1.25.1 Modify Server IP Address

Functional Specification

Modify the IP address of (Master) Management Server

Command Format

FSW11EJ7.EXE <Password> /C /I <IP address of (Master) Management Server after modification> [<IP address of backup (Master) Management Server after modification>] [/Silent]

Option

<Password>:: Enter the password specified during installation of the client (CT).

/C:: Perform change of settings.

/I:: Specify the IP address to be modified.

<IP address of (Master) Management Server after modification>:: Enter the IP address of (Master) Management Server to which the client (CT) is connected.

<IP address of backup (Master) Management Server after modification>:

Specify IP address of backup Management Server when inquiring user policy.

When omitted, set a value that is same as “IP address of (Master) Management Server after modification”.

/Silent:

It is the option that is effective in the OS of Windows Vista® or higher. It can avoid displaying the following message after command execution.

Press any key to continue...

Return Value

0:: [Fixed Value]

Location for Saving Commands

When executing on the PC in which the OS is Windows Server® 2008 64-bit edition, Windows Server® 2008 R2, Windows Vista® 64-bit edition or Windows® 7 64-bit edition

%SystemRoot%\SYSWOW64\FSW11EJ7.EXE

When executing on the PC in which the OS is other than Windows Server® 2008 64-bit edition, Windows Server® 2008 R2, Windows Vista® 64-bit edition or Windows® 7 64-bit edition

%SystemRoot%\system32\FSW11EJ7.EXE

*%SystemRoot% is usually C:\Windows.

Authority Required for Execution/Execution Environment

Please execute with a user that belongs to the Administrator group of the local computer or a user that belongs to the Domain Admins group of the domain.
Please execute on the client (CT).

Notes

When executing this command from the command prompt, the password may be viewed by a third party or end user. Therefore, please perform operations by considering security so that the password will not be viewed by any means when using this command.
When executing on the PC in which the OS is Windows Server® 2008 64-bit edition, Windows Server® 2008 R2, Windows Vista® 64-bit edition or Windows® 7 64-bit edition, please execute after specifying with full path or modify the current folder to %SystemRoot%\SYSWOW64.

Example of Use/Execution Results/Output Format

C:\>fsw11ej7.exe password /C /I 192.168.1.1 192.168.1.2
192.168.1.1:  IP address of new server
192.168.1.2:  new IP address of server (Backup Management Server)
E701-INF001] The command has ended.