique identifier	ID	1
			inputVersion	Attribute	Version of RIP for receiving One of the following: "off" "v1" "v2" "v1&v2"	string	0..1
			outputVersion	Attribute	Version of RIP for sending One of the following: "off" "v1" "v2" "v1&v2"	string	0..1
			metric	Attribute	Metric value	int	0..1
			interface	Attribute	Reference to the interface that has been set	IDREF	0..1
			passiveInterface	Attribute	Flag indicating whether this interface is a passive interface	boolean	0..1
			splithorizon	Attribute	Flag indicating whether the splithorizon function has been enabled	boolean	0..1
			triggerUpdate	Attribute	Flag indicating whether to perform RIP trigger updates	boolean	0..1
			key	Attribute	Authentication key number	string	0..1
			keychain	Attribute	Authentication key	string	0..1
			keystring	Attribute	Authentication string	string	0..1
RIPOffsetList	RIP	Offset for RIP metrics	id	Attribute	Unique identifier	ID	1
			way	Attribute	String indicating the metric application direction One of the following: "in" # receiving "out" # sending	string	0..1
			interface	Attribute	Reference to the interface to which the offset applies If no instances are given, the offset applies to all interfaces	IDREF	0..1
			accesslist	Attribute	Reference to an access list	IDREF	0..1
			offset	Attribute	Offset value (1... 16)	int	0..1
RIPDistance	RIP	Distance for RIP route information	id	Attribute	Unique identifier	ID	1
			weight	Attribute	Distance value	int	0..1
			accesslist	Attribute	Reference to an access list	IDREF	0..1
DistributeList	RIP OSPF	Settings information for routing distribution	type	Attribute	String indicating the type "in" # receiving "out" # sending	string	0..1
			accesslist	Attribute	Reference to an access list	IDREF	0..1
Redistribute	RIP OSPF	Settings information for routing redistribution	protocol	Attribute	String indicating the protocol type One of the following: "connected" # the protocol that is currently connected "static" # static routing "RIP" "OSPF" "BGP"	string	0..1
			metric	Attribute	Metric value	int	0..1
			metricType	Attribute	String indicating the metric type (for OSPF only) One of the following: "Type-1Cost" "Type-2Cost"	string	0..1
			routemap	Attribute	Reference to a route map	IDREF	0..1
OSPF	DynamicRoutings	OSPF settings information	id	Attribute	Unique identifier	ID	1
			extraAreaDistance	Attribute	Priority (distance) for routes outside the AS	int	0..1
			intraAreaDistance	Attribute	Priority (distance) for routes inside the AS	int	0..1
			interAreaDistance	Attribute	Priority (distance) for routes between ASs	int	0..1
			metric	Attribute	Metric value	int	0..1
			metrictype	Attribute	String indicating the metric type One of the following: "Type-1Cost" "Type-2Cost"	string	0..1
			routerID	Attribute	Router ID	string	0..1
			spfdelay	Attribute	Delay (in seconds) from the time when a topology change is detected until the SPF calculation starts	int	0..1
			spfholdtime	Attribute	Minimum waiting interval (in seconds) until the next SPF calculation	int	0..1
			defaultInformation	Attribute	Flag indicating whether to notify the default gateway	boolean	0..1
			routingnetwork	Attribute	Reference to the network for which routes are being switched	IDREFS	0..1
			OSPFInterface	Element	OSPF settings information for each interface	-	0..*
			OSPFArea	Element	OSPF area information	-	0..*
			DistributeList	Element	Settings information for routing distribution	-	0..*
			Redistribute	Element	Settings information for routing redistribution	-	0..*
OSPFInterface	OSPF	OSPF settings information for each interface	id	Attribute	Unique identifier	ID	1
			authenticationType	Attribute	String indicating the type of authentication One of the following: "simple" "message-digest" * Required if authentication is performed	int	0..1
			interface	Attribute	Reference to the interface	IDREF	0..1
			authenticationKey	Attribute	Authentication keyword for OSPF packets (only required if authenticate is performed)	string	0..1
			authenticationID	Attribute	Authentication keyword number (only if the authentication type is "message-digest")	int	0..1
			cost	Attribute	Packet transmission cost	int	0..1
			deadInterval	Attribute	Restriction time until hello packets arrive	int	0..1
			helloInterval	Attribute	Transmission interval for the hello packets sent from the interface	int	0..1
			passive	Attribute	Flag indicating whether the interface is passive	boolean	0..1
			priority	Attribute	Router priority	int	0..1
			retransmitInterval	Attribute	Interval for resending LSAs to the OSPF neighbor under the interface	int	0..1
			transmitDelay	Attribute	Transmission delay time for LSUpdate packets	int	0..1
			area	Attribute	Reference to OSPF area information	IDREF	0..1
			routingnetwork	Attribute	Reference to the network being routed	IDREF	0..1
OSPFArea	OSPF		id	Attribute	Unique identifier	ID	1
