Cause
The user ID has not been entered.
Resolution
Please enter the user ID.
Cause
The password has not been entered.
Resolution
Please enter the password.
Cause
The user ID or password error.
Resolution
Please enter the correct user ID and password.
Cause
Message appears when the authentication failed for more than three times.
Resolution
Please start the backup tool, then execute after logon with the correct user ID and password.
Cause
Failed to access the database.
Resolution
Please confirm the database environment.
Cause
The saving target path folder has not been input.
Resolution
Please input the saving target path folder.
Cause
Characters not allowed are used in the saving target path folder. The following characters are not allowed.
Resolution
Please input with the allowed characters in the saving target path folder.
Cause
The folder for placing backup file has not been set correctly. Message appears when drive or folder which does not exist has been specified.
Resolution
Please set the correct folder name.
Cause
When selecting the folder for placing backup file, attached data saving folder has specified drive name only.
Resolution
Please input the folder name of saving target path folder (full path).
Cause
The backup target period (year, month and day) has not been input.
Resolution
Please input backup target period (year, month and day).
Cause
Displayed in the case where the specified backup period is incorrect.
The order of the specified start date and end date is incorrect
A date earlier than January 1st, 2000 is specified
The start date or end date is later than the system date.
Resolution
Please set the correct backup target period (year, month and day).
Cause
Displayed in the case where the specified number of days of backup target is incorrect. Range of the possibly specified number of days: 1~999
Resolution
Please set the correct backup target period (number of days).
Cause
Displayed in the case where backup target date is a date earlier than January 1st, 2000.
Resolution
Please set the correct backup target period (number of days).
Cause
Displayed in the case where the specified number of months of backup target is incorrect. Range of the possibly specified number of months: 1~99
Resolution
Please set the correct backup target period (number of months).
Cause
Displayed in the case where the specified number of months of backup target is a date earlier than January 1st, 2000.
Resolution
Please set the correct backup target period (number of months).
Cause
The category of backup target log has not been selected.
Resolution
Please select more than one categories of backup target log.
Cause
The folder for saving result log file has not been set correctly. Message appears when drive or folder which does not exist has been specified.
Resolution
Please set the correct file name (full path).
Cause
Characters not allowed are used in the name of the folder or file for saving result log file.
Resolution
Please input with the allowed characters in result log file.
Cause
The folder name which does not exist has been input in the file name of result log file.
Resolution
Please set the correct folder name for result log file.
Cause
Specify the deletion target period of the log as “Same as the target period of backup log information”, but the checkbox “Backup Log Information” has not been checked.
Resolution
Please execute this processing again after checking “Backup Log Information”.
Cause
In the window confirming number of log tables, the target period (year, month and day) has not been input.
Resolution
Please set the correct target period (year, month and day).
Cause
In the window confirming number of log tables, displayed in the case of the data is specified incorrectly.
The specified order of the specified start date and end date is incorrect
A date earlier than January 1st, 2000 is specified
Resolution
Please set the correct target period (year, month and day)
Cause
The database environment has fault.
Resolution
Please contact Fujitsu technical staff.
Cause
Displayed in the case where the entered value in execution date has exceeded the specified range.
Resolution
Please specify a value within 1~31.
Cause
Displayed in the case where the entered value in number of saving days has exceeded the specified range.
Resolution
Please specify a value within 1~365.
Cause
Displayed in the case where the backup target folder does not exist.
Resolution
Please specify an existing folder.
Cause
Displayed in the case where no authority to access the backup target path folder.
Resolution
Please specify a folder with access authority.
Cause
Displayed in the case where the specified task executing user does not exist.
Resolution
Please specify an existing user with Administrator authority.
Variable Information
%d: detailed error code
Cause
Displayed in the case where inspecting the task executing user failed.
Resolution
This would not happen generally.
Cause
Displayed in the case where the specified task executing user has no Administrator authority.
Resolution
Please specify a user with Administrator authority.
Cause
Displayed in the case where saving configuration value failed.
Resolution
This would not happen generally.
Cause
Displayed in the case where the saving date has not been selected.
Resolution
Please select the saving date.
Cause
Displayed when the password of task executing user is blank.
Resolution
Please enter the password.
Cause
Displayed in the case where the password of task executing user is incorrect.
Resolution
Please enter the correct password.
Cause
Displayed in the case where the logon test of task executing user failed.
Resolution
This would not happen generally.
Cause
Displayed in the case where the automatic backup settings have been completed.
Resolution
-
Cause
Displayed in the case where the automatic backup is set as [No].
Resolution
-
Cause
Displayed in the case where the automatic backup settings have been cancelled.
Resolution
-
Cause
Displayed in the case where the settings of automatic backup which is started from database construction tool have been completed.
Resolution
-
Cause
Displayed in the case where the settings of automatic backup which is started from database construction tool are set as [No].
Resolution
-
Cause
Displayed in the case where the settings of automatic backup which is started from database construction tool have been cancelled.
