3.2.3 Message Output During Operation

[MCPC-ERR001] Failed to get policy information.
%s

Variable Information

%s: the following three incorrect messages

The required file does not exist.
An error occurred when inputting file.
Other causes.

Cause

The required file does not exist because the program is operating.
An error occurred when inputting or outputting file.
Unknown error.

Resolution

Please confirm whether the following files exist in the installation folder of Management Console. In addition, please do not modify these file names.
- fsw01eja.exe
- PCSetting.ini
Please confirm whether the folder that is prohibited to be written can be selected as output target path. Or confirm whether the input folder path contains UNICODE character.
Please click the [Create] button again.

If it still cannot be created, please contact the system administrator.

[MCPC-ERR002] Please enter the startup password.

Cause

The startup password is not entered.

Resolution

Please enter startup password.

[MCPC-ERR003] The characters not allowed are used in the password. The following character are not allowed.
"&, \, : , ?, ", ~, ^, ', <, >, |, double-byte characters and single-byte space."

Cause

The characters (&, \, :, ?, ", ~, ^, ', <, >, |, double-byte characters and single-byte space) not allowed are entered in the password.

Resolution

Please enter only with characters that can be used.

[MCPC-ERR004] The start date of period is later than the finish date of period. Please select the start date of period <= the finish date of period.

Cause

The start date of period has exceeded the end date.

Resolution

Please select according to the start date <= and end date of period.

[MCPC-ERR005] The start time of period is later than the finish time of the period. Please select the start time of period < the finish time of period.

Cause

The start time of period is the same as the end time, or the start time has exceeded the end time.

Resolution

Please select according to the rules of start time < and end time of period.

[MCPC-ERR007] The folder name is too long. The maximum length of folder name can be specified is 260 bytes in full path.

Cause

The folder name is too long.

Resolution

It contains the output file name and please specify within 260 bytes.

[MCPC-ERR008] Failed to start the Policy Application Tool creation program.
The policy application tool creation program can only be executed on the terminal with the client of Systemwalker Desktop Keeper V14g installed.

Cause

The policy application tool is prepared to be performed in the environment without client.

Resolution

Please execute under the environment with client.

[MCPC-ERR009] Control characters are contained in startup password. Control characters are not allowed in startup password.

Cause

The startup password contains control code.

Resolution

The control code cannot be used in startup password.

[MCPC-SEL003] The selected folder already exists [%s]. Overwrite?

Variable Information

%s: folder name

Cause

Resolution

When overwriting directly, please click the [OK] button, when finishing the processing, please click the [Cancel] button.

[MCPC-SEL004] Create Policy Application Tool. Execute?
Computer name of the selected CT : %1
Name : %2
Application type : %3
Executable period : %4
Executable time : %5
Startup password : %6

Variable Information

%1: computer name

%2: name

%3: application type

%4: period that can be executed for policy application tool

%5: time that can be executed for policy application tool

%6: startup password

Cause

Prepare to create policy application tool.

Resolution

When continuing to create, please click the [OK] button. When finishing the processing, please click the [Cancel] button.

[MCPC-SEL005] The selected period is earlier than time. Create Policy Application Tool?

Cause

The period you selected is past time.

Resolution

When continuing, please click the [OK] button.

[MGAG-ERR001] Please enter the connection target server name.

Cause

The name of server to be connected is not entered.

Resolution

Please enter the name of server to be connected.

[MGAG-ERR002] Please enter a group name.

Cause

The group name is not entered.

Resolution

Please enter the group name.

[MGAG-ERR003] Same group name exists.

Cause

The same group name exists.

Resolution

Please modify the group name.

[MGCA-ERR001] The interval of monitoring attached data transfer is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the transmission monitoring interval of attached data.

Resolution

Please enter a value between 1 and 999.

[MGCA-ERR002] The interval of attached data transfer is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the transmission monitoring interval (transmitting continuously) of attached data.

Resolution

Please enter a value between 0 and 999.

[MGCA-ERR003] The invalid interval of screen capture is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the invalid interval between the screen capture and the next screen capture.

Resolution

Please enter a value greater than 0.

[MGCA-ERR004] The maximum number of images can be saved in CT is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the maximum number of images that can be saved in the CT.

Resolution

Please enter a value between 1 and 999.

[MGCA-ERR005] The printer increasing/decreasing monitor interval is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the increasing and decreasing monitoring interval of printer.

Resolution

Please enter a value between 15 and 999.

[MGCA-ERR006] Number of times of printing job monitoring.

Cause

The value excluding the scope or single-byte numerals is entered in the printing job monitoring times.

Resolution

Please enter a value between 3 and 9.

[MGCA-ERR007] The interval of Log Sending is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the log sending interval.

Resolution

Please enter a value between 60 and 9999.

[MGCA-ERR008] The interval during continuous sending is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the interval of continuously sending.

Resolution

Please enter a value between 30 and 9999.

[MGCA-ERR009] The maximum number of logs can be sent at one time is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the maximum number of logs that can be sent for one time.

Resolution

Please enter a value between 100 and 5000.

[MGCA-ERR010] he communication timeout is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the connection timeout.

Resolution

Please enter a value between 30 and 300.

[MGCA-ERR011] The interval of sending each log is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in each log sending interval.

Resolution

Please enter a value between 50 and 5000.

[MGCA-ERR012] The interval of monitoring server connection is incorrect.

Cause

The value excluding the scope or single-byte numerals is entered in the server connection monitoring interval.

Resolution

Please enter a value between 30 and 900.

[MGCA-ERR013] The maximum total size of original of file export is incorrect.

Cause

The value excluding the range from 1 to 700, or characters excluding the numerals are entered in the aggregated maximum size of original file of file export.

Resolution

Please enter a value between 1 and 700.

[MGCA-ERR014] The maximum size of a single file is incorrect.

Cause

The value excluding the range from 1 to 50, or characters excluding the numerals are entered in the maximum size of single file.

Resolution

Please enter a value between 1 and 50.

[MGCA-SEL001] Update terminal operation settings. Execute?

Cause

Prepare to update terminal operation settings.

Resolution

When updating, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCA-SEL002] Specify CT as the location for saving attached data. It may occupy local disk of CT side, please consider to set at server (recommended) side. Update terminal operation settings. Execute?

Cause

The location for saving attached data specifies CT, and it will be displayed when clicking the [Set] button.

Resolution

When this setting is correct, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCI-ERR001] Please enter application EXE name.

Cause

The EXE name of application is not entered.

Resolution

Please enter the EXE name of application.

[MGCI-ERR002] Please select a logon prohibition group.

Cause

The logon prohibition group is not selected.

Resolution

Please select the logon prohibition group.

[MGCI-ERR003] Please enter the list of EXE names of applications that allow printing.

Cause

The EXE name of printing permission application is not entered.

Resolution

Please enter the EXE name of printing permission application.

[MGCI-ERR004] Failed to update CT setting information. Cancel the processing.

Cause

An exception occurred in the network environment between Management Console and level control service.

Resolution

Please execute again after checking the network environment.

[MGCI-ERR005] Unable to save the settings, because the group that is added to level composition is not registered. Cancel the processing.

Cause

The group added to the level structure is not is not registered.

Resolution

Please register the group added to the level structure.

[MGCI-ERR006] The following characters are not allowed in application EXE name.
\, /, : , *, ?, ", <, >, | are not allowed.

Cause

The characters not allowed are entered in EXE name of application.

Resolution

Please enter characters that can be used in EXE name of application.

[MGCI-ERR007] Root directory cannot be modified.

Cause

Prepare to update the name or notes of root group.

Resolution

[MGCI-ERR008] Please enter a group name or CT name.

Cause

Prepare to update when the group or CT name is empty.

Resolution

Please enter characters excluding the blank.

[MGCI-ERR009] Please enter a process EXE name.

Cause

[EXE Name of Process] is not entered.

Resolution

Please enter [EXE Name of Process].

[MGCI-ERR010] Please select the option of record operation.

Cause

[Option of Record Operation] is not selected.

Resolution

Please select [Option of Record Operation].

[MGCI-ERR011] Please select the option that is based on extension.

Cause

[Option Based on Extension] is not selected.

Resolution

Please select [Option Based on Extension].

[MGCI-ERR012] The following characters are not allowed in a process EXE name.
\, /, :, *, ?, ", <, >, | are not allowed.

