Cause
This message appears when the current logon Windows user does not have Administrator authority.
Resolution
Please execute after logon to Windows as Administrator.
Cause
System environment has fault.
Resolution
Please contact Fujitsu technical staff.
Cause
Logon password error in the system.
Resolution
Please reinstall Management Server or Master Management Server and reset it.
Cause
File SWDB.ini in Windows folder has been deleted, or the content of file SWDB.ini is incorrect.
Resolution
Please reinstall Management Server or Master Management Server and reset the server.
Cause
SWMailSettings.ini or file SWEventViewer.ini in Windows folder has been deleted.
Resolution
Please reinstall Management Server or Master Management Server and reset the server.
Cause
File SWCTVerSettings.ini in Windows folder has been deleted.
Resolution
Please reinstall Management Server or Master Management Server and reset the server.
Cause
System error occurred when inspecting [Remote Desktop Connection].
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
In the same Management Server, another user is starting server settings tool through other session.
Thus, it cannot be started repeatedly.
Resolution
Confirm whether there is any user using Console or [Remote Desktop Connection] function (remote connection through Windows terminal service) and cancel operating server settings tool.
Cause
File SWMailSettings.ini in Windows folder has been deleted.
Resolution
Please reinstall Management Server or Master Management Server.
Cause
File SWEventViewer.ini in Windows SYSTEM32 folder has been deleted.
Resolution
Please reinstall Management Server or Master Management Server.
Cause
Failed to get service status.
Resolution
Please retry after a while. If it cannot be started even though the measures above have been taken, please contact Fujitsu technical staff.
Cause
The service cannot be started.
Resolution
Please retry after a while. If it cannot be started even though the measures above have been taken, please contact Fujitsu technical staff.
Cause
The service cannot be cancelled.
Resolution
Please retry after a while. If it cannot be started even though the measures above have been taken, please contact Fujitsu technical staff.
Cause
In the Management Server or Master Management Server, one of the following processing of Systemwalker Desktop Keeper is being executed.
Data synchronization processing between Master Management Server and Management Server
Backup
Restore
Resolution
Please execute again after other processing is completed.
Cause
Try using the “Remote Desktop Connection” function (remote connection through Windows terminal service) to start the program.
Or try starting the program from the Console window when user connected through the [Remote Desktop Connection] function exists in the system.
Resolution
Please execute the program directly in the Management Server or Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
Errors occurred when importing data from Active Directory .
Resolution
Please confirm execution log and event log. However, in the case of being closed by force, information will not be output to event log.
Cause
It might be caused by the following:
Active Directory Linkage module has been deleted.
The access authority of Active Directory Linkage module has been modified.
Resolution
The following resolutions will be taken due to different causes, and then execute again. Please reinstall Management Server or Master Management Server. Please set the access authority (execution authority) of Active Directory Linkage module correctly.
Cause
The following processing of Systemwalker Desktop Keeper is being executed:
Data synchronization processing between Master Management Server and Management Server
Resolution
Please execute again after other processing is completed.
Cause
The following processing of Systemwalker Desktop Keeper is being executed:
·Data synchronization processing between Master Management Server and Management Server
Resolution
Please execute again after other processing is completed.
Cause
In Master Management Server or Management Server, one of the following processing of Systemwalker Desktop Keeper is being executed.
· Data synchronization processing between Master Management Server and Management Server
· Backup
· Restore
· Active Directory Linkage
Resolution
Please execute again after other processing is completed.
Cause
It might be caused by the following:
· Systemwalker Desktop Patrol composition information import command has been deleted.
· The access authority of Systemwalker Desktop Patrol configuration information import command has been modified.
· Systemwalker Desktop Patrol server information has not been set.
· Linkage file has not been created in Systemwalker Desktop Patrol server.
· The content of Linkage file created in Systemwalker Desktop Patrol server has errors.
Resolution
The following resolutions will be taken according to different causes, and then execute again.
· Reinstall Management Server and Master Management Server.
· Please correctly set the access authority (execution authority) of Systemwalker Desktop Patrol composition information import command.
· Correctly set URL of Desktop Patrol in the log management environment setup window.
· Create linkage file in Desktop Patrol.
· Create linkage file in Desktop Patrol again.
Cause
Errors occurred in the process of importing data from Systemwalker Desktop Patrol.
Resolution
Please confirm execution log and event log. However, in the case of being closed by force, information will not be output to event log.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
Data is being imported from Systemwalker Desktop Patrol.
Resolution
Please wait until the processing is completed.
Cause
-
Resolution
Please click the [OK] button.
Cause
The service of the Management Server should be stopped before modifying the content of ”System Settings”.
Resolution
Please click the [OK] button when checking the content. Please click the [Cancel] button to cancel the processing. When updating the information, please click the [OK] button after stopping the service of Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of ”Active Directory Linkage Settings”.