Resolution
-
Cause
The specified target period of log information backup does not match that specified in log information deletion.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Log information backup has not been set.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to get trace log.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The startup processing of Level Control Service and Server Service is under execution.
Resolution
Please click the [OK] button.
Cause
The stopping processing of Level Control Service and Server Service is under execution.
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
Intend to start Level Control Service and Server Service.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to stop Level Control Service and Server Service.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to execute backup processing.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to complete the backup function.
Resolution
Please click the [Yes] button to save the current entered value, if not, please click the [No] button. To cancel, please click the [Cancel] button.
Cause
Message appears when the current logged-on to Windows user has no Administrator authority.
Resolution
Please execute after logon to Windows as Administrator.
Cause
The restoration tool is under execution.
Resolution
Prepare for starting the backup tool, please stop the restoration tool first, and then start the backup tool.
Cause
The service of Management Server is under execution.
Resolution
Prepare for executing backup, please stop the service of the Management Server and then execute the backup.
Cause
The service cannot be started.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
The service cannot be stopped.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
The system environment has fault.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
It might be caused by the following.
No writable authority for the saving target path folder
The saving target path folder is set as writable prohibition
The saving target path folder is set as write-protection
Resolution
Please specify the writable saving target path folder.
Cause
It might be caused by the following.
The disk capacity of drive for exporting result log file is insufficient
The writable authority of the output target path folder of result log file has not been set
Resolution
Please execute again after confirming the environment of result log file.
Cause
The saving target path folder of the command detailed log file does not exist.
Resolution
Please confirm whether the saving target path folder specified in [Command Log Saving Target Path Folder Location] of the [Trace/Folder/CT Self Version Upgrade Settings] window of server settings tool exists.
Variable Information
%s: file name
Cause
Cannot access this file or this file does not exist.
Resolution
Please confirm whether there is authority to access this file, and execute the deletion operation after confirming whether this file exists.
Cause
Failed to get service status.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
Displayed in the case where errors occurred in the backup processing. It might be caused by the following.
The backup table is set as access prohibition
The disk space of backup target path is insufficient
Resolution
Confirm the result log file, the error table and export file. When accessing the backup table is prohibited, please remove the access prohibition. When the disk space of backup target path is insufficient, please specify the drive with larger rest space.
Variable Information
%d: detailed error code
Cause
Errors occurred in the database, cannot get necessary information.
Resolution
Please restore the database to normal and execute again.
Cause
Try using the “Remote Desktop Connection” function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the “Remote Desktop Connection” function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Variable Information
%s: name of function where error occurred
Cause
-
Resolution
-
Cause
Active Directory Linkage command is operating, the backup tool cannot be started.
Resolution
Please restart after completing Active Directory Linkage command.
Cause
System error occurred when inspecting whether “Remote Desktop Connection” is used.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
Another user has started the backup tool, so it cannot be started.
Resolution
Please start the backup tool after the other user finishes using the backup tool.
Cause
Systemwalker Desktop Patrol configuration information import command is operating, so the backup tool cannot be started.
Resolution
Please start after Systemwalker Desktop Patrol composition information import command is completed.
Variable Information
%d: detailed error code
Cause
Displayed in the case where failed to delete the automatic backup task.
Resolution
This would not happen generally.
Variable Information
%d: detailed error code
Cause
Displayed in the case where automatic backup task logon failed.
Resolution
This would not happen generally.
Cause
Displayed in the case of the startup parameter error.
Resolution
The backup tool cannot be started manually.
Please start it from the menu.
Cause
Displayed in the case where the backup processing has been completed successfully.
Resolution
-
DTKSTCV
Cause
Failed to access the database.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: start date that is out of the specified range
Cause
Displayed in the case where the specified start date is incorrect. The range which can be specified is: 00000000 or within 20010000~20350000.
Resolution
Please specify a value within the correct range.
Cause
Displayed in the case where the entered start date or end date is not 8-digit number.
Resolution
Please specify the start date and end date as a 8-digit number.
Variable Information
%s: end date that is out of the specified range
Cause
Displayed in the case where the specified end date is incorrect. The range which can be specified is: within 20010000~20350000
Resolution
Please inspect the parameter you enter. The range which can be specified is: within 20010000~20350000
Cause
Displayed in the case where the relation between the entered start date and end date does not match the start date≤ the end date.
Resolution
Please enter according to the start date≤ the end date.
Cause
Try using the “Remote Desktop Connection” function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the “Remote Desktop Connection” function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
System error occurred when inspecting whether “Remote Desktop Connection” is used.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
In the backup command, the entered parameter is incorrect. The number of parameters is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Cause
The specified CSV file name is incorrect. Displayed in the case where the input folder does not exist.
Resolution
Please specify the name of file containing the existing folder.
Cause
The specified CSV file name is incorrect. \, /, :, *, ?, ", <, >, | are not allowed in the file name.