Cause

The characters not allowed are entered in [EXE Name of Process] (\, /, :, *, ?, ", <, >, |).

Resolution

Please enter characters that can be used in [EXE Name of Process].

[MGCI-ERR013] Please enter an extension name.

Cause

[Extension] is not entered.

Resolution

Please enter [Extension].

[MGCI-ERR014] The following characters are not allowed in an extension.
\, /, :, *, ?, ", <, >, |, are not allowed.

Cause

The characters not allowed are entered in [Extension] (\, /, :, *, ?, “, <, >, |, .).

Resolution

Please enter characters that can be used in [Extension].

[MGCI-ERR015] Unable to register over %d items in process EXE name.

Variable Information

%d : EXE items of process that can be registered

Cause

The items to be registered have exceeded the items that can be registered.

Resolution

Please newly register after deleting the registered and unnecessary information.

[MGCI-ERR016] After set the file operation record of this process to "Get All", it will cause significant impact on the system, so it cannot be set.

Cause

When [Option of Record Operation] cannot be set to [Get All], it will be displayed if EXE name of process is set to [Get All].

Resolution

Please enter other values in [Option of Record Operation].

[MGCI-ERR017] The process EXE name whose value of whether can be deleted is "No" cannot be deleted.

Cause

Prepare to delete the EXE name of process that cannot be deleted.

Resolution

Please do not delete the process whose [Whether to be Deleted] is set to [No].

[MGCI-ERR018] Unable to register over %d items in extension.

Variable Information

%d : name items of extension that can be registered

Cause

The items to be registered have exceeded the maximum item that can be registered.

Resolution

Please newly register after deleting the registered and unnecessary information.

[MGCI-ERR019] Double-byte characters are not allowed in process EXE name.

Cause

The double-byte characters are entered in [EXE Name of Process].

Resolution

Please enter characters that can be used in [EXE Name of Process].

[MGCI-ERR020] Please specify the following extensions in a process EXE name. .com .exe .bin

Cause

The extension of EXE name of process entered in [EXE Name of Process] is name excluding “.com”, “.exe” or “.bin”.

Resolution

Please specify “.com”, “.exe” or “.bin” as extension of EXE name of process entered in [EXE Name of Process].

[MGCI-ERR021] Double-byte characters are not allowed in extensions.

Cause

The double-byte characters are entered in [Extension].

Resolution

Please enter characters that can be used in [Extension].

[MGCI-ERR022] The extension whose value of whether can be deleted is "No" cannot be deleted.

Cause

Prepare to delete the extension that cannot be deleted.

Resolution

[MGCI-ERR023] Unable to register over %d items in application name that allows printing.

Variable Information

%d : items of printing permission application that can be registered

Cause

The registered items of application that can be printed in each policy setting window have exceeded the maximum item that can be registered.

Resolution

Please do not exceed the maximum registration number.

[MGCI-ERR024] Unable to register over %d items in application name of startup prohibition.

Variable Information

%d : items of startup prohibition application that can be registered

Cause

The registered items of startup prohibition application in each policy setting window have exceeded the maximum item that can be registered.

Resolution

Please do not exceed the maximum registration number.

[MGCI-ERR025] Please select the applicable range of update.

Cause

The update of applied range is not selected.

Resolution

Please select between [Only Apply Policy in This CT Group] or [Also Apply in This CT Group and Its Subordinate CT Group].

[MGCI-ERR026] Unable to update the policy of specified server.

Cause

When the group tree displays server, it will be displayed if the terminal information of server to be updated is selected.

Resolution

Information update for server cannot be performed.

[MGCI-ERR027] Please enter the process EXE name and keyword.

Cause

EXE name of process and keyword are not entered.

Resolution

Please enter EXE name of process and keyword.

[MGCI-ERR028] Unable to register over %d items in filtering condition.

Variable Information

%d : items of filter condition that can be registered

Cause

The registration items of filter condition have exceeded the maximum item that can be registered.

Resolution

Please do not exceed the maximum registration number.

[MGCI-ERR029] Unable to add because same conditions exist in the combination of "Process EXE Name" and "Keyword".

Cause

The same condition exists in the combination of EXE name of process and keyword.

Resolution

Please do not repeat the combination of EXE name of process and keyword.

[MGCI-ERR030] Unable to update before clicking the update button and when the input content is not modified.

Cause

The update contents have no changes.

Resolution

[MGCI-ERR031] Unable to register over %d items in the list of screen capture targets.

Variable Information

%d : items of screen capture that can be registered

Cause

The registration items in window title obtaining log and screen capture target list have exceeded the maximum registration item.

Resolution

Please do not exceed the maximum registration number.

[MGCI-ERR032] Non-numerals are not allowed in period for use.

Cause

The characters excluding the numerals are entered in [Period for Use].

Resolution

Please enter numerals in [Period for Use].

[MGCI-ERR033] The period for use is incorrect.

Cause

The value excluding year from 2000 to 2037, month from 1 to12 and day from 1 to12 is entered in [Period for Use].

Resolution

Please correctly enter a value of [Period for Use].

[MGCI-ERR034] The period for use is incorrect. Please enter start date <= end date.

Cause

The start date entered in [Period for Use]> end date.

Resolution

In [Period for Use], please enter according to the start date ≦end date.

[MGCI-ERR035] Non-numerals are not allowed in time for use.

Cause

The characters excluding numerals are entered in [Using Time].

Resolution

Please enter numerical value in [Using Time].

[MGCI-ERR036] The time for use is incorrect.

Cause

The value excluding hour from 2 to 23, minute from 0 to 59 is entered in [Using Time].

Resolution

Please correctly enter a value of [Using Time].

[MGCI-ERR037] The time for use is incorrect. Please enter start time <= end time.

Cause

The start time entered in [Using Time] > end time.

Resolution

For [Using Time], please enter according to start time ≦ end time.

[MGCI-ERR038] The following characters are not allowed in an extension.
\, /, :, ?, ", <, >, |, are not allowed.

Cause

The characters not allowed are entered in [Extension] (\, /, :, ?, “, <, >, |, .).

Resolution

Please enter characters that can be used in [Extension].

[MGCI-ERR039] Wild card (*) can only be specified at the beginnning or the end of extension.

Cause

The wildcard character (*) is entered in the place excluding the beginning or end of [Extension].

Resolution

Please correctly enter [Extension].

[MGCI-ERR040] Non-numerals are not allowed in start time of sending.

Cause

The characters excluding numerals are entered in [Time of Start Sending] of other setting tab.

Resolution

Please enter numerals in [Time of Starting Sending].

[MGCI-ERR041] The start time of sending is incorrect.

Cause

The value excluding hour from 0 to 23 and minute from 0 to 59 is entered in [Time of Start Sending] of other setting tab.

Resolution

Please correctly enter [Time of Starting Sending].

[MGCI-ERR042] Please enter the number of days available for decryption.

Cause

The value of days that can be decrypted is not entered.

Resolution

Please enter a value of days that can be decrypted.

[MGCI-ERR043] The number of days available for decryption is incorrect. Please enter within 1~999.

Cause

The input value of days that can be decrypted has exceeded the range from 1 to999.

Resolution

Please correctly enter a value of days that can be decrypted.

[MGCI-ERR044] Please enter the warning number of pages.

Cause

The warning pages are not entered.

Resolution

Please enter the warning pages.

[MGCI-ERR045] The warning number of pages is incorrect. Please enter within 1~999999.

Cause

The input warning pages have exceeded the range from 1 to 999999.

Resolution

Please correctly enter the warning pages.

[MGCI-ERR046] Please enter the number of pages for printing prohibition.

Cause

The prohibited printing pages are not entered.

Resolution

Please enter the prohibited printing pages.

[MGCI-ERR047] The number of pages for printing prohibition is incorrect. Please enter within 1~999999.

Cause

The input prohibited printing pages have exceeded the range from 1 to 999999.

Resolution

Please correctly enter the prohibited printing pages.

[MGCI-ERR048] The number of pages for printing prohibition is less than the warning number of pages. Please enter a number of pages for printing prohibition that is larger than the warning number of pages.

Cause

The input prohibited printing pages are less than the warning pages.

Resolution

Please enter a value more than warning pages in the prohibited printing pages.

[MGCI-ERR049] Please enter the URL string.

Cause

The URL string is not entered.

Resolution

Please enter URL string.