			areaID	Attribute	OSPF area identifier	string	0..1
			areaType	Attribute	String indicating the OSPF area type One of the following: "nssa" # Quasi-stub area "backbone" # Backbone area "stub" # Stub area	string	0..1
			summary	Attribute	The meaning of this element depends on the area type. <stub> Flag indicating whether to notify aggregate link information to the stub area when running as an area border router <nssa> Flag indicating whether to issue Type-3-LSAs corresponding to routes learnt from other areas to NSSA areas	boolean	0..1
			routingnetwork	Attribute	Reference to the address for the network where routes are to be aggregated (only if the area type is "backbone")	IDREF	0..1
			advertise	Attribute	Flag indicating whether to notify Type-3-LSAs of aggregated routes (only if the area type is "backbone")	boolean	0..1
			redistribution	Attribute	Flag indicating whether to issue Type-7-LSAs corresponding to ASE-LSAs to NSSA areas (only if the area type is "nssa")	boolean	0..1
			defaultInformation	Attribute	Flag indicating whether to notify Type-7 default route information within NSSA areas when the router is running as an AS border router (only if the area type is "nssa")	boolean	0..1
			metric	Attribute	Metric value for notifying default routes (only if the area type is "nssa")	int	0..1
			metrictype	Attribute	Metric type for notifying default routes Metric type One of the following: "Type-1Cost" "Type-2Cost" (only if the area type is "nssa")	string	0..1
			translate-always	Attribute	Flag indicating whether to set the routers learnt from NSSA areas as area border routers to the backbone area as the routers that distribute routes using Type-5-LSAs (only if the area type is "nssa")	boolean	0..1
RoutingNetwork	DynamicRoutings	Routing network information	id	Attribute	Unique identifier	ID	1
			networkaddress	Attribute	Network address	string	0..1
			subnetmask	Attribute	Subnet mask	int	0..1
			areaID	Attribute	Area ID (only for OSPF)	int	0..1
AccessList	DynamicRoutings	Access control list	id	Attribute	Unique identifier	ID	1
			accesslistID	Attribute	Access list ID within the device	string	0..1
			AccessPolicy	Element	Access control policy	-	0..*
AccessPolicy	AccessList	Access control policy	permit	Attribute	Allow (true) or deny (false)	boolean	0..1
			type	Attribute	Type of control target One of the following: "network" # network "host" # host "all" # all	string	0..1
			ipAddress	Attribute	IP address to be allowed or denied	string	0..1
			subnetmask	Attribute	Subnet mask	int	0..1
RouteMap	DynamicRoutings	Route map information	id	Attribute	Unique identifier	ID	1
			permit	Attribute	Allow (true) or deny (false)	boolean	0..1
			tagname	Attribute	Route map tag name	string	0..1
			RouteMatch	Element	Route matching information	ID	0..*
			RouteSet	Element	Route settings information	ID	0..*
RouteMatch	RouteMap	Route matching information	type	Attribute	String indicating the type of match target One of the following: "interface" "path" "ip" "nexthop" "metric"	string	0..1
			value	Attribute	Value to be compared	string	0..1
			accessList	Attribute	Reference to an access list Only if the type of match target is "path", "ip" or "nexthop"	IDREF	0..1
RouteSet	RouteMap	Route settings information	type	Attribute	String indicating the type of target to be set One of the following: "interface" "ip" "nexthop" "metric" "metrictype" "weight"	string	0..1
			value	Attribute	Value to be set	string	0..1
AddressTranslations	Configuration	Settings information for address translations	NAT	Element	NAT information	NAT	0..*
NAT	AddressTranslations	NAT information	id	Attribute	Unique identifier	ID	1
			name	Attribute	NAT policy name	string	0..1
			type	Attribute	String indicating the NAT type One of the following: "SNAT" # source NAT "DNAT" # destination NAT "NAPT" # IP masquerade	string	0..1
			externalAddress	Attribute	External address(es) Use the following format to specify multiple addresses: Eg, 10.24.8.[1-10,20]	string	0..1
			internalAddress	Attribute	Internal address(es) Use the following format to specify multiple addresses: Eg, 10.24.8.[1-10,20]	string	0..1
			externalPort	Attribute	External port number Use "0" to indicate a wildcard	int	0..1
			internalPort	Attribute	Internal port number Use "0" to indicate a wildcard	int	0..1
ACL	Configuration	Settings information for access control	AccessControlInterface	Element	Access control settings information for each interface	-	0..*
			AccessControl	Element	Access control information	-	0..*
			FilteringPolicy	Element	Filtering information	-	0..*
AccessControlInterface	ACL	Settings information for access control for each interface	id	Attribute	Unique identifier	ID	1
			interface	Attribute	Reference to settings information (Interface(Configuration)) for logical interfaces where ACL settings have been made	IDREF	1
