Top
ServerView Resource Orchestrator V3.1.0 Messages

20.7 Messages VSYS10500 to VSYS10586

VSYS10500

System-ID[{0}] has already been deployed.

Description

The L-Platform with the specified L-Platform ID has already been deployed.

Parameter

{0}: L-Platform ID

Action

Check whether there is a problem with the L-Platform ID of the L-Platform to be deployed.
If the L-Platform ID is correct, contact Fujitsu technical support.

VSYS10501

The server operating in the system[{0}] exists.

Description

The L-Platform includes a server that is currently running.

Parameter

{0}: L-Platform name

Action

Stop the managed server that is running, and then return the system again.

VSYS10502

These servers [{0}] operating in the system[{1}] exists.

Description

The L-Platform includes a server that is currently running.

Parameter

{0}: Server ID

{1}: L-Platform ID

Action

Stop the managed server that is running, and then reconfigure the L-Platform.

VSYS10503

Resource_id [server#deploy_master] of a new server is not null. {0}

Description

In server#deploy_master, the resource_id of the new server information to be added is not null.

Parameter

{0}: Exception information

Action

The configuration cannot be changed because there is a problem with the information for the managed server being added.
Contact Fujitsu technical support.

VSYS10504

Resource_id [vdisk#deploy_master] of a new disk is not null.{0}

Description

In vdisk#deploy_master, the Resource_id of the information for the new disk to be added is not null.

Parameter

{0}: Exception information

Action

The configuration cannot be changed because there is a problem with the information for the managed disk being added.
Contact Fujitsu technical support.

VSYS10505

Nic of a new server is missed[vnic#deploy_master].{0}

Description

The NIC information (vnic#deploy_master) for the new server is missing.

Parameter

{0}: Exception information

Action

Check whether there is a problem with the settings for the <vnic> tag in the registered template information file.
If there are no problems with the template information file, contact Fujitsu technical support.

VSYS10506

VNet:{0} is not registered in [vnet#deploy_master].

Description

The "vent" used by the "vnic#deploy_master" has not been registered with the "vnet#deploy_master".

Parameter

{0}: Network ID

Action

Check whether there are any problems with the <vnet> tag in the registered template information file.
If there are no problems with the template information file, contact Fujitsu technical support.

VSYS10507

Status that related Image-ID [SERVER-ID: {0}] doesn't exist in table [<image>].

Description

The image ID associated with SERVER-ID: {0} does not exist in the image table.

Parameter

{0}: Server ID

Action

Check whether image information that is being used by the L-Platform that has been deployed has been deleted.
If the image information has been deleted, register it again, and then try again.
If the error persists, contact Fujitsu technical support.

VSYS10508

Resource_id [{0}] is null. {1}.

Description

The "rid" for the table is null.

Parameter

{0}: Table name

{1}: Resource ID

Action

Check if Resource Management function is operating normally.
If Resource Management function is operating normally, contact Fujitsu technical support.

VSYS10509

The server backuping in the system [{0}] exists.

Description

The L-Platform includes a server that is currently being backed up.

Parameter

{0}: L-Platform ID

Action

Check the status of the managed server, and then reconfigure the L-Platform.

VSYS10510

The server restoring in the system [{0}] exists.

Description

The L-Platform includes a server that is currently being restored.

Parameter

{0}: L-Platform ID

Action

Check the status of the managed server, and then reconfigure the L-Platform.

VSYS10511

The disk backuping in the system [{0}] exists.

Description

The L-Platform includes a disk that is currently being backed up.

Parameter

{0}: L-Platform ID

Action

Check the status of the managed server, and then reconfigure the L-Platform.

VSYS10512

The disk restoring in the system [{0}] exists.

Description

The L-Platform includes a disk that is currently being restored.

Parameter

{0}: L-Platform ID

Action

Check the status of the managed server, and then reconfigure the L-Platform.

VSYS10513

[{0}] was not able to be acquired from CBRM.

Description

{0} could not be obtained from the Resource Management function.