[MGCI-ERR050] Characters apart from the following are not allowed in URL strings.
Characters that are not single-byte alphanumeric characters, as well as ', ., -, ), (, _, : , /, %, + are not allowed.

Cause

The characters not allowed are used in URL character.

Resolution

Please use characters that can be used.

[MGCI-ERR051] Unable to register over %d items in sites with access prohibition.

Cause

100 items of website that can be accessed are required to be registered.

Resolution

Please register again after deleting the unnecessary websites that can be accessed.

[MGCI-ERR052] Please enter the IP address.

Cause

The IP address is not entered.

Resolution

Please enter the IP address.

[MGCI-ERR053] The entered IP address is incorrect. Please enter a correct address.

Cause

The format of IP address is incorrect.
It should be the format of “nnn.nnn.nnn.nnn” (n is a numeral), and the previous 0 can be omitted.

Resolution

Please enter IP address in correct format.

[MGCI-ERR056] Unable to register over 100 items in the server with connection permission.

Cause

Prepare to register more than 100 items of servers that can be connected.

Resolution

Please register again after deleting the unnecessary websites that can be connected.

[MGCI-ERR057] Unable to register over 100 items in the sites that allow uploading and downloading.

Cause

Prepare to register more than 100 items of websites that can be downloaded.

Resolution

Please register again after deleting the unnecessary websites that can be downloaded.

[MGCI-ERR058] Please enter the folder name.

Cause

The folder name is not entered.

Resolution

Please enter a folder name.

[MGCI-ERR059] The following characters are not allowed in folder name.
:, *, ?, ", <, >, |.

Cause

The characters not allowed are used in folder name.

Resolution

Please use characters that can be used.

[MGCI-ERR060] Please enter the folder name with the format that contains drive name.

Cause

The input folder name does not contain drive name.

Resolution

Please enter the folder name that contains drive name.

[MGCI-ERR061] The length of folder name has exceeded 254 bytes. The excess part will be deleted.

Cause

The full path of selected folder name has exceeded 254 bytes.

Resolution

In the folder name, the specified full path can only be within 254 bytes. The selected folder cannot be selected as the exclusion folder of getting file operation log.

[MGCI-ERR062] Unable to register over 100 items in excluded folder.

Cause

Prepare to register more than 100 items of arbitrary exclusion folders.

Resolution

Please register again after deleting the unnecessary and arbitrary exclusion folder.

[MGCI-ERR063] Please enter the domain name.

Cause

The domain name is not entered.

Resolution

Please enter a domain name.

[MGCI-ERR064] Characters apart from the following are not allowed in domain name.
Characters that are not single-byte alphanumeric characters as well as ., -, _ are not allowed.

Cause

The characters not allowed are used in domain name.

Resolution

Please use characters that can be used.

[MGCI-ERR065] Unable to register over 100 items in exclusion domain.

Cause

Prepare to register more than 100 items of exclusion domain.

Resolution

Please register again after deleting unnecessary exclusion domain.

[MGCI-ERR067] Characters apart from the following are not allowed in URL strings.
Characters that are not single-byte alphanumeric characters as well as ', ., -, ), (, _, : , %, + are not allowed.

Cause

The characters not allowed are used in URL string.

Resolution

Please use characters that can be used.

[MGCI-ERR068] Non-numerals are not allowed in the number of days in the period for use.

Cause

The value excluding numerals is entered in the value of period for use.

Resolution

Please enter a value in the value of period for use.

[MGCI-ERR069] Non-numerals are not allowed in the number of days it can be used.

Cause

The value excluding numerals is entered in the days that can be used.

Resolution

Please enter a value in the days that can be used.

[MGCI-ERR070] The setting of period is incorrect. Please set the action during USB individual identification >= action of CT.

Cause

This will be displayed when the value of days set in USB individual identification operation is less than that set in CT operation.

Resolution

Please fill according to operation of USB individual identification ≧CT operation.

[MGCI-ERR071] The required input does not exist. Please select the number from 1 to 999 to enter.

Cause

This will be displayed under the following three conditions:

It is not entered;
The value excluding the range is entered;
The characters excluding the numerals are entered.

Resolution

Please enter a value between 1 and 999.

[MGCI-ERR072] Please enter the folder name in UNC format that contains shared name.

Cause

The folder path excluding UNC format is entered in the allowed network folder name.

Resolution

Please enter the folder path in UNC format in the allowed network folder name.

[MGCI-INF001] Update settings to server (DB).

Cause

The setting contents can be reflected to server (DB).

Resolution

Please click the [OK] button.

[MGCI-SEL001] Update settings of level composition to server (DB).Execute?

Cause

The setting information of server is modified.

Resolution

[MGCI-SEL002] After the settings are updated to server (DB) immediately, they will be reflected to CT. Execute?

Cause

The setting information of server is modified.

Resolution

After the policy set in Management Console is updated and connected to Master Management Server or Management Server, please determine whether it can be reflected to CT of target.

[MGCI-SEL003] After the settings are updated to server (DB), they will be reflected at next startup of CT. Execute?

Cause

The setting contents are modified.

Resolution

After the policy set in Management Console is updated and connected to Master Management Server or Management Server, please determine whether the updated contents can be reflected to CT of target.

[MGCI-SEL004] After the settings are set to server (DB), they will be reflected to target CT. Please select to apply the set policy to selected CT group only, or apply to domain CT of subordinate sub-group as well. CT Group Name: %s

Variable Information

%s : CT group name

Cause

Prepare to immediately update the selected CT group, its subgroup and CT policy information.

Resolution

When updating the policy information of selected CT group only, please click the [OK] button after selecting [Apply Policy to This CT Group Only]. When updating the policy information of selected CT group, its subgroup and CT, please click the [OK] button after selecting [Apply Policy to This CT Group and Its Subordinate Group and CT]. When stopping the processing, please click the [Cancel] button.

[MGCI-SEL005] After the settings are set to server (DB), they will be reflected to target CT. Please select to apply the set policy to selected CT group only, or apply to domain CT of subordinate sub-group as well.
CT Group Name: %s

Variable Information

%s : CT group name

Cause

Prepare to update the selected CT group, its subgroup and CT policy information at next startup.

Resolution

[MGCI-SEL006] After the settings are updated to server (DB) immediately, they will be reflected to CT. Execute?
CT Name: %s

Variable Information

%s : CT name

Cause

Prepare to immediately update the policy information of selected CT.

Resolution

When updating, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCI-SEL007] After the settings are updated to server (DB), they will be reflected at next startup of CT. Execute?
CT Name: %s

Variable Information

%s : CT name

Cause

The selected CT is prepared to update the get policy information at next startup.

Resolution

When updating, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCI-SEL009] When importing the configuration information of Systemwalker Desktop Patrol, please use the Systemwalker Desktop Patrol configuration information import command. After importing configuration information through this menu, the registered group will be deleted, and the group policy and department administrator need to be set again.
Import configuration Information?

Cause

This will be displayed before importing configuration information from Systemwalker Desktop Patrol.

Resolution

Please determine whether to import by Systemwalker Desktop Patrol configuration information import command. When it is OK for only one time, please click the [OK] button. When the import is performed by Systemwalker Desktop Patrol configuration information import command, please click the [Cancel] button. Generally, please operate by Systemwalker Desktop Patrol configuration information import command.

[MGCI-SEL010] After the settings have been updated to server (DB), the Policy Application Tool creation window will be displayed. Execute?
CT Name: %1

Variable Information

%1: CT name

Cause

It is the confirming message when starting policy application tool.

Resolution

When starting the policy application tool, please click the [OK] button. When it is not started, please click the [Cancel] button.

[MGCL-ERR001] Failed to communicate with level control service. Cancel the processing.
The service of Management Server may have already stopped.
Please confirm.
The communication port number of Management Server and Management Console may be inconsistent.

Cause

This could be caused because:

The level control service of connected target server has stopped;
The IP address settings of connected target server are incorrect;
An exception occurred in the network environment;
Under the 3-level structure, when the structure reflection processing is performed from connecting the Management Console of Master Management Server to lower level Management Server, the update processing needs much more time.
As the Management Console is newly installed on the Management Server whose version is upgraded, the port number does not match.
The communication port of level control service (communication target) used for connecting server is not allowed by the firewall connected to server.

Resolution

Please execute again after checking the status and network environment of level control service of connected target server.