			accessControl	Attribute	Reference to settings information for access control	IDREFS	1
AccessControl	ACL	Access control information	id	Attribute	Unique identifier	ID	1
			name	Attribute	Access control name	string	0..1
			way	Attribute	Control direction One of the following: "in" # Reception "out" # Transmission "any" # Both reception and transmission "reverse" # Both reception and transmission (reversing the IP address and port number for the sender and destination when receiving) "in-enciphered" # Evaluation using plain text when decrypting encrypted packets sent to the device	string	0..1
			action	Attribute	Control method One of the following: "accept" # Allow "drop" # Discard "reject" # Deny "redirect" # Forward "remove" # Delete content (HTTP) etc "restrict" # Allow when connecting, discard when disconnecting	string	0..1
			priority	Attribute	Priority	int	0..1
			nat	Attribute	Reference to NAT translation information	IDREF	0..1
			filteringPolicy	Attribute	Reference to filtering information	IDREF	1
FilteringPolicy	ACL	Filtering information	id	Attribute	Unique identifier	ID	1
			name	Attribute	Filtering policy name	string	0..1
			judge	Attribute	Judgment method One of the following: "any" # Matches at least one "all" # Matches all	string	0..1
			MatchAnyFilter	Element	Match any filter	-	0..*
			MACAddressFilter	Element	MAC address filter	-	0..*
			IPAddressFilter	Element	IP address filter	-	0..*
			PortFilter	Element	Port filter	-	0..*
			ProtocolFilter	Element	Protocol filter	-	0..*
MatchAnyFilter	FilteringPolicy	Match any filter	id	Attribute	Unique identifier	ID	1
MACAddressFilter	FilteringPolicy	MAC address filter	id	Attribute	Unique identifier	ID	1
			type	Attribute	Type One of the following: "dest" # destination MAC address "source" # source MAC address	string	0..1
			operator	Attribute	Relational operator One of the following: "= " "!= "	string	0..1
			macaddress	Attribute	MAC address If there are multiple MAC addresses, separate addresses using commas ",". To specify a range of consecutive MAC addresses, specify the first and last MAC address, separated by a hyphen "-"	string	0..1
IPAddressFilter	FilteringPolicy	IP address filter	id	Attribute	Unique identifier	ID	1
			type	Attribute	Type One of the following: "dest" # destination IP address=0, "source" # source IP address	string	0..1
			operator	Attribute	Relational operator One of the following: "= " "!= "	string	0..1
			command	Attribute	Address If there are multiple addresses, separate addresses using commas ",". To specify a range of consecutive addresses, specify the first and last MAC address, separated by a hyphen "-" For subnet addresses, enter the mask length at the end as "/XX"	string	0..1
PortFilter	FilteringPolicy	Port filter	id	Attribute	Unique identifier	ID	1
			type	Attribute	Type One of the following: "dest" # destination port number "source" # source port number	string	0..1
			operator	Attribute	Relational operator One of the following: "= " "!= " "<=," ">=" "<," ">"	string	0..1
			port	Attribute	Port number If there are multiple port numbers, separate port numbers using commas ",". To specify a range of consecutive port numbers, specify the first and last port numbers separated by a hyphen "-".	string	0..1
			protocol	Attribute	Protocol type One of the following: "tcp" "udp" "tcp-udp"	string	0..1
ProtocolFilter	FilteringPolicy	Protocol filter	id	Attribute	Unique identifier	ID	1
			operator	Attribute	Relational operator One of the following: "= " "!= " "<=," ">=" "<," ">"	string	0..1
			protocol	Attribute	Protocol number If there are multiple protocol numbers, separate port numbers using commas ",". To specify a range of consecutive protocol numbers, specify the first and last protocol numbers separated by a hyphen "-".	string	0..1
Software	NetworkDevice	Device software (firmware)	name	Attribute	Software name Eg, "IOS (tm) 3600 Software (C3620-I-M)"	string	0..1
			version	Attribute	Software version The notation method depends on the model, so the format is not specified here. Use the device specific notation as is. Eg, Version 12.1(11)	string	0..1
			compileDate	Attribute	Compilation date The notation method depends on the model, so the format is not specified here. Use the device specific notation as is. Eg, "02-Oct-01 21:40"	string	0..1
Identity	NetworkDevice	Device identification information	vendorID	Attribute	Vendor identifier Eg, "Fujitsu"	string	0..1
			SNMP	Element	Information for identifying the device via SNMP	string	0..1
SNMP (Identity)	Identity	SNMP identification information	sysDescr	Attribute	The 'sysDescr' string for the device Refer to RFC1213 for more information	string	0..1
			sysObjectId	Attribute	The 'sysObjectId' string for the device Refer to RFC1213 for more information	string	0..1