Resolution
Please input the file name correctly.
Variable Information
%s: file name with format error
Cause
The specified CSV file name is incorrect. Displayed in the case of file name format error.
Resolution
Please specify the file name in full path.
Variable Information
%s: the existing folder name and the repeated file name
Cause
The specified CSV file name is incorrect. The folder with the same name as the existing folder has been specified, cannot create file.
Resolution
Please specify a name different from that of the folder.
Cause
It might be caused by the following.
Try starting this program by using the “Remote Desktop Connection” function (remote connection through the terminal service of Windows).
File SWDB.ini in Windows folder has been deleted, or the content of file SWDB.ini is incorrect.
Resolution
Please execute this program directly on the Management Server or Master Management Server, and confirm whether file SWDB.ini exists in Windows folder. If not, or the content has not been updated, please reinstall the Management Server or Master Management Server and then perform server settings.
Cause
It might be caused by the following.
No writable authority to the saving target path folder
The saving target path folder is set as writable prohibition
The saving target path folder is set as write-protection
Resolution
Please specify a writable saving target path folder.
DTKDELST
Cause
Failed to access the database.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: start date that is out of the specified range
Cause
Displayed when the specified start date is incorrect. The number range that can be specified is: 00000000, or within 20010000~20350000
Resolution
Please specify the date within the correct number range.
Cause
Displayed in the case where the entered start date or end date is not 8-digit number.
Resolution
Please specify the start date and end date as a 8-digit number.
Variable Information
%s: end date that is out of the specified range
Cause
Displayed in the case where the specified end date is incorrect. The number range that can be specified is: within 20010000~20350000
Resolution
Please inspect the parameter you entered. The number range that can be specified is: within 20010000~20350000
Cause
Displayed in the case where the relation between entered start date and the end date does not match the start date≤ the end date.
Resolution
Please enter according to the start date≤ the end date.
Variable Information
%s: parameter that cannot be specified
Cause
The specified keyword that the system does not pop up the acknowledgement information is incorrect.
Resolution
When prohibiting the system popping up the acknowledgement information, please specify parameter -y or -Y.
Cause
The database has not been constructed or the database service has been stopped.
Resolution
Please confirm the content such as event log, execute again after starting the service.
Cause
Try using the [Remote Desktop Connection] function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the “Remote Desktop Connection” function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
System error occurred when inspecting whether “Remote Desktop Connection” is used.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
In the backup command, the entered parameter is incorrect. The number of parameters is insufficient or unnecessary parameters have been set.
Resolution
Please inspect the parameter you entered.
Cause
It might be caused by the following.
Try starting this program through the “Remote Desktop Connection” function (remote connection through the terminal service of Windows).
File SWDB.ini in Windows folder has been deleted, or the content of file SWDB.ini is incorrect.
Resolution
Please execute this program on the Management Server or Master Management Server. And confirm whether file SWDB.ini exists in Windows folder, if not or in the case where the content has not been updated, please reinstall Management Server or Master Management Server and then perform server settings.
Cause
Message for confirmation appears when intending to delete configuration change log table.
Resolution
Enter Y or y, press the ENTER button to start processing. Enter N or n, press the ENTER button to cancel processing.
DTKBFDM
Cause
In the backup command, the entered parameter is incorrect. The number of parameter is incorrect or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: parameter exceeding the specified range
Cause
In the value of date, a number out of the range from 0 to 20000 has been entered, or characters other than numerals has been entered.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: parameter exceeding the specified range or parameter other than numerals
Cause
In the value of month, a number out of the range from 0~120, or characters other than numerals have been input.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: parameter other than the specified keyword
Cause
When specifying the value of month, a value other than "MONTH" has been specified in the keyword.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: parameter exceeding the specified range
Cause
Display in the case where the specified date is incorrect.
The number range that can be specified: 1-31 or 99 or omitted.
Resolution
Please inspect the parameter you entered.
DTKLG1T
Cause
The folder for placing the backup file was directly saved under the drive.
Resolution
Please input the folder name of the saving target path folder (full path).
Cause
Failed to access the database.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: start date exceeding the specified range
Cause
Displayed when the specified start date is incorrect. The number range that can be specified: 00000000 or within 20010000~20350000
Resolution
Please specify the date within the correct number range.
Cause
Displayed in the case where the entered start date or end date is not 8-digit number.
Resolution
Please specify 8-digit numbers for the start date and end date.
Variable Information
%s: end date exceeding the specified range
Cause
Displayed in the case where the specified end date is incorrect. The number range that can be specified: within 20010000-20350000
Resolution
Please inspect the parameter you entered. Please specify the date within the correct number range.
Cause
Displayed in the case where the relation between the entered start date and end date does not match the start date≤ the end date.
Resolution
Please enter according to the start date≤ the end date.
Variable Information
%s: name of the output target path folder which does not exist
Cause
Displayed in the case where the specified output target path folder is incorrect.