When the IP address of connected target server is incorrect, please overwrite the installation or reinstall the Management Console, and specify the correct IP address.

When it takes too much time for update processing, please refresh later and confirm whether the update processing is completed.

When the port number does not match, please process as one of the follows:

Overwrite the installation of Management Console and specify the correct port number.
Modify the port number of the Management Server through the server settings tool.

Please modify the settings of firewall so that the communication port of level control service used for connecting server can communicate with Management Console.

[MGCL-ERR002] Internal error occurred in level control service. Cancel the processing.

Cause

The system environment or database of level control service is not complete.

Resolution

Please contact Fujitsu technical staff.

[MGCL-INF001] The updating process has ended normally.

Cause

Resolution

[MGCL-SEL001] Copy policy. Reflect the copied content to target CT immediately after copying? To copy policy and reflect immediately, please click the [Yes] button. To copy policy only, please click the [No] button. To cancel the copying, please click the [Cancel] button.

Cause

Prepare to copy the policy.

Resolution

When copying the policy, and the contents are immediately reflected to client, please click the [Yes] button. When

only copying the policy, please click the [No] button. When the copying is finished, please click the [Cancel] button.

[MGCL-SEL003] Delete the selected CT group Execute?
CT Group Name: %s

Variable Information

%s : CT group name

Cause

Prepare to delete the CT group.

Resolution

When deleting, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCL-SEL004] Delete the selected %d sets of CT. Execute?
CT Name: %s

Variable Information

%d : selected number of sets of CT

%s : selected CT name

Cause

Prepare to delete CT.

Resolution

When deleting, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCM-ERR001] The data to be controlled is not set.

Cause

The control data is not set.

Resolution

Please set the control data.

[MGCM-ERR002] Required memory cannot be ensured. Close Management Console.

Cause

The memory is insufficient.

Resolution

Please execute again after ending the unnecessary application.

[MGCM-ERR003] Unable to execute this processing because communication with Management Server is not performed.
The service of Management Server may have already stopped. Please confirm.

Cause

Failed to connect to the level control service when recording the operation history. This could be caused because:

The level control service of connected target server has been stopped.
An exception occurred in the network environment.

Resolution

Please perform the same operation after confirming the connection status of network, and the startup status of level control service of the Management Server.

[MGCM-INF001] Unable to perform this processing because immediate update is being performed.

Cause

Prepare to update immediately again in immediate update processing.

Resolution

Please perform the immediate update processing again after immediate update processing. After immediate update processing is finished, the information to prompt end will be displayed.

[MGCM-INF002] Immediate update has ended. (%2 items in %1 have been updated immediately)

Variable Information

%1 : items of CT with successful update

%2 : items of target CT with immediate update

Cause

The setting contents are reflected to server (DB).
In addition, when performing the immediate update, items of target CT and items of CT whose immediate update is finished can be displayed.

Resolution

[MGCM-INF003] Unable to perform this processing because search of CT/CT group is being performed.

Cause

Prepare to perform the processing in the main window in the course of CT/CT group searching processing.

Resolution

Please click the [OK] button.

[MGCM-INF005] Connect to Sub-Level Management Server. Because the management of user information is set to "Manage collectively in Master Management Server", the information relating the user registered through this connection will be changed temporarily and overwritten by data synchronization process of Master Management Server. Continue?

Cause

Under the 3-level system structure, the management of user information is set to “Collectively Manage on the Master Management Server”, it will be displayed when connecting to the lower level Management Server.

Resolution

When registering user information, user group information, user policy information and department administrator information of user group, please connect to the Master Management Server. Please continue when performing other operations.

[MGCP-ERR001] Failed to control the process. Cancel the processing.

Cause

An exception occurred in the network environment of Management Console and level control service.

Resolution

Please execute again after checking the network environment.

[MGCP-INF001] Process control has ended normally.

Cause

Resolution

[MGCP-SEL001] Execute process control. Execute?

Cause

Execute the process control.

Resolution

Please confirm whether to execute.

[MGCP-SEL002] Get process list. Execute?

Cause

Prepare to get the process list.

Resolution

Please determine whether to get.

[MGCP-SEL003] Stop the specified process. In addition, when there are multiple specified process name, all of them will be stopped.

Cause

Prepare to stop the process.

Resolution

When stopping, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGCS-ERR001] Please select a configuration value.

Cause

The configuration value is not selected.

Resolution

Please select the configuration value.

[MGCS-ERR002] Failed to control the service. Cancel the processing.

Cause

The target CT does not exist. Or an exception occurred in the network environment of Management Console and level control service.

Resolution

Please execute again after checking the network environment.

[MGCS-INF001] Service control has ended normally.

Cause

Resolution

[MGCS-SEL001] Execute service control. Execute?

Cause

Execute the services control.

Resolution

Please confirm whether to execute.

[MGCS-SEL002] Get service list. Execute?

Cause

Prepare to get the service list.

Resolution

Please determine whether to get.

[MGCW-ERR001] Please enter an export file.

Cause

The output file name is not entered in window specified by each CSV export file.

Resolution

Please enter the output file name.

[MGCW-ERR002] Over %d single-byte characters cannot be entered in the export file.

Variable Information

%d : the specified scope of character number of output file

Cause

In the window specified by each CSV export file, the output file name cannot exceed 218 bytes.

Resolution

Please enter the output file name within 218 bytes.

[MGCW-ERR003] Please enter the export file in the format that contains drive name, path name and file name.

Cause

In the window specified by each CSV output file, the input format of output file is incorrect.

Resolution

Please correctly enter the drive name, path name and file name.

[MGCW-ERR004] The following character are not allowed in the path name and file name of export file.
\, /, :, *, ?, ", <, >, | are not allowed.

Cause

In the window specified by each CSV output file, the characters that cannot be used in output file name are used.

Resolution

Please use characters that can be used.

[MGCW-ERR005] Failed to open the file.
%s

Variable Information

%s : name of file failed to be opened

Cause

Failed to open the CSV file. [Preparation of device is not finished], [Access is refused], [Writing to this media is prohibited] or [Specified path cannot be found] is displayed in the window (%s of above mentioned message).

Resolution

Please confirm the following status: whether the device is connected to the disk, whether prepare to write data to the disk that sets file export prohibition, whether the writing is prohibited (the media is in write protected status, or the file is read-only), and whether the specified path exists.

[MGCW-ERR006] Failed to write the file.
%s

Cause

Insufficient disk capacity leads to fail to write CSV file.

Resolution

Please confirm whether the free space of disk is sufficient.

[MGCW-ERR007] The following character are not allowed in the path name and file name of export file.
\, :, *, ?, ", <, >, | are not allowed.

Cause

The characters not allowed are used in the output file name of window specified by output file.

Resolution

Please use characters that can be used.

[MGCW-ERR008] The specified export file already exists. Unable to continue processing.

Cause

The specified file has already existed in the window specified by output file.

Resolution

Please specify the file that does not exist.

[MGCW-ERR009] The path name or file name of import file does not exist. Please confirm if the specified path is correct.

Cause

The import file that does not exist is specified.

Resolution

Please execute again after confirming whether the specified path is correct.

[MGCW-ERR010] The path name of result log file does not exist. Please confirm if the specified path is correct.

Cause

The result log file that does not exist is specified.

Resolution

Please execute again after confirming whether the specified path is correct.

[MGCW-ERR011] Failed to open the result log file. Please confirm if the specified path is correct.

Cause

Failed to open the result log file.

Resolution

Please execute again after confirming whether the specified path is correct.

[MGCW-ERR012] Failed to open configuration information file. Please confirm if the specified path is correct.

Cause

Failed to open the configuration information file.

Resolution

Please execute again after confirming whether the specified path is correct.

[MGCW-ERR013] Please enter an import file.

Cause

The [Import File] is not entered in CSV input of department administrator.

Resolution

Please enter [Import File].

[MGCW-ERR015] Please enter the import file in the format that contains drive name, path name and file name.

Cause

In CSV input of department administrator, the drive name, path name and file name of [Import File] are incorrect.

Resolution

Please enter in the format containing drive name, path name and file name in [Import File].

[MGCW-ERR016] The following character are not allowed in the path name and file name of import file.
\, /, :, *, ?, ", <, >, | are not allowed.

Cause

The characters that cannot be used in file name are entered.

Resolution

Please use characters that can be used in file name.