Resolution
Please click the [OK] button for content reference. Please click the [Cancel] button to cancel the processing. When updating the information, please click the [OK] button after stopping the service of Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of this window.
Resolution
Please click the [OK] button for content reference. Please click the [Cancel] button to cancel the processing. When updating the information, please click the [OK] button after stopping the service of Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of this window.
Resolution
Please click the [OK] button for content reference. Please click the [Cancel] button to cancel the processing. When updating the information, please click the [OK] button after stopping the service of the Management Server.
Cause
The service of the Management Server should be stopped before modifying folder settings.
Resolution
Please click the [OK] button for modifying reference or trace settings. Please click the [Cancel] button for terminating the processing.
When updating trace/folder/CT self-version upgrade settings, please click the [OK] button after stopping the service of the Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of this window.
Resolution
Please click the [OK] button for content reference. Please click the [Cancel] button to cancel the processing. When updating the information, please click the [OK] button after stopping the service of the Management Server.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
Cause
Intend to start Level Control Service and Server Service.
Resolution
To continue, please click the [OK] button. To finish processing, please click the [Cancel] button.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
Cause
Intend to stop Level Control Service and Server Service.
Resolution
To continue, please click the [OK] button. To finish processing, please click the [Cancel] button.
Cause
Intend to start linking with Active Directory data.
Resolution
To continue, please click the [OK] button. To finish processing, please click the [Cancel] button.
Cause
The prompt message when starting the [Exclusion Status Removal] window.
Resolution
Please click the [OK] button for displaying the [Exclusion Status Removal] window. To cancel the processing, please click the [Cancel] button.
Cause
Prompt information when starting to import Systemwalker Desktop Patrol composition information.
Resolution
To continue, please click the [OK] button. To finish processing, please click the [Cancel] button.
Cause
The user ID has not been entered.
Resolution
Please enter the user ID.
Cause
The password has not been entered.
Resolution
Please enter the password.
Cause
The user ID or password is incorrect.
Resolution
Please enter the correct user ID and password.
Cause
The prompt message when the authentication failed for three times or more.
Resolution
Please logon with the correct user ID and password to start server settings tool.
Cause
Failed to access the operation database.
Resolution
Please confirm the operation database environment.
Cause
The old password has not been entered.
Resolution
Please enter the old password.
Cause
The new password has not been entered.
Resolution
Please enter the new password.
Cause
The confirm password has not been entered.
Resolution
Please enter the confirm password.
Cause
The entered new password is different from the confirm password.
Resolution
Please enter the correct new password and confirm password.
Cause
The old password is incorrect.
Resolution
Please enter the correct password.
Cause
Characters not allowed are contained in the entered password.
Resolution
Please enter the password with characters allowed.
Cause
The password has not been encrypted.
Resolution
Please perform the modification again to change the password.
Cause
DB connection strings has not been entered.
Resolution
Please enter DB connection strings.
Cause
Character not allowed in DB connection strings have been entered.
Resolution
Please enter allowed characters.
Cause
DB connection user ID has not been entered.
Resolution
Please enter DB connection user ID.
Cause
Characters not allowed in DB connection user ID have been entered.
Resolution
Please enter allowed characters.
Cause
The values of the password (first entry) and the password (re-entry) are different.
Resolution
Please enter the same value in the password (first entry) and the password (re-entry).
Cause
DB connection timeout value has not been entered.
Resolution
Please enter DB connection timeout value.
Cause
Numerals out of the range from 15 to 999 or characters other than numerals are entered in DB connection timeout value.
Resolution
Please enter a value within 15-999.
Cause
DB command timeout value has not been entered.
Resolution
Please enter DB command timeout value.
Cause
Numerals out of the range from 15 to 999 or characters other than numerals are entered in DB command timeout value.
Resolution
Please enter a value within 15-999.
Cause
-
Resolution
Please click the [OK] button.
Cause
Click the “Settings/Connection Test” button for connection test, but failed to connect with the database.
Resolution
Please confirm the entered value.
Cause
When registering the first node, node classification has not been set as “Local Node”.
Resolution
Please set node classification as “Local Node”.
Cause
When registering the second node and following nodes, node classification has not been set as “Other Nodes”.
Resolution
Please set node classification as “Other Nodes”.
Cause
Node classification cannot be changed.
Resolution
-
Cause
Node name has not been entered.
Resolution
Please enter the node name.
Cause
Characters not allowed in node name has been entered.
Resolution
Please enter allowed characters.
Cause
Node name is repeated.
Resolution
Please enter a different node name.
Cause
The computer name has not been entered.
Resolution
Please enter the computer name.
Cause
Characters not allowed in the computer name have been entered.
Resolution
Please enter allowed characters.
Cause
The computer name is repeated.
Resolution
Please enter a different computer name.
Cause
IP address has not been entered.
Resolution
Please enter IP address.
Cause
IP address is repeated.
Resolution
Please enter a different IP address.