Parameter

{0}: Item name of the return value

Action

Check if the Resource Management function is operating normally.
If the Resource Management function is operating normally, contact Fujitsu technical support.

VSYS10514

Status that related IP Pool doesn't exist in table [{0}].

Description

The IP Pool information associated with [tenant name:{0}] does not exist in the table.

Parameter

{0}: Tenant name

Action

Contact Fujitsu technical support.

VSYS10515

System name already exists. System name=[{0}]

Description

The -Platform name already exists.

Parameter

{0}: L-Platform name

Action

Specify a different L-Platform, and then try again.

VSYS10520

Network resource is not found. System name=[{0}].

Description

A network resource did not exist when the subnet was selected automatically.

Parameter

{0}: L-Platform name

Action

Check whether the network resource has been registered with Resource Management function.

VSYS10521

IP address are missing. System name=[{0}].

Description

There were not enough IP addresses when the subnet was selected automatically.

Parameter

{0}: L-Platform name

Action

Add the number of IP addresses required to deploy the L-Platform using Resource Management function.

VSYS10522

Network resource is not found [System-ID:{0} Template-ID:{1} resourceName:{2}].

Description

The network resource corresponding to the network resource name specified in the template meta-information could not be obtained when the L-Platform was deployed.

Parameter

{0}: L-Platform ID

{1}: Template ID

{2}: Network resource name

Action

Check whether the network resource name specified by the <resourceName> tag under the <vnet> tag for the registered L-Platform template information.

VSYS10523

There is no network that can be selected. System name=[{0}]

Description

There were no automatic selection target network resources, therefore the L-Platform distribution failed.

Parameter

{0}: L-Platform ID

Action

Check whether the category and segment identifier information setting of the segment information and template information is valid.

VSYS10524

There is no effective L-Server template. [L-Server Name:{0}]

Description

Import of the L-Server failed because a valid L-Server template is not registered.

Parameter

{0}: L-Platform name

Action

Check that there is an L-Server template registered that meets the following conditions:

  • There is one or fewer definitions for disk (<Disk> tag)

  • The definition for the server type (<ServerType> tag) matches the L-Server being imported

  • The CPU (<CPU> tag) and memory (<Memory> tag) are defined

    (CPU and memory must also be defined if it is a physical server.)

VSYS10530

Resource [System-ID:{0}] doesn't exist.

Description

The instance for the specified L-Platform ID did not exist during the processing that sets up middleware parameters.

Parameter

{0}: L-Platform ID

Action

A conflict has occurred with the internal processing.

Contact Fujitsu technical support.

VSYS10532

The system has been already set to SETUP. [{0}]

Description

The specified L-Platform has already been set to SETUP status.

Parameter

{0}: L-Platform ID

Action

Check the status of the L-Platform.
Check whether there is an error with the specified L-Platform ID.

VSYS10533

The system has not been set to SETUP. [{0}]

Description

The specified L-Platform has not been set to SETUP status.

Parameter

{0}: L-Platform ID

Action

Check the status of the L-Platform.
Check whether there is an error with the specified L-Platform ID.

VSYS10540

The maximum number of systems that can be deployed simultaneously has been exceeded. [System-ID:{0} deploying:{1} request:{2} limit:{3}]

Description

The maximum number of the L-Platform that can be deployed simultaneously has been reached.

Parameter

{0}: L-Platform ID

{1}: Number of the L-Platform that are being deployed

{2}: Requested number of the L-Platform to be deployed

{3}: Maximum number of the L-Platform that can be deployed

Action

Wait for a few moments, and then make another deployment request.

VSYS10541

The maximum number of servers that can be deployed simultaneously has been exceeded. [System-ID:{0} deploying:{1} request:{2} limit:{3}]

Description

The maximum number of servers that can be deployed simultaneously has been reached.

Parameter

{0}: L-Platform ID

{1}: Number of servers that are being deployed

{2}: Requested number of servers to be deployed

{3}: Maximum number of servers that can be deployed

Action

Wait for a few moments, and then make another deployment request.

VSYS10550

Value is illegal. {0}=[{1}]

Description

There is an error with the specified parameter value.

