B.5.1 Creating an L-Server Using an L-Server Template

When there are no cloning images, or when not using already registered cloning images
1. Create an L-Server Using an L-Server Template
  Create an L-Server, referring to "16.1 Creation Using an L-Server Template" of the "User's Guide for Infrastructure Administrators (Resource Management) CE".
  In this case, perform the following configuration:
  - Select [None] for images.
  - Check if the [Single path mode] checkbox for FC path is checked.
  - When specifying "None" for images, the [Single path mode] checkbox for FC path is automatically checked.
2. Manually Install an OS
  Refer to "B.5.3 Manual OS Installation".
3. Install a Multipath Driver (when using a Multipath for the Path to the SAN)
  When using multipaths between L-Server and SAN, install the multipath driver for the L-Server.
  For details on how to install the multipath driver, refer to the multipath driver manual.
4. Stop the L-Server
  For details on stopping L-Servers, refer to "17.1.2 Stopping an L-Server" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
5. Change the SAN Path Status of the L-Server
  Follow the procedure below to change the SAN path status of the L-Server.
  1. Right-click the target L-Server in the orchestration tree, and select [Change Settings]-[Modify Specification] from the popup menu.
    The [Modify an L-Server] dialog is displayed.
  2. Uncheck the [Single path mode] checkbox for FC path.
  3. Click <OK>.
6. Start the L-Server
  For details on starting L-Servers, refer to "17.1.1 Starting an L-Server" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
7. Install the Agent
  It is necessary to install an agent after installing the OS, and then register it.
  For details on installing agents, refer to "2.2 Agent Installation".
8. Register the Agent
  Use the following procedure to register an agent on the server used as an L-Server.
  1. Right-click the target L-Server in the orchestration tree, and select [Register]-[Agent] from the popup menu.
  2. Click <OK>.
    The [Register Agent] dialog is displayed.
  3. Click <OK>.
When using an existing cloning image
Create an L-Server, referring to "16.1 Creation Using an L-Server Template" of the "User's Guide for Infrastructure Administrators (Resource Management) CE". In this case, specify the cloning image that you want to use as an image.