Cause
Server category error.
Resolution
Only one “Root Server” can be registered. Please select “Sub-Level Server”.
Cause
Local node cannot be deleted.
Resolution
-
Cause
Information in the operation database environment is incomplete. (PHYSICALNODELIST)
Resolution
Please contact Fujitsu technical staff.
Cause
Information in the operation database is incomplete. (NODEINFO)
Resolution
Please contact Fujitsu technical staff.
Cause
The update target has not been selected.
Resolution
Please select the update target from the list.
Cause
The target to be deleted has not been selected.
Resolution
Please select the target to be deleted from the list.
Cause
The user ID has not been entered.
Resolution
Please enter the user ID.
Cause
Characters not allowed are used in the user ID.
Resolution
Please enter the allowed characters again.
Cause
The user ID is repeated.
Resolution
Please enter a different user ID.
Cause
The access authority has not been selected.
Resolution
Please select access authority.
Cause
The number of messages has exceeded 1000, so they cannot be registered.
Resolution
-
Cause
The E-mail sending server has not been input.
Resolution
Please input E-mail sending server.
Cause
The input E-mail sending server is incorrect.
Resolution
Please input the correct E-mail sending server.
Cause
E-mail address of the recipient (TO) has not been input.
Resolution
Please input E-mail address of the recipient (TO).
Cause
The input E-mail address of the recipient (TO) is incorrect.
Resolution
Please input the correct E-mail address of the recipient (TO).
Cause
The input E-mail address of the recipient (CC) is incorrect.
Resolution
Please input the correct E-mail address of the recipient (CC).
Cause
E-mail address of the addresser (FROM) has not been input.
Resolution
Please input the E-mail address of the addresser (FROM).
Cause
The input E-mail address of the addresser (FROM) is incorrect.
Resolution
Please input the correct E-mail address of the addresser (FROM).
Cause
The server IP address has not been input.
Resolution
Please input the server IP address.
Cause
The input server IP address is incorrect.
Resolution
Please input the correct server IP address.
Cause
The port number (Management Console/Level Control Service) has not been entered.
Resolution
Please enter the port number (Management Console/Level Control Service).
Cause
The entered port number (Management Console/Level Control Service) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Log Viewer/Level Control Service) has not been entered.
Resolution
Please enter the port number (Log Viewer/Level Control Service).
Cause
The entered port number (Log Viewer/Level Control Service) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Server Service/Level Control Service) has not been entered.
Resolution
Please enter the port number (Server Service/Level Control Service).
Cause
The entered port number (Server Service/Level Control Service) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Level Control Service/Server Service) has not been entered.
Resolution
Please enter the port number (Level Control Service/Server Service).
Cause
The entered port number (Level Control Service/Server Service) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Level Control Service (upper-level)/Level Control Service (sub-level)) has not been entered.
Resolution
Please enter the port number (Level Control Service (upper-level)/Level Control Service (sub-level)).
Cause
The entered port number (Level Control Service (upper-level)/Level Control Service (sub-level)) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Level Control Service (sub-level)/Level Control Service (upper-level)) has not been entered.
Resolution
Please enter the port number (Level Control Service (sub-level)/Level Control Service (upper-level)).
Cause
The entered port number (Level Control Service (sub-level)/Level Control Service (upper-level)) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Server Service/CT) has not been entered.
Resolution
Please enter the port number (Server Service/CT).
Cause
The entered port number (Server Service/CT) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (CT /Server Service) has not been entered.
Resolution
Please enter the port number (CT /Server Service).
Cause
The port number (CT/Server Service) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (Server Service/CT (coexist with Management Server)) has not been entered.
Resolution
Please enter the port number (Server Service/CT (coexist with Management Server)).
Cause
The port number (Server Service/CT (coexist with Management Server)) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (CT/Server Service (image, etc.)) has not been entered.
Resolution
Please enter the port number (CT/Server Service (image, etc.)).
Cause
The port number (CT/Server Service (image, etc.)) value has exceeded the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The same value has been entered in the item which cannot be specified as the same port number.
Resolution
Please enter different values.
Cause
The connection timeout value between servers has not been entered.
Resolution
Please enter the connection timeout value between servers.
Cause
A value out of the range from 1 to 999 has been entered in the connection timeout value between servers.
Resolution
Please enter a value within 1-999.
Cause
Communication retry times between servers has not been entered.
Resolution
Please enter communication retry times between servers.
Cause
A value out of the range from 1 to 9 has been entered in communication retry times between servers.
Resolution
Please enter a value within 1-9.
Cause
Connection retry times of CT-Server has not been entered.
Resolution
Please enter connection retry times of CT-Server.
Cause
A value out of the range from 1 to 9 has been entered in connection retry times of CT-Server.
Resolution
Please enter a value within 1-9.
Cause
The maximum simultaneous connection number of CT has not been entered.
Resolution
Please enter the maximum simultaneous connection number of CT.