The folder format has not been specified
The folder does not exist
Resolution
Please specify the name of the folder which actually exists in full path.
Variable Information
%s: the incorrect parameter string
Cause
Displayed in the case where the specified extracted Key is incorrect.
Resolution
Please inspect the parameter you entered. Please omit or specify as "SERVER".
Cause
In the backup command, the entered parameter is incorrect. The number of parameter is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Cause
Displayed in the case where the specified log category is incorrect. The range of possibly entered number: 1~14, 16, 17, 24, 25, 29, 31, 34, 90.
Resolution
Please specify the date within the correct number range.
Variable Information
%s: name of the backup file with the same name as the existing folder
Cause
The specified backup file name is incorrect. Name same as the existing folder has been specified, cannot create the file.
Resolution
Please specify a name different from the folder.
Variable Information
%s: name of the backup file with file name format error
Cause
The specified backup file name is incorrect. Displayed in the case of file name format error.
Resolution
Please specify the file name in full path.
Cause
The specified backup file name is incorrect. Displayed in the case where the input folder does not exist.
Resolution
Please specify name of the file containing the actually existing folder.
Cause
The specified backup file name is incorrect. \, /, :, *, ?, ", <, >, | are not allowed in the file name.
Resolution
Please input the file name correctly.
Cause
Try using the “Remote Desktop Connection” function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the “Remote Desktop Connection” function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
System error occurred when inspecting whether “Remote Desktop Connection” is used.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
It might be caused by the following.
No writable authority for the saving target path folder
The saving target path folder is set as writable prohibition
The saving target path folder is set as write-protection
Resolution
Please specify the writable saving target path folder.
Cause
The saving target path folder of the command detailed log file does not exist.
Resolution
Please confirm whether the saving target path folder set in [Command Log Saving Target Path Folder Settings] in the [Trace/Folder/CT Self Version Upgrade Settings] window of the server settings tool exists.
DTKCVDL
Cause
Cannot specify parameter.
Resolution
Please delete the parameter.
Cause
It might be caused by the following.
Directory name displayed in the message exists already.
The directory or drive of the directory prohibits being written.
The rest space of the drive of the directory is insufficient.
Resolution
Modify the existing directory as other name, or release writable prohibition, or guarantee the rest space of the drive.
Cause
The environment variable parameter ([bkdays]) in the batch file has not been set, or the value is incorrect.
Resolution
Please set a value within 0~364.
Cause
The directory name displayed in the message does not exist.
Resolution
The set environment variables ([bkdrive] and [bkdir]) in DTKLGAT file are incorrect. Please modify them.
Cause
Displayed when the specified extracted Key is incorrect.
Resolution
Please inspect the parameter you entered. Omitted or specified as "SERVER".
DTKBKDL
Cause
In the backup command, the entered parameter is incorrect. The number of parameters is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Cause
It might be caused by the following.
Directory name displayed in the message exists already.
The directory or drive of the directory prohibits being written.
The rest space of the drive of the directory is insufficient.
Resolution
Modify the existing directory as other name, or release writable prohibition, or guarantee the rest space of the drive.
Cause
Displayed in the case where the specified start date is incorrect. The number range that can be specified: 00000000 or 20010000~20350000
Resolution
Please specify the date within the normal number range.
Cause
Displayed in the case where the specified end date is incorrect. The number range that can be specified: within 20010000-20350000
Resolution
Please inspect the parameter you entered. Please specify the date within the correct number range.
Cause
Displayed in the case where the relation between the entered start date and end date does not match the start date≤ the end date.
Resolution
Please enter, according to the start date≤, the end date.
Cause
The directory name displayed in the message does not exist.
Resolution
In DTKLGAT file, the set environment variable parameter ([bkdrive] and [bkdir]) is incorrect. Please modify as the correct value.
Cause
Displayed in the case where the specified extracted Key is incorrect.
Resolution
Please inspect the parameter you input. Omitted or specified as "SERVER".
DTKDELR
Cause
Failed to access the database.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: start date exceeding the specified range
Cause
Displayed when the specified start date is incorrect. The number range that can be specified: 00000000 or 20010000~20350000
Resolution
Please specify the date within the correct number range.
Cause
Displayed when the entered start date or end date is not 8-digit number.
Resolution
Please specify the start date and end date as 8-digit numbers.
Variable Information
%s: end date exceeding the specified range
Cause
Displayed when the specified end date is incorrect. The number range that can be specified: 20010000~20350000
Resolution
Please inspect the parameter you entered. Please specify the date within the correct number range.
Cause
Displayed when the relation between the entered start date and the expiration does not match the start date≤ the expiration.
Resolution
Please enter according to the start date≤ the end date.
Variable Information
%s: extracted Key other than the specified keyword
Cause
Displayed in the case where the specified extracted Key is incorrect.
Resolution
Please inspect the parameter you entered. Omitted or specify as "SERVER".