Parameter

{0}: Item name of the parameter

{1}: Specified parameter

Action

A conflict has occurred with the internal processing.

Contact Fujitsu technical support.

VSYS10551

The status of the deploy master is {0}. [System-ID:{1} User-ID:{2} Org-ID:{3}]

Description

The status of the deployment master is invalid.

Parameter

{0}: Status of the deployment master

{1}: L-Platform ID

{2}: User ID

{3}: Tenant name

Action

A conflict has occurred with the internal processing.

Contact Fujitsu technical support.

VSYS10552

The server of [Server Name:{0}] doesn't exist.

Description

Either there is a problem with the server name, or the server has already been returned.

Parameter

{0}: Server name

Action

Check if the server name is correct.

VSYS10553

The unknown error from the ROR when you try to check the system [System-ID:{0}] on ROR.

Description

The response status code from the Resource Management function is invalid (contains no error information).

Parameter

{0}: L-Platform ID

Action

Check if Resource Management function is operating normally.
Or, check that there are no errors in the following file for the connection destination information and authentication information settings for the Resource Management function:

[Windows Manager]

Installation_folder\RCXCFMG\config\vsys_config.xml

[Linux Manager]

/etc/opt/FJSVcfmg/config/vsys_config.xml

If the error persists, contact Fujitsu technical support.

VSYS10554

The unknown error from the ROR when you try to check the server [SERVER-ID:{0}] on ROR.

Description

The response status code from the Resource Management function is invalid (contains no error information).

Parameter

{0}: Server ID

Action

Check if Resource Management function is operating normally.
Or, check that there are no errors in the following file for the connection destination information and authentication information settings for the Resource Management function:

[Windows Manager]

Installation_folder\RCXCFMG\config\vsys_config.xml

[Linux Manager]

/etc/opt/FJSVcfmg/config/vsys_config.xml

If the error persists, contact Fujitsu technical support.

VSYS10555

The system of [System-ID:{0}] is existing in ROR. It's status cannot be changed to [undeploy].

Description

The L-Platform with the specified L-Platform ID exists on Resource Management.

Parameter

{0}: L-Platform ID

Action

Check the L-Platform status.
To forcibly remove the L-Platform, execute the command again with the "-f" option specified.

VSYS10556

The server of [SERVER-ID:{0}] is existing in ROR. It's status cannot be changed to [undeploy].

Description

The server with the specified server name exists on Resource Management.

Parameter

{0}: Server ID

Action

Check the server status.
To forcibly remove the server, execute the command again with the "-f" option specified.

VSYS10557

The flow status of instance is {0}. [System-ID:{1}]

Description

When an application to return the L-Platform was submitted, the submission status was invalid.

Parameter

{0}: Submission status

{1}: L-Platform ID

Action

A conflict has occurred with the internal processing.
Contact Fujitsu technical support.

VSYS10560

Resource[Org-ID:{0} System Name:{1}] doesn't exist.

Description

The L-Platform ID that corresponds to the L-Platform name could not be obtained when the L-Platform recovery was launched.

Parameter

{0}: Tenant name

{1}: L-Platform name

Action

Check whether the L-Platform name of the information saved in the configuration when the recovery was launched, and the L-Platform name specified in the recovery command input file, are valid.
If none of the above applies, contact Fujitsu technical support.

VSYS10561

Settings[{0}] do not match. [System-ID:{1}]

Description

An input information error was discovered when the L-Platform recovery was launched.

Parameter

{0}: Location of error discovery

{1}: L-Platform ID

Action

  • If "SERVER" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file server definition, is valid.

  • If "IPADDRESS" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file IP address definition, is valid.

  • If "DISK" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file disk definition, is valid.

  • If "NETWORK" is displayed in {0}, check whether the information saved in the configuration, or the recovery command input file network definition, is valid.

If none of the above applies, contact Fujitsu technical support.

VSYS10562

The disk of [DISK-ID:{0}] is existing in ROR. It's status cannot be changed to [undeploy].

Description

A disk with the specified disk ID already exists.