Cause
A value out of the range from 1 to 9999 has been entered in the maximum simultaneous connection number of CT.
Resolution
Please enter a value within 1-9999.
Cause
The command line log saving target path folder has not been input.
Resolution
Please input the command line log saving target path folder.
Cause
The characters not allowed are used in the folder name of the command line log saving target path folder.
Resolution
Please input with the allowed characters again.
Cause
The command line log saving target path folder is set as the root directory of drive.
Resolution
Please input the folder name of the command line log saving target path folder (full path).
Cause
The attached data saving target path folder has not been input.
Resolution
Please input the attached data saving target path folder.
Cause
Characters not allowed are used in the attached data saving target path folder.
Resolution
Please input with the allowed characters.
Cause
The attached data saving target path folder has not been set correctly. Message appears when the drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The attached data saving target path folder has specified the drive name only.
Resolution
Please input the folder name of the attached data saving target path folder (full path).
Cause
The saving target path of log batch receiving data has not been input.
Resolution
Please input the saving target path of log batch receiving data.
Cause
Characters not allowed are used in the saving target path folder of log batch receiving data.
Resolution
Please input with the allowed characters again.
Cause
The saving target path of log batch receiving data has not been set correctly. Message appears when the drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the saving target path of log batch receiving data.
Resolution
Please input the folder name of the saving target path of log batch receiving data (full path).
Cause
The CT uploading module saving target path has not been input.
Resolution
Please input the CT uploading module saving target path.
Cause
Characters not allowed are used in the CT uploading module saving target path folder.
Resolution
Please input with the allowed characters.
Cause
The CT uploading module saving target path has not been set correctly. Message appears when the drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name is specified in the CT uploading module saving target path only.
Resolution
Please input the folder name of the CT uploading module saving target path (full path).
Cause
The simultaneous downloading number (maximum) has not been entered.
Resolution
Please enter the simultaneous downloading number (maximum).
Cause
Characters other than single-byte numerals are contained in the simultaneous downloading number (maximum).
Resolution
Please enter single-byte numerals.
Cause
The entered value of the simultaneous downloading number (maximum) is one out of the range from 0 to 25.
Resolution
Please enter a value within 0-25.
Cause
The port number (for receiving E-mail) has not been entered.
Resolution
Please enter the port number (for receiving E-mail).
Cause
The entered port number (for receiving E-mail) value is one out of the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (for sending E-mail) has not been entered.
Resolution
Please enter the port number (for sending E-mail).
Cause
The entered port number (for sending E-mail) value is one out of the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The port number (for sending E-mail 2) has not been entered.
Resolution
Please enter the port number (for sending E-mail 2).
Cause
The entered port number (for sending E-mail 2) value is one out of the range from 5001 to 60000.
Resolution
Please enter a value within 5001-60000.
Cause
The entered port number (for sending E-mail) and the port number (for sending E-mail 2) are the same.
Resolution
Please set different port numbers for the port number (for sending E-mail) and the port number (for sending E-mail 2).
Cause
The log output target path folder has not been input.
Resolution
Please input the log output target path folder.
Cause
Characters not allowed are used in the log output target path folder.
Resolution
Please input with the allowed characters again.
Cause
The input log output target path folder is incorrect.
Resolution
Please input the correct log output target path folder name.
Cause
The drive name only is specified in the log output target path folder.
Resolution
Please input the folder name of the log output target path folder (full path).
Cause
The client installation target path has not been input.
Resolution
Please input the client installation target path.
Cause
Characters not allowed are used in the client installation target path.
Resolution
Please input with the allowed characters again.
Cause
The input client installation target path is incorrect.
Resolution
Please input the correct client installation target path.
Cause
The drive name only is specified in the client installation target path.
Resolution
Please input the folder name of the client installation target path (full path).
Cause
The installation settings file has not been input.
Resolution
Please input the installation settings file.
Cause
Characters not allowed are used in the installation settings file.
Resolution
Please input with the allowed characters .
Cause
Folder name that does not exist in the installation settings file has been input.
Resolution
Please set the correct file name (full path).
Variable Information
%s: file name
Cause
It might be caused by the following causes. No write-in authority to the saving target path folder. The saving target path folder is set as write prohibited. The saving target path folder is set as write-protection.
Resolution
Please specify writable saving target path folder.
Cause
The input installation settings file is incorrect.
Resolution
Please input the correct installation settings file.
Cause
In the process of restoring the operation database, the prompt message appears when failed to process the table SETINGS.
Resolution
Please restore the data of management information.
Cause
When the classification of the server of local node is “Root Server”, try other nodes.
Resolution
The registration of other nodes cannot be performed.
Cause
When the local node is “Sub-Level Server”, server of the other nodes can only be registered as “Root Server”.
Resolution
Please input it correctly.
Cause
Try registering 2 or more other nodes.