Cause
In the backup command, the entered parameter is incorrect. The number of parameter is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: parameter other than the specified keyword
Cause
When setting keyword that does not pop up the window for confirming deletion, the set keyword is incorrect.
Resolution
If there is no need for popping up the window for confirming deletion, please specify -y or -Y in the parameter.
Variable Information
%s: file name
Cause
No access authority or the file does not exist.
Resolution
-
Cause
The database has not been constructed or the database service has been stopped.
Resolution
Please confirm event log, etc. and execute again after starting the service.
Cause
Try using the “Remote Desktop Connection” function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the “Remote Desktop Connection” function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
System error occurred when inspecting whether “Remote Desktop Connection” is used.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
Message appears for confirmation when intending to delete log table.
Resolution
Enter Y or y, press the ENTER button to start the processing. Enter N or n, press the ENTER button to cancel the processing.
Cause
The saving target path folder of the command detailed log file does not exist.
Resolution
Please confirm whether the saving target path folder set in [Command Log Saving Target Path Folder Settings] in the [Trace/Folder/CT Self Version Upgrade Settings] window of the server settings tool exists.
DTKLGAT
Cause
In the backup command, the entered parameter is incorrect. The number of parameter is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Cause
It might be caused by the following.
Directory name displayed in the message exists already.
The directory or drive of the directory prohibits being written.
The rest space of the drive of the directory is insufficient.
Resolution
Modify the existing directory as other name, or release writable prohibition, or guarantee the rest space of drive.
Cause
Displayed when the specified start date is incorrect. The number range that can be specified is: 00000000 or 20010000~20350000.
Resolution
Please specify the date within the correct number range.
Cause
Displayed in the case where the specified end date is incorrect. The number range that can be specified: within 20010000~20350000.
Resolution
Please inspect the parameter you entered. Please specify the date within the correct number range.
Cause
Displayed when the relation between the entered start date and the end date does not match the start date≤ the end date.
Resolution
Please enter according to the start date≤ the end date.
Cause
The directory name displayed in the message does not exist.
Resolution
In DTKLGAT file, the set environment variable parameter ([bkdrive] and [bkdir]) is incorrect. Please modify as the correct value.
Cause
Displayed when the specified extracted Key is incorrect.
Resolution
Please inspect the parameter you entered. Omitted or specify as “SERVER”.
DTKLGTB
Cause
It might be caused by the following.
No writable authority to the saving target path folder
The saving target path folder is set as writable prohibition
The saving target path folder is set as write-protection
Resolution
Please specify a writable saving target path folder.
Cause
The saving target path folder of the command detailed log file does not exist.
Resolution
Please confirm whether the saving target path folder set in [Command Log Saving Target Path Folder Settings] in the [Trace/Folder/CT Self Version Upgrade Settings] window of the server settings tool exists.
Cause
Failed to access the database.
Resolution
Please inspect the parameter you entered
Cause
In the backup command, the entered parameter is incorrect. The number of parameter is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: start date exceeding the specified range
Cause
Displayed in the case where the specified start date is incorrect. The number range that can be specified is : 00000000 or 20010000~20350000
Resolution
Please specify the date in the correct number range.
Cause
Displayed when the entered start date or end date is not 8-digit number.
Resolution
Please specify 8-digit numbers for the start date and end date.
Variable Information
%s: end date exceeding the specified range
Cause
Displayed when the specified end date is incorrect. The number range that can be specified: within 20010000~20350000
Resolution
Please inspect the parameter you entered. Please specify the date within the correct number range.
Cause
Displayed in the case where the relation between the entered start date and the end date does not match the start date≤ the end date.
Resolution
Please enter according to the start date≤ the end date.
Variable Information
%s: name of the saving target path folder which does not exist
Cause
Displayed in the case where the specified saving target path folder is incorrect.
Folder format has not been specified
The folder does not exist
Resolution
Please specify the name of folder that actually exists in full path.
Variable Information
%s: extracted Key other than the specified keyword
Cause
Displayed in case the specified extracted Key is incorrect.
Resolution
Please inspect the parameter you entered. Omitted or specify as “SERVER”.
Cause
Try using the [Remote Desktop Connection] function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the [Remote Desktop Connection] function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in Management Server or Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
System error occurred when inspecting whether [Remote Desktop Connection] is used.
Resolution
Please execute the program directly in Management Server or Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
DTKMSTB
Cause
Failed to access the database.
Resolution
Please inspect the parameter you entered.
Cause
In the backup command, the entered parameter is incorrect. The number of parameters is insufficient or unnecessary parameter has been set.
Resolution
Please inspect the parameter you entered.
Variable Information
%s: name of the saving target path folder which does not exist
Cause
Displayed in case the specified saving target path folder is incorrect.
Folder format has not been specified
The folder does not exist
Resolution
Please specify the name of folder that actually exists in full path.
Cause
Try using the [Remote Desktop Connection] function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the [Remote Desktop Connection] function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in Management Server or Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
System error occurred when inspecting whether [Remote Desktop Connection] is used.