Parameter

{0}: Disk ID

Action

Check the disk status.
To delete the disk by force, specify the "-f" option then re-execute the command.

VSYS10563

The disk of [DiskName:{0}] doesn't exist.

Description

The disk with the specified disk name does not exist.

Parameter

{0}: Disk ID

Action

Check whether the disk name specified in the unnecessary data deletion command data is valid.

VSYS10564

Value is illegal. [{0}]

Description

There is an error with the value specified in the server specification.

Parameter

{0}: Parameter name in the server specification

Action

Check for any errors with the values in the server specification that were specified at deployment time.
If the cause of the problem is other than the above, contact Fujitsu technical support.

VSYS10565

Resource ID is null. [L-Server Name:{0}]

Description

The resource ID cannot be obtained.

Parameter

{0}: L-Server name

Action

Check whether the L-Server name specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.

VSYS10566

Image does not exist. [Image ID:{0}]

Description

The image information does not exist.

Parameter

{0}: Image ID

Action

Check whether the image ID specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.

VSYS10567

The server is already imported. [L-Server Name:{0}]

Description

The L-Server has already been imported.

Parameter

{0}: L-Server name

Action

Check whether the L-Server name specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.

VSYS10570

No NIC on the server. [L-Server Name:{0}]

Description

The L-Server does not have a NIC.

Parameter

{0}: L-Server name

Action

L-Servers that do not have NICs cannot be imported.

VSYS10571

Pool does not exist. [Pool Name:{0}]

Description

The specified pool does not exist.

Parameter

{0}: Pool name

Action

Check whether the pool name specified for the L-Server import (cfmg_importlserver) command is correct.
If the cause of the problem is other than the above, contact Fujitsu technical support.

VSYS10572

Invalid Software-ID. [L-Server Name:{0}]

Description

The software ID is invalid.

Parameter

{0}: L-Server name

Action

Check whether the software ID specified for the L-Server import (cfmg_importlserver) command is correct, and whether software information for an operating system has been specified.
If the cause of the problem is other than the above, contact Fujitsu technical support.

VSYS10573

The imput value is illegal. [Tag name: {0}]

Description

The firewall update processing input value is incorrect.

Parameter

{0}: Tag name

Action

An inconsistency occurred in internal operations.
Contact Fujitsu technical support.

VSYS10574

LNetDev resource id is null. [System-ID:{0}][LNetDev Name:{1}]

Description

The firewall resource ID cannot be obtained.

Parameter

{0}: L-Platform ID

{1}: LNetDev name

Action

An inconsistency occurred in internal operations.
Contact Fujitsu technical support.

VSYS10575

The server cloning in the system[{0}] exists.

Description

The server cloning in the L-Platform exists.

Parameter

{0}: L-Platform ID

Action

Check the status of the managed server, then re-execute.

VSYS10576

Network resource does not exist. [Network Resource Name:{0}]

Description

Network resource does not exist.

Parameter

{0}: Network resource name

Action

Check whether the network resources set for the import target L-Server specified in the L-Server import (cfmg_importlserver) command exist in the import destination tenant.
If none of the above applies, contact Fujitsu technical support.

VSYS10577

Because the number of servers in the system became 0, the server cannot be deleted. [System-ID:{0}]

Description

If the add and remove server operations are executed at the same time and the attempt to add the server fails, server deletion processing is cancelled because there are no servers in the L-Platform.

Parameter

{0}: L-Platform ID

Action

Eliminate the cause of the failure to add the server, and then re-execute the operation to remove the server.

VSYS10578

No interface definition on the LNetDev. [System-ID:{0}]

Description

The interface is not defined on the firewall.

Parameter

{0}: L-Platform ID

Action

Check whether the L-Platform template firewall settings are valid.
If none of the above applies, contact Fujitsu technical support.

VSYS10579

Can't move the system. [System-ID:{0}][Reason:{1}]

Description

The specified L-Platform cannot be moved.

Parameter

{0}: L-Platform ID

{1}: Cause

Action

Confirm the cause which is displayed.