Resolution
2 or more other nodes cannot be registered.
Cause
Try modifying the server classification of the local node, but it cannot be modified due to other nodes existing.
Resolution
Please modify the server classification of the local node after deleting all other nodes.
Cause
To update other nodes, they must be deleted.
Resolution
To change the information of other nodes, delete them and then register again.
Cause
Try registering the second local node record.
Resolution
Only one record of local node can be registered.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Variable Information
%d: number of cases of the registered user information
Cause
Try registering the exceeding part.
Resolution
Please delete the registered but unnecessary information first and then register again during registration.
Cause
The user ID has not been entered.
Resolution
Please enter the user ID.
Cause
Limit code is contained in the user ID.
Resolution
Please do not use limit code in the user ID.
Cause
Limit code is contained the remarks.
Resolution
Please do not use limit code in the remarks.
Cause
The port number (for E-mail attachment prohibition) has not been entered.
Resolution
Please entered the port number (for E-mail attachment prohibition).
Cause
A value out of the range from 5001 to 60000 has been entered in the port number (for E-mail attachment prohibition).
Resolution
Please enter a value within 5001-60000.
Cause
The port number (for E-mail attachment prohibition 2) has not been entered.
Resolution
Please enter the port number (for E-mail attachment prohibition 2).
Cause
A value out of the range from 5001 to 60000 has been entered in the port number (for E-mail attachment prohibition 2).
Resolution
Please enter a value within 5001-60000.
Cause
The port number (for E-mail sending monitoring) has not been entered.
Resolution
Please enter the port number (for E-mail sending monitoring).
Cause
A value out of the range from 0 to 65535 has been entered in the port number (for E-mail sending monitoring).
Resolution
Please enter a value within 0-65535.
Cause
The same value is entered in the port number (for E-mail attachment prohibition) and the port number (for receiving E-mail).
Resolution
Please set different values for the port number (for E-mail attachment prohibition) and the port number (for receiving E-mail).
Cause
The same value is entered in the port number (for E-mail attachment prohibition) and the port number (for sending E-mail).
Resolution
Please set different values for the port number (for E-mail attachment prohibition) and the port number (for sending E-mail).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition) and the port number (for sending E-mail 2).
Resolution
Please set different values for the port number (for E-mail attachment prohibition) and the port number (for sending E-mail 2).
Cause
The notification reference time has not been entered.
Resolution
Please enter the notification reference time.
Cause
A value out of the range from 30 to 999 has been entered in the notification reference time.
Resolution
Please enter a value within 30-999.
Cause
The authentication type has not been selected.
Resolution
Please select the authentication type.
Cause
The authentication user ID has not been entered.
Resolution
Please enter the authentication user ID.
Cause
The exclusion status has not been selected.
Resolution
Please select the exclusion status.
Cause
The exclusion status you selected is the same as the one before updating.
Resolution
After refreshing display, please confirm the exclusion status of the record to be updated and the selected exclusion status and then execute again.
Cause
The authentication password has not been entered.
Resolution
Please enter the authentication password.
Cause
Perform Linkage has not been selected.
Resolution
Please select Perform Linkage.
Cause
The information in the operation database is incomplete. (EXCLUSIONCONTROL)
Resolution
Please contact Fujitsu technical staff.
Cause
The information in the database has been modified in the process of operating the target record.
Resolution
Please process it again after refreshing display.
Variable Information
%d: number of cases of registered domain controller information
Cause
Number of cases of domain controller information to be registered has exceeded the maximum that can be registered.
Resolution
Please delete the logged-on but unnecessary information first, and then logon again.
Cause
The domain name has not been input.
Resolution
Please input the domain name.
Cause
The input domain name is incorrect.
Resolution
Please input the correct domain name.
Cause
The domain name is repeated.
Resolution
Please input a different domain name.
Cause
A file with the correspondent relation of computer name and user ID saved has not been specified.
Resolution
Please specify a file with the correspondent relation of computer name and user ID saved.
Cause
The specified file does not exist.
Resolution
Please specify a file again after confirming the file.
Cause
Characters not allowed are contained in the authentication user ID.
Resolution
Please input with the allowed characters again.
Cause
Characters not allowed are contained in the authentication password.
Resolution
Please input with the allowed characters again.
Cause
The administrator notification function is set as “No”, but the “Perform SMTP Authentication” checkbox is still selected.
Resolution
When the administrator notification function is not used, the settings of SMTP authentication cannot be performed. Please cancel selecting the “Perform SMTP Authentication” checkbox.
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for receiving E-mail).
Resolution
Please set different values for the port number (for E-mail attachment prohibition 2) and the port number (for receiving E-mail).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail).
Resolution
Please set different values for the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail 2).
Resolution
Please set different values for the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail 2).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for E-mail attachment prohibition).
Resolution
Please set different values for the port number (for E-mail attachment prohibition 2) and the port number (for E-mail attachment prohibition).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for sending E-mail).