[MGCW-ERR017] Please enter the result log file.

Cause

[Result Log File] is not entered in the CSV input and output of department administrator.

Resolution

Please enter [Result Log File].

[MGCW-ERR019] Please enter the result log file in the format that contains drive name, path name and file name.

Cause

In CSV input and output of department administrator, the drive name, path name and file name of [Result Log File] are incorrect.

Resolution

Please enter the result log file in the format containing drive name, path name and file name.

[MGCW-ERR020] The following character are not allowed in the path name and file name of result log file.
\, /, :, *, ?, ", <, >, | are not al

Cause

The characters not allowed are entered in file name.

Resolution

Please enter characters that can be used in file name.

[MGCW-ERR021] Failed to open the import file. Please confirm if the specified path is correct.

Cause

Failed to open [Import File] in CSV input of department administrator.

Resolution

Please execute again after confirming whether the specified path is correct.

[MGCW-ERR022] Failed to open the export file. Please confirm if the specified path is correct.

Cause

Failed to open [Export File] in CSV output of department administrator.

Resolution

Please confirm the following status:

Whether the device is connected to the disk.
Whether prepare to write data to disk that set file export prohibition.
Whether the writing is prohibited (the media is in write protected status, or the file is read-only).
Whether the specified path exists.

[MGCW-INF001] Export CT information.

Cause

CSV file output of CT information is ended normally.

Resolution

Please click the [OK] button.

[MGCW-INF002] Export user information.

Cause

CSV file output of user information is ended normally.

Resolution

Please click the [OK] button.

[MGCW-INF003] Composition has been exported.

Cause

CSV file output of configuration information is ended normally.

Resolution

Please click the [OK] button.

[MGCW-INF004] The department administrator of CT group has been exported in CSV format.

Cause

The department administrator CSV output of CT group is finished.

Resolution

Please click the [OK] button.

[MGCW-INF005] The department administrator of user group has been exported in CSV format.

Cause

The department administrator CSV output of user group is finished.

Resolution

Please click the [OK] button.

[MGCW-INF006] The USB device information file has been exported.

Cause

The USB device information file output is finished.

Resolution

Please click the [OK] button.

[MGCW-INF007] IP address file of subordinate CT has already been exported.

Cause

The IP address file output of subordinate CT is finished.

Resolution

Please click the [OK] button.

[MGCW-INF008] CT group information has been exported to CSV file.

Cause

The CSV file output of CT group information is finished.

Resolution

Please click the [OK] button.

[MGCW-SEL001] %s already exists. Overwrite?

Variable Information

%s : existed CSV output file name

Cause

The specified output file has existed in the window specified by each CSV output file.

Resolution

When overwriting, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGFW-ERR001] Failed to update level composition. Cancel the processing.

Cause

The service is not normally operating. Or an exception occurred in the network environment of Management Console and level control service.

Resolution

Please execute again after checking the network environment.

[MGFW-ERR002] Failed to update debugging trace switch. Cancel the processing.

Cause

The service is not normally operating. Or an exception occurred in the network environment of Management Console and level control service.

Resolution

Please execute again after checking the network environment.

[MGFW-ERR003] A group or multiple CTs have been selected. Please select a single CT.

Cause

Select the group, or select several CTs.

Resolution

Please select one CT.

[MGFW-ERR004] CT is not selected.

Cause

The CT is not selected.

Resolution

Please select CT.

[MGFW-ERR005] Group or CT is not selected.

Cause

The group or CT is not selected.

Resolution

Please select the group or CT.

[MGFW-ERR006] The specified manual saving path is not found.

Cause

The specified saving path of manual cannot be found.

Resolution

Please contact Fujitsu technical staff.

[MGFW-ERR007] The target data of composition reflection does not exist. To perform policy setting, please select [Refresh Tree] from the [Tree Settings] menu to get the latest CT group tree information.

Cause

The target data reflected by structure does not exist.

Resolution

Select [Refresh Tree] from the [Tree Settings] menu to get the newest CT group tree information.

[MGFW-ERR008] Failed to communicate with the target CT. IP address [999.999.999.999]

Cause

Failed to collect the remote data. This could be caused because:

The target CT is not powered.
The service of target CT has stopped.
An exception occurred in the network environment.

Resolution

Please execute again after confirming the status of target CT and network.

[MGFW-INF001] Unable to end because immediate update is being performed.

Cause

When performing the immediate update processing, prepare to end the program.

Resolution

Please end the Management Console after ending the immediate update processing. The message to prompt ending will be displayed after the immediate update processing is finished.

[MGFW-INF002] The composition has been changed. Please execute [Reflect CT group composition] or [Reflect User Group Structure] through menu or tree column after the all changes of composition have been registered.

Cause

The modified contents exist in the settings of CT group tree or user group tree.

Resolution

For reflecting the modified setting contents, please perform [Updating Configuration of CT Group] or [Updating Configuration of User Group].

[MGFW-INF003] The request of collecting material for trouble investigation has been performed.

Cause

This will be displayed after collecting the remote data.

Resolution

Please click the [OK] button.

[MGFW-INF004] Trace log collection request for CT has been performed.

Cause

If the CT debugging trace is set to [Summary] or [Details], it will be displayed when the entrust is normally executed for CT.

Resolution

Please click the [OK] button.

[MGFW-INF005] Trace log removal request for CT has been performed.

Cause

If the CT debugging trace is set to [No], it will be displayed when the entrust is normally executed for CT.

Resolution

Please click the [OK] button.

[MGFW-SEL001] Update settings of level composition to server (DB). Execute?

Cause

The setting contents of level structure are modified.

Resolution

Please determine whether to update.

[MGFW-SEL002] Data that is not updated exists. Abort the modified content?

Cause

The data that is not updated exists.

Resolution

Please determine whether to execute.

[MGFW-SEL003] Update level composition to the latest status. Execute?

Cause

Prepare to refresh.

Resolution

Please determine whether to refresh.

[MGFW-SEL004] Obtain trace logs. Execute?

Cause

Prepare to get the trace log.

Resolution

Please select whether to get.

[MGFW-SEL006] Composition is not updated. Execute?

Cause

The level structure is modified, but the [User Policy Settings] window shall be closed when the status is not reflected.

Resolution

When directly closing, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGFW-SEL007] Perform the request of collecting material for trouble investigation. Execute?

Cause

It is the confirming message before collecting the remote data.

Resolution

When collecting the remote data, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGFW-SEL008] Perform trace log collection request for CT. Execute?

Cause

Prepare to set the CT debugging trace as [Summary] or [Details].

Resolution

When collecting the CT debugging trace log, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGFW-SEL009] Perform trace log removal request for CT. Execute?

Cause

Prepare to set the CT debugging trace as [No].

Resolution

When the CT debugging trace log is not collected, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGFW-SEL010] Update the level composition of selected server to the latest status. Execute?
Server Name: %s

Variable Information

%s : server name of target

Cause

Prepare to refresh the level structure of displayed server.

Resolution

When it is required to refresh the level structure of displayed server, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGLC-ERR002] The management servers are different, moving is not performed. Name: %s

Variable Information

%s : Name of CT failed to be moved

Cause

Prepare to move the CT to server group that is different from server where CT registers.

Resolution

Please move to the server group that is logged on.

[MGLC-ERR003] The level cannot exceed 100 levels. Cancel the processing.

Cause

Prepare to specify the level more than 100 levels.

Resolution

Please change the level to less than 100 levels.

[MGLC-ERR005] CT group or CT cannot be moved to root directory. Name: %s

Variable Information

%s : name of CT or CT group before movement

Cause

When displaying the server or Active Directory Linkage, prepare to move the CT group or CT to the root directory.

Resolution

[MGLC-ERR007] Unable to move to the domain or group created through linking with Active Directory.
Name: %s

Variable Information

%s : name of CT or CT group before movement

Cause

CT or CT group cannot be moved to the domain or CT group created in Active Directory Linkage.

Resolution

This operation cannot be performed. Please click the [OK] button.

[MGLC-ERR008] Unable to move because there is no authority in the moving target.
Name: %s

Variable Information

%s : name of CT or CT group before movement

Cause

When the department administrator performs the operation, the CT or CT group cannot be moved to CT group without authority

Resolution

This operation cannot be performed. Please click the [OK] button.