Resolution
Please execute the program directly in Management Server or Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
It might be caused by the following.
No writable authority for the saving target path folder
The saving target path folder is set as writable prohibition
The saving target path folder is set as write-protection
Resolution
Please specify a writable saving target path folder.
Cause
The saving target path folder of command detailed log file does not exist.
Resolution
Please confirm whether the saving target path folder set in [Command Log Saving Target Path Folder Settings] in the [Trace/Folder/CT Self Version Upgrade Settings] window of the server settings tool exists.
DTKATBK
Cause
Displayed in case the database cannot be connected.
Resolution
Please confirm whether the database has been moved.
Cause
Try using the [Remote Desktop Connection] function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the [Remote Desktop Connection] function in the system, try starting this program in the Central Console window.
Resolution
This program cannot be started manually.
Cause
System error occurred when inspecting whether [Remote Desktop Connection] is used.
Resolution
This program cannot be started manually.
Cause
Displayed in case intending to start this service manually.
Resolution
This program cannot be started manually.
Variable Information
%s: backup target path folder
Cause
Displayed in case the saving target path folder does not exist.
Resolution
Please confirm the saving target path folder through the automatic backup settings of the backup tool.
Cause
Displayed in case the information of the saving target path folder cannot be acquired.
Resolution
Please confirm the saving target path folder through the automatic backup settings of the backup tool.
Cause
Displayed in case the information of backup user cannot be acquired.
Resolution
Not displayed generally.
Cause
Displayed in case the selection information of saving date is incorrect.
Resolution
Please confirm the selected saving date through the automatic backup settings of the backup tool.
Cause
Displayed in case the information about number of days of the saving date is incorrect.
Resolution
Please confirm the selected number of days of saving date through the automatic backup settings through the backup tool.
Cause
Displayed in case the information about number of weeks of the saving date is incorrect.
Resolution
Please confirm the selected number of weeks of saving date through the automatic backup settings through the backup tool.
Cause
Displayed in case the information about number of months of the saving date is incorrect.
Resolution
Please confirm the selected number of months of saving date through the automatic backup settings through the backup tool.
Cause
Displayed in case the path of database cannot be acquired.
Resolution
Not displayed generally.
Variable Information
%d: detailed error code
Cause
Displayed in case failed to get the final date.
Resolution
Please confirm the selection of saving date and the values entered in the selected day, week and month through the automatic backup settings of the backup tool.
Variable Information
%s: the created backup folder
Cause
Displayed in case failed to create the backup folder.
Resolution
Please confirm whether the backup target path folder specified in the automatic backup settings of the backup tool exists, or confirm whether the Administrator authority is writable.
Cause
Displayed in case failed to access the database.
Resolution
Please confirm whether the database has been started.
Cause
Displayed in case that errors returned in the process of backing up management information.
Resolution
When DTKMSTB output the error information, please handle according to related resolution.
Cause
Displayed in case that errors returned in the process of backing up management information.
Resolution
When DTKSTCV output the error information, please handle according to related resolution.
Cause
Displayed in case that errors returned in the process of deleting settings change log.
Resolution
When DTKSTCV output the error information, please handle according to related resolution.
Variable Information
%s: log information to be exported
Cause
Displayed in case that errors occurred in the process of exporting log in the form of Log Viewer.
Resolution
When DTKSTCV output the error information, please handle according to related resolution.
Cause
Displayed in case that errors occurred in the process of backing up the log.
Resolution
When DTKSTCV output the error information, please handle according to related resolution.
Cause
Displayed in case that errors occurred in the process of delete the log.
Resolution
When DTKSTCV output the error information, please handle according to related resolution.
Cause
Displayed in case automatic backup failed.
Resolution
Because other information will be displayed at the same time, please set about handling from another information.
Cause
Displayed in case the automatic backup user does not exist.
Resolution
Not displayed usually.
Cause
Displayed in case information of the backup user GUID cannot be acquired.
Resolution
Not displayed usually.
Cause
Displayed in case starting automatic backup.
Resolution
-
Cause
Displayed in case starting to back up management information.
Resolution
-
Cause
Displayed in case starting to back up settings change log.
Resolution
-
Cause
Displayed in case starting to delete settings change log.
Resolution
-
Variable Information
%s: the output log information
Cause
Displayed in case starting to output the log in the form of Log Viewer.
Resolution
-
Cause
Displayed in case starting to back up log.
Resolution
-
Cause
Displayed in case starting to delete log.
Resolution
-
Cause
Displayed in case automatic backup has completed.
Resolution
Not displayed generally.
Cause
Intend to get trace log.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%1: current status of Level Control Service [Start/Stop]
%2: current status of Server Service [Start/Stop]
Cause
Intend to start Level Control Service and Server Service.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%1: current status of Level Control Service [Start/Stop]
%2: current status of Server Service [Start/Stop]
Cause
Intend to stop Level Control Service and Server Service.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to finish the restoration function.