VSYS10580

Folder name is duplicated. [Tenant-Name:{0}][System-ID:{1}]

Description

A folder with the same name as the L-Platform folder you tried to move to the specified move destination tenant already exists.

Parameter

{0}: Tenant name

{1}: L-Platform name

Action

Check whether a folder with the same name as the L-Platform folder you tried to move to the move destination tenant already exists.

VSYS10581

The state of L-Server is illegal. [L-Server Name:{0}]

Description

Invalid L-Server power source status.

Parameter

{0}: L-Server name

Action

Check the import target L-Server power source status that is specified in the L-Server import (cfmg_importlserver) command.
If the import target L-Server exists outside the tenant folder, it will be necessary to set the power source of the import target L-Server to OFF.

VSYS10582

User doesn't belong to the tenant. [Tenant-Name:{0}][User-ID:{1}]

Description

The user does not belong to the specified tenant.

Parameter

{0}: Tenant name

{1}: User ID

Action

Confirm which tenant the specified user belongs to.

VSYS10583

The specified tenant name is illegal. [Org-ID:{0}]

Description

The tenant name is illegal.

Parameter

{0}: Tenant name

Action

Check whether the tenant name specified in the L-Server import (cfmg_importlserver) command is valid.

VSYS10584

The specified user does not exist. [Org-ID:{0}][User-ID:{1}]

Description

The user does not exist.

Parameter

{0}: Tenant name

{1}: User ID

Action

Check whether the user or tenant name specified in the L-Server import (cfmg_importlserver) command is valid.

VSYS10585

Template does not exist. [System-ID: {0}][Template-ID: {1}][Template-Name: {2}]

Description

The L-Platform template does not exist.
Alternatively, there are multiple L-Platform templates using the same name.

Parameter

{0}: L-Platform ID

{1}: L-Platform Template ID

{2}: L-Platform Template name

Action

If an L-Platform template with the displayed name does not exist, retry after creating an L-Platform template.
If multiple L-Platform templates are using the displayed name, correct the template ID in the additional information file and retry.

VSYS10586

The state of the power supply of the server cannot be acquired. [System-ID: {0}]

Description

The state of the power supply of the server in the specified L-Platform cannot be acquired.

Parameter

{0}: L-Platform ID

Action

Check whether the specified L-Platform ID is valid.
If the above does not apply, contact Fujitsu technical support.

VSYS10588

Cannot start servers of the tenant [{0}]: {1}

Description

The servers of a specified tenant cannot be started because of one of the following causes.

  • There is an L-Platform being deployed or reconfigured, or there is no L-Platform in normal state.

  • There is an L-Platform locked by another user.

  • There is an L-Platform in an application process.

  • There is a server being started, stopped, backed up, restored, or cloned.

  • There is no stopped server that is subject to collective power operation.

Parameter

{0}: Tenant name

{1}: Cause

Action

Retry the operation after the cause is removed.

VSYS10589

All the specified tenants have some errors.

Description

There is no tenant of which the servers can be started or stopped because all the specified tenants have some errors.

Action

Deal with VSYS10588 or VSYS10590 messages output for each tenants.

VSYS10590

Cannot stop servers of the tenant [{0}]: {1}

Description

The servers of a specified tenant cannot be stopped because of one of the following causes.

  • There is an L-Platform being deployed or reconfigured, or there is no L-Platform in normal state.

  • There is an L-Platform locked by another user.

  • There is an L-Platform in an application process.

  • There is a server being started, stopped, backed up, restored, or cloned.

  • There is no running server that is subject to collective power operation.

Parameter

{0}: Tenant name

{1}: Cause

Action

Retry the operation after the cause is removed.

VSYS10597

The system status cannot be set to specified status. [{0}]

Description

Cannot change the specified status.

Parameter

{0}: Specified status string

Action

Check that there are no errors in the specified status string.

VSYS10598

Deploying the L-Platform is unsupported. [System-ID:{0}]

Description

Deployment of Solaris container servers is not supported.

Parameter

{0}: L-Platform ID

Action

Check whether the VMType of the L-Server template is valid.
If the above does not apply, contact Fujitsu technical support.