[MGLC-ERR009] Unable to move to server.
Name: %s

Variable Information

%s : name of CT or CT group before movement

Cause

When the domain linkage is performed, the CT or CT group cannot be moved to server.

Resolution

This operation cannot be performed. Please click the [OK] button.

[MGLC-ERR011] User group or user cannot be moved to root directory.

Cause

When Active Directory Linkage is performed, prepare to move the user group or user to the root directory.

Resolution

Please click the [OK] button. When Active Directory Linkage is performed, the user group or user cannot be moved to the root directory, so please move it to Local directory.

[MGLC-ERR012] CT group cannot be moved to unconfigured folder.
Name: %1

Variable Information

%1: CT group name

Cause

Prepare to drag and drop the CT group to unconfigured folder.

Resolution

CT group cannot be moved to unconfigured folder.

[MGLC-ERR013] CT cannot be moved to root directory. Please move to an unconfigured folder.
Name: %1

Variable Information

%1: CT name

Cause

Prepare to drag and drop CT to the root directory.

Resolution

CT cannot be moved to the root directory.

[MGLC-ERR014] CT cannot be moved to server. Please move to an unconfigured folder.
Name: %1

Variable Information

%1: CT name

Cause

Prepare to drag and drop CT to the server.

Resolution

CT cannot be moved to server.

[MGLC-ERR015] CT cannot be moved to Local. Please move to an unconfigured folder.
Name: %1

Cause

%1: CT name

Resolution

Prepare to drag and drop CT to Local.

[MGLD-ERR001] Please enter the user ID.

Cause

The user ID is not entered.

Resolution

Please enter the user ID.

[MGLD-ERR002] Please enter the password.

Cause

The password is not entered.

Resolution

Please enter the password.

[MGLD-ERR003] Failed to get information of connection target server. End..

Cause

The information of connected target server is not complete.

Resolution

Please execute again after confirming the information of corresponding servers.

[MGLD-ERR004] Authentication failed. Please confirm user ID or password.

Cause

Authentication failed.

Resolution

Please confirm the user ID and password.

[MGLD-ERR005] Failed to encrypt user ID and password. Cancel the processing.

Cause

The database environment is not complete.

Resolution

Please contact Fujitsu technical staff.

[MGLD-ERR008] Please select a connection server.

Cause

The connected target server is not selected in the authentication dialog box.

Resolution

Please select the target server name to be connected.

[MGLD-ERR009] The version of connection target server is different. Cancel the processing.

Cause

The version of product preparing to connect Master Management Server of Management Console is different.

Resolution

Please confirm the version of product to connect to the Management Server in the server settings tool and for the old version, please upgrade the version.

[MGSC-ERR001] Non-numeric characters and decimal points are not allowed in IP address.

Cause

The characters excluding the numerals and period are entered in IP address (searching conditions) of CT/CT group searching window.

Resolution

Please confirm the value entered in IP address.

[MGSC-ERR002] The input format of IP address is incorrect.

Cause

The IP address (searching conditions) in CT/CT group searching window is not entered in the format of XXX.XXX.XXX.XXX.

Resolution

Please confirm the value entered in IP address.

[MGSC-ERR003] The input format of MAC address is incorrect. 17 characters must be entered.

Cause

The MAC address (searching conditions) in CT/CT group searching window is not entered in the format of XX-XX-XX-XX-XX-XX.

Resolution

Please confirm the value entered in MAC address.

[MGSC-ERR004] Non-numeric characters and decimal points are not allowed in CT version.

Cause

In the CT/CT group searching window, the characters excluding numerals and period are entered in CT version (searching conditions).

Resolution

Please confirm the value entered in CT version.

[MGSC-ERR005] The input format of CT version is incorrect.

Cause

The CT version (searching conditions) in CT/CT group searching window is not entered in the format of X.X.X.X.

Resolution

Please confirm the value entered in CT version.

[MGSC-ERR006] Non-numeric characters are not allowed in Last Logon Date (Start).

Cause

The characters excluding numerals are entered in last logon day (searching conditions) in the CT/CT group searching window.

Resolution

Please confirm the value entered in last logon day (start).

[MGSC-ERR007] The input format of Last Logon Date (Start) is incorrect.

Cause

The last logon day (searching conditions) in the CT/CT group searching window is not entered in the format of mmddyyyy.

Resolution

Please confirm the value entered in last logon day (start).

[MGSC-ERR008] Non-numeric characters are not allowed in Last Logon Date (End).

Cause

The characters excluding numerals are entered in last logon end date (searching conditions) in CT/CT group searching window.

Resolution

Please confirm the value entered in last logon day (end).

[MGSC-ERR009] The input format of Last Logon Date (End) is incorrect.

Cause

The last logon day (searching conditions) in the CT/CT group searching window is not entered in the format of mmddyyyy.

Resolution

Please confirm the value entered in last logon day (end).

[MGSC-ERR010] Non-numeric characters are not allowed in Client Policy Update Date (Start).

Cause

The characters excluding numerals are entered in the start date (searching conditions) of updating client policy in the CT/CT group searching window.

Resolution

Please confirm the value entered in date (start) of updating client policy.

[MGSC-ERR011] The input format of Client Policy Update Date (Start) is incorrect.

Cause

The start date (searching conditions) of updating client policy in the CT/CT group searching window is not entered in the format of mmddyyyy.

Resolution

Please confirm the value entered in date (start) of updating client policy.

[MGSC-ERR012] Non-numeric characters are not allowed in Client Policy Update Date (End).

Cause

The characters excluding numerals are entered in the end date (searching conditions) of updating client policy in the CT/CT group searching window.

Resolution

Please confirm the value entered in date (end) of updating client policy.

[MGSC-ERR013] The input format of Client Policy Update Date (End) is incorrect.

Cause

The end date (searching conditions) of updating client policy in the CT/CT group searching window is not entered in the format of mmddyyyy.

Resolution

Please confirm the value entered in date (end) of updating client policy.

[MGSC-ERR014] Unable to search because the group as search location has been moved or deleted.

Cause

When clicking the search button in the CT/CT group searching window, the group of searching target has been moved or deleted.

Resolution

Please close the searching window first, and display the searching window again after selecting the group again.

[MGSC-ERR015] The entered value of Last Logon Date (Start) does not exist on calendar.

Cause

The date that does not exist is entered in last logon day (searching conditions) in the CT/CT group searching window.

Resolution

Please confirm the value entered in last logon day (start).

[MGSC-ERR016] The entered value of Last Logon Date (End) does not exist on calendar.

Cause

The date that does not exist is entered in last logon day (searching conditions) in the CT/CT group searching window.

Resolution

Please confirm the value entered in last logon day (end).

[MGSC-ERR017] The entered value of Client Policy Update Date (Start) does not exist on calendar.

Cause

The date that does not exist is entered in the date (searching conditions) of updating client policy in the CT/CT group searching window.

Resolution

Please confirm the value entered in the date (start) of updating client policy.

[MGSC-ERR018] The entered value of Client Policy Update Date (End) does not exist on calendar.

Cause

The date that does not exist is entered in the date (searching conditions) of updating client policy in the CT/CT group searching window.

Resolution

Please confirm the value entered in the date (end) of updating client policy.

[MGSC-ERR019] The Last Logon Date (Start) is later than the Last Logon Date (End). Please enter the Last Logon Date (Start) <= Last Logon Date (End).

Cause

In the value entered in CT/CT group searching window, the last logon start date > last logon end date.

Resolution

Please confirm the value entered in last logon day (start · end).

[MGSC-ERR020] The Client Policy Update Date (Start) is later than the Client Policy Update Date (End). Please enter the Client Policy Update Date (Start) <= Client Policy Update Date (End).

Cause

In the value entered in CT/CT group searching window, the start date of updating client policy > end date of updating client policy.

Resolution

Please confirm the value entered in date of updating client policy (start · end).

[MGSC-ERR021] Characters that are not hexadecimal numbers and hyphen are not allowed in MAC address.

Cause

The characters excluding hexadecimal values and hyphen are entered in MAC address.

Resolution

Please enter characters that can be used in MAC address.

[MGUD-ERR001] Please enter the device name.

Cause

The device name is not entered in USB device logon window.

Resolution

Please enter a device name.

[MGUD-ERR002] Characters not allowed are used in the device name. Control characters are not allowed.

Cause

In USB device logon window, the characters not allowed are used in device name.

Resolution

Please enter characters that can be used in device name.