Resolution
Please click the [Yes] button to save the current entered value, if not, please click the [No] button; to cancel, please click the [Cancel] button.
Cause
Intend to restore the operation database.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to restore the log viewing database.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
User ID has not been entered.
Resolution
Please enter the user ID.
Cause
The password has not been entered.
Resolution
Please enter the password.
Cause
The user ID or the password is incorrect.
Resolution
Please set the correct user ID and password.
Cause
Displayed in the case where the authentication failed for three times or more.
Resolution
To start the restoration tool, please enter the correct user ID and password to log on again and then perform that.
Cause
Failed to access the database.
Resolution
Please confirm the database environment.
Cause
The restoration file reference folder has not been input.
Resolution
Please input the restoration file reference folder.
Cause
Characters not allowed are used in the restoration file reference folder.
Resolution
Please input with the allowed characters in the restoration file reference folder.
Cause
The restoration file reference folder has not been set correctly. This message appears when drive or folder that does not exist has been specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the restoration file reference folder.
Resolution
Please the folder name (full path) in the restoration file reference folder.
Cause
The result log file has not been set correctly. This message appears when drive or folder that does not exist has been specified.
Resolution
Please set the correct file name (full path).
Cause
Characters not allowed are used in the result log file.
Resolution
Please input the allowed characters in the result log file.
Cause
Folder name which does not exist has been input in the result log file.
Resolution
Please set the correct folder name in the result log file.
Cause
Name same as the folder name has been specified in the result log file.
Resolution
Please set a name different from other file and folder for the result log file.
Cause
The folder for operation has not been set correctly. This message appears when the drive or folder that does not exist has been specified.
Resolution
Please set the correct folder for operation.
Cause
Characters not allowed are used in the folder for operation.
Resolution
Please input the allowed characters in the folder for operation.
Cause
The folder for operation has not been set correctly. This message appears when drive or folder which does not exist has been specified.
Resolution
Please set the correct folder name.
Cause
Drive name only has been specified in the folder for operation.
Resolution
Please input the folder name of the folder for operation (full path).
Cause
The database environment is incomplete.
Resolution
Please contact Fujitsu technical staff.
Variable Information
%s: name of file which failed to open
Cause
Failed to open the input file. The correspondent file name is displayed in the window (%s part in the message above).
Resolution
Please confirm whether the specified file exists, or if the writable authority has been set.
Cause
In the management information file as the restoration target, the file format of the restoration file for LEVELOBJECT is different from that of LEVELOBJECT backed up by using the backup function of Desktop Keeper.
Resolution
Please specify the restoration file reference folder as file backed up by Desktop Keeper.
Variable Information
%s: management information table name
Cause
It might be caused by the following.
The archiving log space of the database is insufficient.
Rollback segment space of the database is insufficient
Resolution
Please confirm the database environment. When the disk space is insufficient, please execute processing after space expanding.
Variable Information
%s: the restoration target data folder specified in the restoration tool
Cause
-
Resolution
-
Variable Information
%s: incorrect restoration data (management information table name)
Cause
-
Resolution
-
Cause
The restoration file reference folder has been specified as the folder under the network drive.
Resolution
Please specify the restoration file reference folder as the folder under local drive.
Cause
Folder for operation has been specified as the folder under the network drive.
Resolution
Please specify folder for operation as the folder under local drive.
Variable Information
%d: detailed error number
Cause
The database has fault, so cannot get required information.
Resolution
After restore the database to the normal status and then execute again.
Cause
The management information file of restoration target does not exist in the specified folder.
Resolution
Please specify the folder for placing the management information file of restoration target and then execute again.
Variable Information
%s: name of missing file
Cause
In the management information file of restoration target, the file displayed in the message is missing. The restoration cannot be performed without this file.
Resolution
Please execute again after placing the file specified by %s to the restoration file reference folder.
Cause
The log information file of restoration target does not exist in the specified folder.
Resolution
Please specify the folder for placing the log information file of restoration target and then execute again.
Variable Information
%s: name of missing file
Cause
In the log information file of restoration target, the file displayed in the message is missing. The restoration cannot be performed without this file.
Resolution
Please execute again after placing the file specified by %s to the restoration file reference folder.
Cause
The management information backup target folder has not been input.
Resolution
Please input the management information backup target folder.
Cause
Displayed in the case where automatic backup user cannot be created due to user ID repeated.
Resolution
Intend to create automatic user ID by using 'AUTOBACKUPUSER' or the spare user ID within 'AUTOBACKUPUSER_1'~'AUTOBACKUPUSER_1000'.
In the range above, please reserve an available ID.
Cause
Displayed in the case where the saving target folder of command line log for log viewing has not been specified in “Folder/CT Self Version Settings” of “Server Settings Tool”, or the specified folder does not exist.
Resolution
Please specify the existing folder in the “Folder/CT Self Version Settings” window of “Server Settings Tool”.
