Format
stphanet [-m]
Description
Deactivates all virtual adapters set using the hanetconfig command and stops ping monitoring.
Options
-m
Pauses all virtual adapters set by the hanetconfig command. If ping monitoring is activated, ping monitoring is stopped. Use this option only for maintenance tasks for GLS drivers.
Notes
You must close all higher level applications before deactivating virtual adapters. If a virtual adapter is set for higher level applications, delete the virtual adapter.
You must close all higher level applications before pausing virtual adapters.
Once you have deactivated or paused a virtual adapter, it remains deactivated or paused even when you restart the system. Use the strhanet command to activate the virtual adapter. For more details, refer to "6.2.7 strhanet."
Make sure that the network properties screen is closed before running this command. Otherwise, an error may occur in executing the command.
It may take about 30 seconds for each virtual adapter to be deactivated.
After executing the stphanet command, all installed network functions will be enabled for physical adapters which have been bundled. Installed network functions are displayed on the [Properties] window by selecting the target physical adapter from [Control Panel] - the [Network Connections] windows. Uncheck the check box of the network function which should be disabled.
This command is not available in safe mode.
Do not force termination of the stphanet command while it is running. If you do so, you cannot activate a virtual adapter with the name at the termination. In this case, execute the stphanet command again and delete the virtual adapter setting, and then create a virtual adapter with another virtual adapter name.
Example
1
To deactivate all virtual adapters:
> stphanet |
2
To pause all virtual adapters:
> stphanet -m |