[MGUD-ERR003] Please enter the internal serial number.

Cause

In USB device logon window, when the identification method is [Match Completely], the internal serial number is not entered.

Resolution

Please enter the internal serial number.

[MGUD-ERR004] Characters not allowed are used in the internal serial number. Control characters are not allowed.

Cause

In USB device logon window, the characters not allowed are used in the internal serial number.

Resolution

Please enter characters that can be used in internal serial number.

[MGUD-ERR005] Please enter the USB device name.

Cause

In USB device logon window, the USB device name is not entered.

Resolution

Please enter a USB device name.

[MGUD-ERR006] Characters not allowed are used in the USB device name. Control characters are not allowed.

Cause

In USB device logon window, the characters not allowed are used in the USB device name.

Resolution

Please enter characters that can be used in the USB device name.

[MGUD-ERR007] Characters not allowed are used in notes. Control characters are not allowed.

Cause

In USB device logon window, the characters not allowed are used in the notes.

Resolution

Please enter characters that can be used in the notes.

[MGUD-ERR008] The registered USB devices is more than 10,000 items, Unable to processing.

Cause

In the USB device registration window, the USB devices to be registered have exceeded 10,000 items.

Resolution

Please newly log on after deleting the unnecessary USB devices.

[MGUD-ERR009] The correspondent USB device has already been deleted.

Cause

In the USB device registration window, it will be displayed when preparing to delete the deleted USB devices.

Resolution

Please restart the USB device registration window, and confirm whether the corresponding USB devices have been deleted.

[MGUD-ERR010] Please enter the Manufacturer ID.

Cause

In the USB device registration window, the maker ID is not entered.

Resolution

Please enter a maker ID.

[MGUD-ERR011] Please enter the Manufacturer ID with four hexadecimal digits.

Cause

In the USB device logon window, the entered maker ID has exceeded the range from 0000 to FFFF.

Resolution

In the maker ID, please enter a value within a range from 0000 to FFFF.

[MGUD-ERR012] Please enter the Product ID.

Cause

In the USB device logon window, the product ID is not entered.

Resolution

Please enter a product ID.

[MGUD-ERR013] Please enter the Product ID with four hexadecimal digits.

Cause

In the USB device logon window, the entered product ID has exceeded the range from 0000 to FFFF.

Resolution

In the product ID, please enter a value within a range from 0000 to FFFF.

[MGUD-ERR014] The USB device has already been registered.

Cause

In the USB device logon window, prepare to update the prompted information of logged USB device.

Resolution

Please click the [Update] button when modifying the logon contents.

[MGUD-ERR015] Unable to obtain USB device information of the specified drive.
Please confirm if the drive name is correct or USB device is plugged out.

Cause

In the USB device logon window, when clicking the [Get USB Device Information] button, it is prompted that this information cannot be get. None of USB device is inserted into the USB terminal, or the inserted USB device cannot be identified in this system.

Resolution

Please confirm whether the USB device is inserted into the USB terminal.
When the inserted USB device in USB terminal cannot be identified by this system, please insert again.

[MGUD-ERR016] Unable to obtain USB device information of the specified drive. Please check if the USB device is identified correctly.

Cause

In the USB device logon window, when clicking the [Get USB Device Information] button, the information cannot be get. The device is not normally identified.

Resolution

Please execute again after this device is correctly identified by the system.

[MGUD-ERR017] The deleted USB device exists, the other USB devices have been deleted.

Cause

When deleting several USB devices, there are already deleted devices in USB device.

The USB device displayed in Management Console actually is deleted because:

The administrator who performs operations in the other Management Console has deleted this device.

Resolution

As this USB device has been deleted, it is not required to perform the processing.

[MGUD-ERR018] Deleted USB device exists, the valid period of other USB devices have been extended.

Cause

When the period for use of several USB devices are prolonged, there are already deleted devices in USB device.

The USB device displayed in Management Console actually is deleted because:

The administrator who performs operations in the other Management Console has deleted this device.

Resolution

As this USB device has been deleted, it is not required to perform the processing.

[MGUD-ERR019] Please enter the period for use.

Cause

[Period for Use] is not entered.

Resolution

Please enter [Period for Use]. Any of [Year], [Month] and [Day] is required to be filled.

[MGUD-ERR020] The period for use is incorrect. The period for use can be entered within the following range.
January 2000 to 31 December 2037

Cause

This will be displayed under the three following conditions.

The date before January, 1st, 2000 is entered;
The date after December, 31th, 2037 is entered;
The characters excluding numerals are entered.

Resolution

Please enter a date between January, 1st, 2000 and December, 31th, 2037.

[MGUD-ERR021] All the selected USB devices have been deleted.

Cause

When preparing to delete the USB device, the selected USB device has been deleted.

The USB device displayed in Management Console actually is deleted because:

The administrator who performs operations in the other Management Console has deleted this device.

Resolution

As this USB device has been deleted, it is not required to perform the processing.

[MGUD-INF001] It is the registered USB device. Display the registered content.

Cause

In the USB device logon window, it will be displayed when [Get USB Device Information] (clicking this button) is performed for logged-on USB.

Resolution

[MGUD-INF002] Registered device. Please remove the screening of USB device and confirm.

Cause

When adding device, the device has logged on master, but in the list display, as the small range display of USB is set, this device information is not displayed.

Resolution

Please add the device after removing the small range display of USB device.

[MGUD-SEL001] Delete USB device.
When deleting the USB device set in permitted device of policy, its setting information will be deleted as well.
Delete the USB device?

Cause

In the USB device logon window, it is the prompted information when preparing to delete USB device.

Resolution

When deleting, please click the [OK] button. When stopping the processing, please click the [Cancel] button.

[MGUI-ERR001] The following characters are not allowed in a user name.
\ / : * ? " < > | [ ] ; = , + are not allowed.

Cause

The characters not allowed are entered in [User Name] (\ / : * ? “ < > | [ ] ; = , +).

Resolution

In [User Name], please enter again with characters that can be used.

[MGUI-ERR002] Please enter a user name.

Cause

[User Name] is not entered.

Resolution

Please enter [User Name].

[MGUI-ERR003] User name cannot be entered with period only.

Cause

The character (only period) that cannot be used is entered in [User Name].

Resolution

In [User Name], please enter again with characters that can be used.

[MGUI-ERR004] Unknown error occurred. Please contact the system administrator.

Cause

Flaws exist in the system environment of Management Console.

Resolution

Please contact Fujitsu technical staff.

[MGUI-ERR005] Please enter an import file.

Cause

[Import File] is not entered.

Resolution

Please enter [Import File].

[MGUI-ERR006] Over %d single-byte characters cannot be entered in import file.

Variable Information

%d : the maximum character number of import file name

Cause

The length of [Import File] has exceeded the maximum character number that can be entered.

Resolution

Please cut the length of [Import File].

[MGUI-ERR007] Please enter the import file in the format that contains drive name, path name and file name.

Cause

When specifying [Import File], the drive name, path name or file name is incorrect.

Resolution

When specifying [Import File], please enter in the format containing drive name, path name and file name.

[MGUI-ERR008] The following character are not allowed in the path name and file name of import file.
\, /, :, *, ?, ", <, >, | are not allowed.

Cause

The characters that cannot be used for file name are entered.

Resolution

Please enter again with characters that can be used in the file name.

[MGUI-ERR009] Please enter the result log file.

Cause

[Result Log File] is not entered.

Resolution

Please enter [Result Log File].

[MGUI-ERR010] Over %d single-byte characters cannot be entered in result log file.

Variable Information

%d : the maximum character number of full path of result log file

Cause

When specifying [Result Log File], the full path length has exceeded the maximum character number that can be entered.

Resolution

Please cut the full path length of [Result Log File].

[MGUI-ERR011] Please enter the result log file in the format that contains drive name, path name and file name.

Cause

When specifying [Result Log File], the entered drive name, path name or file name is incorrect.

Resolution

When specifying [Result Log File], please enter in the format containing drive name, path name and file name.

[MGUI-ERR012] The following character are not allowed in the path name and file name of result log file.
\, /, :, *, ?, ", <, >, | are not allowed.

Cause

The characters that cannot be used for file name are entered.

Resolution

Please enter again with characters that can be used in the file name.

[MGUI-ERR013] Unable to register over %d items in user policy.