Cause
Displayed in the case where the saving target folder of attached data for log viewing has not been specified in “Folder/CT Self Version Settings” of “Server Settings Tool”, or the specified folder does not exist.
Resolution
Please specify the existing folder in the “Folder/CT Self Version Settings” window of “Server Settings Tool”.
Cause
Displayed in the case where the saving target folder of E-mail content for log viewing has not been specified in “Folder/CT Self Version Settings” of “Server Settings Tool”, or the specified folder does not exist.
Resolution
Please specify the existing folder in the “Folder/CT Self Version Settings” window of “Server Settings Tool”.
Cause
The restoration file reference folder has not been selected.
Resolution
Please select the restoration file reference folder.
Cause
The starting processing of Level Control Service and Server Service is under execution.
Resolution
Please click the [OK] button.
Cause
The stopping processing of Level Control Service and Server Service is under execution.
Resolution
Please click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start/Stop]
%2: current status of Server Service [Start/Stop]
Cause
-
Resolution
Please click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start/Stop]
%2: current status of Server Service [Start/Stop]
Cause
-
Resolution
Please click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start/Stop]
%2: current status of Server Service [Start/Stop]
Cause
-
Resolution
Please click the [OK] button.
Cause
This massage appears when the current Windows user has no Administrator authority.
Resolution
Please execute after logon to Windows as Administrator.
Cause
The backup tool is under execution.
Resolution
To start the restoration tool, please start it after stopping the backup tool.
Cause
The service of the Management Server is under execution.
Resolution
To restore, please stop the service of the Management Server and then execute.
Cause
Failed to get the service status.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
The service cannot be started.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
The service cannot be stopped.
Resolution
Please try again later. If it cannot be started still, please contact Fujitsu technical staff.
Cause
The system environment has fault.
Resolution
Please contact Fujitsu technical staff.
Cause
SWDB.INI file error
Resolution
Please confirm the content of file SWDB.INI.
Variable Information
%s: name of the folder for operation specified in the list tool
Cause
The space of disk for temporary file conversion is insufficient.
Resolution
Please specify the drive with the biggest file size space among the input files as the operating folder.
Cause
The saving target path folder of command detailed log file does not exist.
Resolution
Please confirm whether the saving target path folder set in [Command Log Saving Target Path Folder Settings] in the [Trace/Folder/CT Self Version Upgrade Settings] window of server settings tool exists.
Cause
It might be caused by the following. The disk space of the drive for outputting the result log file is insufficient; the target folder for outputting the result log file has no writable authority.
Resolution
Please inspect the environment exporting the result log file, and execute again.
Cause
It might be caused by the following. Data space of the database is insufficient; the archiving log space of the database is insufficient; Rollback segment space of the database is insufficient, other related database error.
Resolution
Please confirm the database environment. If the problem still exists, please contact Fujitsu technical staff.
Cause
Displayed in the case where error occurred in the restoration. It might be caused by the following. The capacity of the database to be restored is insufficient; the table to be restored prohibits access; the input data to be restored contains error.
Resolution
Please confirm the result log file, error table and the input file. If the capacity of the database to be restored is insufficient, please reconstruct the database. If the table to be restored prohibits access, please cancel access prohibition. Besides, please eliminate the causes of access prohibition. If error target line exists in the input file and the error target line is exported to the file with extension as .err, please restore after eliminating the problems in this line.
Cause
Try using the “Remote Desktop Connection” function (remote connection through the terminal service of Windows) to start this program. Or when there is user connected through the “Remote Desktop Connection” function in the system, try starting this program in the Central Console window.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Variable Information
%s: name of function with error
Cause
-
Resolution
Make investigation about the function error and the causes.
Cause
Active Directory Linkage command is operating, so the restoration tool cannot be started.
Resolution
Please operate the restoration tool after completing Active Directory Linkage command.
Cause
System error occurred when inspecting whether “Remote Desktop Connection” is used.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the “Remote Desktop Connection” function.
Cause
Another user has been using the restoration tool. So this user cannot operate the restoration tool.
Resolution
Please start after the other user finishes using the restoration tool.
Cause
Systemwalker Desktop Patrol composition information import command is operating, so the restoration tool cannot be started.
Resolution
Please start after completing executing Systemwalker Desktop Patrol configuration information import command.
Cause
Displayed in the case where the database path cannot be found.
Resolution
Cause
Displayed in the case where “the database path”\BackupCommand\DTKMSTB.exe cannot be found.
Resolution
Copy file DTKMSTB.exe to the path folder on the left.
Cause
Incorrect startup parameter has been specified for startup.
Resolution
Please confirm the startup parameter.
Cause
Displayed in the case where the restoration completed normally.
Resolution
-
Cause
The warning message for preventing operation database from being destroyed by misoperation when starting the restoration tool for operation database.
Resolution
When restoring the operation database, please click the “Yes” button; if a misoperation occurs, please click the “No” button.