Resolution
Please set different values for the port number (for E-mail sending monitoring) and the port number (for sending E-mail).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for sending E-mail 2).
Resolution
Please set different values for the port number (for E-mail sending monitoring) and the port number (for sending E-mail 2).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for receiving E-mail).
Resolution
Please set different values for the port number (for E-mail sending monitoring) and the port number (for receiving E-mail).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition).
Resolution
Please set different values for the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition 2).
Resolution
Please set different values for the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition 2).
Cause
The user ID has not been entered.
Resolution
Please enter the user ID.
Cause
Characters not allowed are contained in the user ID.
Resolution
Please enter the user ID with the allowed characters again.
Cause
The port number has not been entered.
Resolution
Please enter the port number.
Cause
A value out of the range from 0 to 65535 has been entered in the port number.
Resolution
Please enter a value within 0-65535.
Cause
Intend to modify the user ID without entering the password.
Resolution
Please enter the password when intending to modify the user ID.
Cause
Characters not allowed are contained in the password.
Resolution
Please enter the password with characters allowed.
Cause
User ID cannot be modified.
Resolution
Please create a new user.
Cause
The input computer name is incorrect.
Resolution
Please input the correct computer name.
Cause
The threshold value for notifying DB space insufficient has not been entered.
Resolution
Please enter the threshold value for notifying DB space insufficient.
Cause
A value out of the range from 1 to 20 has been entered in the threshold value for notifying DB space insufficient.
Resolution
Please enter a value within 1-20.
Cause
The threshold value for notifying disk space insufficient (two methods: specify % or size of the rest space) has not been entered. Either method can be omitted.
Resolution
Please enter the threshold value for notifying disk space insufficient (specify % or size of the rest space).
Cause
A value out of the range from 1 to 20 has been entered in the threshold value for notifying disk space insufficient (% specified).
Resolution
Please enter a value within 1-20.
Cause
A value out of the range from 100 to 99999 has been entered in the threshold value for notifying disk space insufficient (size of the rest space specified).
Resolution
Please enter a value within 100-99999.
Cause
The input server IP address is incorrect.
Resolution
Please input the correct server IP address.
Cause
The path name of saving target path folder of log batch receiving data is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The path name of command line log saving target path folder is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The path name of the attached data saving target path folder is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The path name of CT uploading module saving target path folder is too long.
Resolution
Please specify the path within 96 bytes.
Cause
Loop back address has been input in the server IP address.
Resolution
Please input the correct server IP address.
Cause
Loop back address has been input in the server IP address.
Resolution
Please input the correct server IP address.
Cause
The authentication user ID will be modified, but no password is entered.
Resolution
When modifying the authentication user ID, please enter the password.
Cause
The input IP address is incorrect.
Resolution
Please input the correct server IP address.
Cause
The path name of E-mail content saving target path folder is too long.
Resolution
Please specify the path within 96 bytes.
Cause
E-mail content saving target path has not been set correctly. Message appears when drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the E-mail content saving target path folder.
Resolution
Please input the folder name of E-mail content saving target path (full path).
Cause
Characters not allowed are used in the E-mail content saving target path folder.
Resolution
Please input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
E-mail content saving target path folder has not been input.
Resolution
Please input E-mail content saving target path folder.
Cause
Under the status of selecting to send one or more E-mail notifications to the administrator, click the settings button in the E-mail recipient settings window in the case where E-mail recipient has not been set.
Resolution
When selecting [Yes] for sending one or more E-mail notifications to the administrator, please set E-mail recipient in the E-mail recipient settings window.
Cause
The path name of saving target path folder of data for fault investigation is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The saving target path of data for fault investigation has not been set correctly. Message appears when drive or folder does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the saving target path of data for fault investigation.
Resolution
Please input folder name in the saving target path of data for fault investigation (full path).
Cause
Characters not allowed are used in the saving target path folder of data for fault investigation.
Resolution
Please input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
The saving target path folder of data for fault investigation has not been input.
Resolution
Please input the saving target path of data for fault investigation.
Cause
The path name of the saving target path folder of command line log for log viewing is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The saving target path folder of command line log for log viewing has not been set correctly. Message appears when drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the saving target path folder of command line log for log viewing.
Resolution
Please input the folder name of the saving target path folder of command line log for log viewing (full path).
Cause
Characters not allowed are used in the saving target path folder of command line log for log viewing.
Resolution
Please input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
The saving target path folder of command line log for log viewing has not been input.
Resolution
Please input the saving target path folder of command line log for log viewing.
Cause
The path name of the saving target path folder of attached data for log viewing is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The saving target path folder of attached data for log viewing has not been set correctly. Message appears when drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the saving target path folder of attached data for log viewing.
Resolution
Please input the folder name of the saving target path folder of attached data for log viewing (full path).