Variable Information

%d : the maximum logon number of user policy

Cause

The items to be logged-on have exceeded the maximum number that can be logged-on.

Resolution

Please newly register after deleting the logged-on and unnecessary information.

[MGUI-ERR014] The update value does not exist.

Cause

The user information is not entered (position, department name, department code, notes).

Resolution

Please enter an item of user information.

[MGUI-ERR015] The name of import file is the same as the name of result log file.

Cause

The import file and result log file are specified as files with same name.

Resolution

For import file name and result log file, please specify them as different names.

[MGUI-ERR016] The following character are not allowed in the path name and file name of result log file.
\, :, *, ?, ", <, >, | are not allowed.

Cause

The characters that cannot be used for file name are entered in execution log.

Resolution

Please enter again with characters that can be used in the file name.

[MGUI-ERR017] The following character are not allowed in the path name and file name of import file.
\, :, *, ?, ", <, >, | are not allowed.

Cause

The characters that cannot be used for file name are entered in import file.

Resolution

Please enter again with characters that can be used in the file name.

[MGUI-ERR018] The user name has already been registered.

Cause

The user name entered in the user information has registered.

Resolution

Please enter an IP that is different from the registered ID name.

[MGUI-ERR019] User name cannot be modified. Please create a new user.

Cause

The user name cannot be modified.

Resolution

Please create as a new user name.

[MGUI-ERR020] The names of export file and result log file are the same.

Cause

The export file and result log file are specified as file of same file name.

Resolution

For export file name and result log file, please specify them as different names.

[MGUI-ERR021] The length of import file name has exceeded 218 bytes. The excess part will be deleted.

Cause

The selected file path and total length of file name may be too long. Therefore, when performing the import processing, the part exceeding 218 bytes will be deleted.

Resolution

Please confirm the entered file name. Please specify the total length of selected folder file name within 218 bytes.

[MGUI-ERR022] The length of export file name has exceeded 218 bytes. The excess part will be deleted.

Cause

The selected file path and total length of file name may be too long. Therefore, when performing the import processing, the part exceeding 218 bytes will be deleted.

Resolution

Please confirm the entered file name. Please specify the total length of selected folder file name within 218 bytes.

[MGUI-ERR023] The length of result log file name has exceeded 218 bytes. The excess part will be deleted.

Cause

The selected file path and total length of file name may be too long. Therefore, when performing the import processing, the part exceeding 218 bytes will be deleted.

Resolution

Please confirm the entered file name. Please specify the total length of selected folder file name within 218 bytes.

[MGUI-SEL001] Update User Information (POST, organization, organization code, notes). Execute?

Cause

It is the update confirming information of user information.

Resolution

Please determine whether to update.

[MGUI-SEL002] Perform CSV import. Execute?

Cause

It is the confirmation information of CSV file import.

Resolution

Please determine whether to import.

[MGUI-SEL003] Update settings to server (DB) immediately. Execute?

Cause

Update confirmation.

Resolution

Please determine whether to update.

[MGUI-SEL005] Update User Information (Notes). Execute?

Cause

It is the information update confirmation of user information (notes).

Resolution

Please determine whether to update.

[MGUL-SEL002] Delete the selected %d user policies. Execute?

Variable Information

%d : number of selected user policies

Cause

It is the deletion confirmation of user policy.

Resolution

Please determine whether to delete.

[MGUP-INF002] Unable to perform this processing now, because the search of user/user group is being performed.

Cause

In the user/user group searching window, it is the prompted information when preparing to perform operation similar to modify the level status, or perform the operation of modifying the displayed contents. (Example: Refresh Display and Not Display Empty Group, etc.)

Resolution

Please perform this processing again after the searching is finished.

[MGUP-SEL002] Delete the selected user group Execute?
User Group Name:%s

Variable Information

%s : group name

Cause

Delete the user group.

Resolution

When deleting, please click the [OK] button. When stopping processing, please click the [Cancel] button.

[MGUP-SEL003] Copy policy. Execute?

Cause

It is required to copy policy for the other user.

Resolution

When copying policy, please click the [OK] button. When stopping processing, please click the [Cancel] button.

[MGUP-SEL005] Delete the selected %d items of users. Execute?
User Name:%2

Variable Information

%1 : number of users to be deleted

%2 : user name (separate by commas and display in parallel) to be deleted

Cause

It is required to delete the user.

Resolution

When deleting, please click the [OK] button. When stopping processing, please click the [Cancel] button.

[MGUP-SEL006] Add user. Execute?
User Name: %s

Variable Information

%s : user name to be added

Cause

Prepare to add the user.

Resolution

When adding, please click the [OK] button. When stopping processing, please click the [Cancel] button.

[MGSA-SEL001] Register department administrator. Execute?

Cause

Click the logon button in the confirmation window set by the department administrator of CT group, or the user group.

Resolution

When logging on, please click the [OK] button. When stopping processing, please click the [Cancel] button.

The size of configuration information file is incorrect.

Cause

The size of the configuration information file is incorrect. The configuration information file may be 0 bytes.

Resolution

Please confirm whether the configuration information file is normal.

Import Configuration Information

Cause

Resolution

Export Configuration Information.

Cause

Resolution

Unable to open temporary file.

Cause

Failed to open the temporary file.

Resolution

Please confirm the execution environment. (free space of disk, etc.)

Failed to create the file. [%d]

Variable Information

%d : detail error code

Cause

Failed to output the configuration information due to some causes.

Resolution

Please confirm the execution environment. (free space of disk, etc.)

Composition has been exported.

Cause

Resolution

[MGPD-ERR001] The number of selected USB devices has exceeded %d. Unable to processing.

Cause

In the selection window of allowed device, more than 30 USB devices have been logged on.

Resolution

Please delete the unnecessary USB devices and control the number of device to within 30 items.

[MGPD-INF001] Please confirm the setting of file access authority.
When performing the following settings, the USB device individual indentification function will be disabled in Explorer.
·When file access control is set to "No"
or
·When none of the drive type of prohibited drive or removable drive is selected

Cause

In [File Export Prohibition] Tab page window, the Explorer will not perform USB device individual identification and all USB devices are allowed to be used. At the moment, if the USB device individual identification function is to be set to valid, it can only be achieved by File Export Utility.

Resolution

If the Explorer also wants to achieve USB device individual identification, please reset the option of file access restriction in [File Export Prohibition] tab page window.

[MGPW-ERR001] Please enter the old password.

Cause

The original password is not entered in the password modifying window.

Resolution

Please enter the original password.

[MGPW-ERR002] Please enter the new password.

Cause

The new password is not entered in the password modifying window.

Resolution

Please enter the new password.

[MGPW-ERR003] Please enter the new password again.

Cause

The confirm password is not entered in the password modifying window.

Resolution

Please enter the confirm password.

[MGPW-ERR004] The entered passwords does not match. Please enter the same value.

Cause

In the password modifying window, the entered new password does not match the confirm password.

Resolution

Please correctly enter the new password and confirm password.

[MGPW-ERR005] The old password is incorrect. Please enter the correct password.

Cause

In the password modifying window, the entered original password is incorrect.

Resolution

Please enter the correct original password.

[MGPW-ERR006] The old password has been entered incorrectly three times. Close Management Console.

Cause

In the password modifying window, the original password is entered incorrectly three times.

Resolution

Please modify the password again after logging on to the Management Console again.

[MGPW-ERR007] Unable to authenticate because the old password has been changed. Close Management Console

Cause

After logging on the Management Console, prepare to modify the password in other terminals. The password cannot be modified.
In addition, as the authentication failed, the operation of the Management Console will be stopped.

Resolution

The original password has been modified and please confirm it with the administrator.

[MGPW-ERR008] The characters not allowed are used in the password. The following character are not allowed.
&, \, :, ?, ", ~, ^, ', <, >, |, double-byte and single-byte spaces are not allowed.

Cause

The entered password contains characters not allowed.

Resolution

Please enter the password containing allowed characters.

[MGPW-ERR009] Your logon ID may have already been deleted from DB or the authority has been modified.
Close Management Console.

Cause

The user ID for the present use has been deleted.

Resolution

Please confirm the user ID and access authority with the administrator.

[MGPW-SEL001] Change Password. Execute?

Cause

It is the confirmation information when modifying the password.

Resolution

When modifying the password, please click the [OK] button. When stopping the processing, please click the [Cancel] button.