Cause
Characters not allowed are used in the saving target path folder of attached data for log viewing.
Resolution
Please input with the characters allowed again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
The saving target path folder of E-mail content for log viewing has not been input.
Resolution
Please input the saving target path folder of E-mail content.
Cause
The path name of the saving target path folder of E-mail content for log viewing is too long.
Resolution
Please specify the path within 96 bytes.
Cause
The saving target path of E-mail content for log viewing has not been set correctly. Message appears when drive or folder that does not exist is specified.
Resolution
Please set the correct folder name.
Cause
The drive name only is specified in the saving target path of E-mail content for log viewing.
Resolution
Please input the folder name of the saving target path folder of E-mail content for log viewing (full path).
Cause
Characters not allowed are used in the saving target path folder of E-mail content for log viewing.
Resolution
Please input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Please input it correctly.
Cause
The saving target path of E-mail content for log viewing has not been input.
Resolution
Please input the saving target path of E-mail content for log viewing.
Cause
The specified receiving data saving target path and saving target path for log viewing are the same folder.
Resolution
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Please specify other folder.
Cause
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Resolution
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Please specify other folder.
Cause
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Resolution
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Please specify other folder.
Cause
The input E-mail address is incorrect.
Resolution
Please input the correct E-mail address.
Cause
In each output CSV file specifying window, the output file name has not been input.
Resolution
Please input the output file name.
Cause
In each output CSV file specifying window, the input format of the output file is incorrect.
Resolution
Please input drive name, path name and file name correctly.
Cause
In each output CSV file specifying window, characters not allowed are used in the output file name.
Resolution
Please input with the allowed characters again.
Cause
Failed to open the output file.
Resolution
Please confirm whether the output file is correct and then execute again.
Cause
The result log file has not been input.
Resolution
Please input the result log file.
Cause
The output file and the result log file are specified with the same file name.
Resolution
Please specify different file names for the output file and the result log file.
Cause
In each CSV result log file specifying window, the input format of the output file is incorrect.
Resolution
Please input the drive name, path name and file name correctly.
Cause
In each CSV result log file specifying window, characters not allowed are used in the result log file name.
Resolution
Please input with the allowed characters again.
Cause
Failed to open the result log file.
Resolution
Please confirm whether the specified path is correct and then execute again.
Cause
The import file name has not input in the import file specifying window.
Resolution
Please input the import file name.
Cause
The input format of the import file path and file name in the import file specifying window is incorrect.
Resolution
Please input the drive name, path name and file name.
Cause
In the import file specifying window, characters not allowed are used in the import file name.
Resolution
Please input with the allowed characters again.
Cause
Failed to open the import file.
Resolution
Please confirm whether the specified path is correct and then execute again.
Cause
The import file and the result log file are specified with the same file name.
Resolution
Please specify different file names for the import file and the result log file.
Cause
The total length of the file path name and file name you selected might be too long. So when importing, the part exceeding 218 bytes will be deleted.
Resolution
Please confirm the input file name. please specify the total length of the selected folder name and file name within 218 bytes.
Cause
The total length of the file path name and file name you selected might be too long. So when importing, the part exceeding 218 bytes will be deleted.
Resolution
Please confirm the input file name. please specify the total length of the selected folder name and file name within 218 bytes.
Cause
The total length of the file path name and file name you selected might be too long. So when importing, the part exceeding 218 bytes will be deleted.
Resolution
Please confirm the input file name. please specify the total length of the selected folder name and file name within 218 bytes.
Variable Information
%d: specifying range of number of characters in the export file
Cause
In the export file specifying window, the input byte length of the output file name has exceeded 218 bytes.
Resolution
Please set the output file name within 218 bytes.
Variable Information
%d: specifying range of number of characters in the import file
Cause
In the import file specifying window, the input byte length of the output file name has exceeded 218 bytes.
Resolution
Please set the import file name within 218 bytes.
Variable Information
%d: specifying range of number of characters in the result log file
Cause
In the result log file specifying window, the input byte length of the output file name has exceeded 218 bytes.
Resolution
Please set the result log file name within 218 bytes.
Variable Information
%1: the output file name
Cause
It might be caused by the following.
/The output target path folder is writable-prohibited
/The capacity of the output target path drive is insufficient
Resolution
Please execute again after eliminating the causes above.
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
-
Resolution
Please click the [OK] button.
Cause
The system will get trace log.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The system will update DB connection information settings.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The system will update the administrator notification settings.
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The system will update Management Server.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The system will update trace/folder/CT self-version upgrade settings.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%s: name of the file to be overwritten and saved, and this file exists already
Cause
Overwrite the existing file and save the new file.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The system will export the installation settings file.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
The system will add node information.
Resolution
Please decide whether to add.
Cause
The system will update node information.
Resolution
Please decide whether to update.
Cause
The system will delete node information.
Resolution
Please decide whether to delete.
Cause
The system will add user information.
Resolution
Please decide whether to add.
Cause
The system will update the user information.
Resolution
Please decide whether to update.
Cause
The system will delete the user information.
Resolution
Please decide whether to delete.
Cause
Confirmation of password changing.
Resolution
-
Cause
Local node has not been registered. Local node has to be registered for making the function of the server operate normally.
Resolution
Please close the window after registering local node. Besides, when registering local node later, please close the window directly.
Cause
When registering the server classification of local node as “Sub-Level Server”, there is one record of other node. Other node need to be registered for making the server function operate normally.
Resolution
Please select “Root Server” in server classification to register another node, and then close the window. Besides, please close the window directly when logon to other node later.
Cause
When the category of local node is “Sub-Level Server”, please set the category of other node as “Root Server”. To make server function operate well, other illegal node should be deleted.
Resolution
Close the window after deleting other illegal node. When logging on to other node later, please close the window directly.
Cause
When performing data migration, records with incorrect data status are acquired.
Resolution
After one record whose server category is “Root Server” is reserved, close this window. Besides, when logging on to another node later, please close the window directly.
Cause
Try modifying Active Directory Linkage settings, and update the system settings. Active Directory Linkage, after changing the setting from “Not perform” to “Perform”,, the operation of Management Server will change a lot. For example: the information of sub-level Management Server will be replaced as the information of Master Management Server.
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to update the domain information.
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to delete the domain information.
Resolution
To delete, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
When “Perform SMTP Authentication” is not selected, intend to update administrator notification settings.
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to delete the user information.
Resolution
To delete, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%s: record classification with exclusion settings performed
Cause
The records with record classification displayed are performed exclusion settings.
Resolution
When performing the exclusion settings, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%s: record classification with exclusion status removed
Cause
The exclusion status of record with record classification displayed is removed.
Resolution
When removing the exclusion status, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to add the domain information.
Resolution
To add, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Intend to update the domain information.
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Update the system settings, continue?
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Modify the settings of Active Directory Linkage, and prepare performing system settings updating. When modifying Active Directory Linkage from “Yes” to “No”, the domain information set in the “Active Directory Linkage Settings” window will all be deleted. After deleting the domain information, computers linking with this domain will not be managed by this domain. Besides, the department administrator, user information and composition information will be deleted.
Resolution
To update, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
After deleting the access authority of department administrator, intend to update user information.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
In the E-mail recipient settings window, after clicking the [Settings] button, click the [Cancel] button in the administrator notification settings window.
Resolution
To continue, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%1: exported file name
Cause
The existing exported file has been specified.
Resolution
To overwrite, please click the [OK] button. To cancel, please click the [Cancel] button.
Cause
Failed to send inquiry to domain controller, so the computer name and domain name you input cannot be checked.
It might be caused by the following.
The input domain name is incorrect.
DNS settings in network settings of the Management Server are incorrect.
Network name resolution has not been performed.
Resolution
When adding the input computer name and domain name to the domain information, please click the [OK] button. To cancel, please click the [Cancel] button.
When the name up to the first period of the input domain name is different from the NetBIOS name of the domain, click the [Cancel] button, and execute again after excluding the causes.
Cause
Failed to send inquiry to domain controller, so the computer name and domain name you input cannot be checked. It might be caused by the following.
The input domain name is incorrect.
DNS settings in network settings of the Management Server are incorrect.
Network name resolution has not been performed.
Resolution
Please confirm the network status and keep communication with domain controller. When not confirming with domain controller and logon with the current entered value, please click the [OK] button. To cancel, please click the [Cancel] button.
Variable Information
%s: the actual computer name correspondent with the input domain address
Cause
When inquiring the domain address the user input on the Internet, the inquired computer name is different from that input by the user. This might be caused by the following.
The input computer name is incorrect.
Active Directory Server consists of multiple ones, the result of the accessed server is different from the computer name input by the user.
Resolution
When updating the domain information according to the input computer name and domain name, please click the [OK] button. To cancel, please click the [Cancel] button.
When the name up to the first period of the input domain name is different from the NetBIOS name of the domain, click the [Cancel] button, and execute again after excluding the causes.
Variable Information
%s: the actual computer name correspondent with the input domain address
Cause
When inquiring the input domain address on the Internet, the inquired computer name is different from that input by the user. This might be caused by the following.
The input computer name is incorrect.
Active Directory Server consists of multiple ones, the result of the accessed server is different from the computer name input by the user.
Resolution
If the input computer name is incorrect, please input correctly. Besides, in the case of the computer name specified, Active Directory Linkage command will access data in the inputting computer.
If there are multiple Active Directory Servers, and it is OK to access all Active Directory Servers, please logon without inputting in the computer name. If the computer name is blank, Active Directory Linkage command will confirm the computer name automatically and access data during execution.
When logon directly, please click the [OK] button. To cancel, please click the [Cancel] button.
