Log information table
The saving target table of the E-mail file attachment prohibition log will be modified if any of the following conditions are met.
・The policy of confirming recipient address during E-mail Sending is not applied.
・V12.0L20-V13.0.0 compatible format is used.
V14.0.1 or Earlier | V14.1.0 |
|---|---|
COMMONLOG3 (Common Log 3) | COMMONLOG1 (Common Log 1) |
The content of the saving target table of the device configuration change log is modified.
V13.3.0 or Earlier | V14.0.0 |
|---|---|
COMMONLOG1 (Common Log 1) | COMMONLOG3 (Common Log 3) |
Configuration change log
The content output by DTKSTCV.EXE (output configuration change log) command is modified.
The following information output during Log Viewer operation will not be output during the operation in Web Console:
Operation computer name
Operation logon user ID
Operation logon domain name
In the log with the password modification error, the error resulting from the password not entered will not be recorded.
In [Operation Category] of a CSV file output item, the following contents are modified:
“2011: save detailed screen capture image of log” and “2112: when Log Viewer trace is modified” cannot be output.
“2014: command log search” is contained in the record of “2013: log search”.
Database (DBMS)
Modify the database (DBMS) as follows.
A DBMS (database management system) is modified as a unique DBMS (product built-in) from a Microsoft® SQL Server 2000.
As the modification of DBMS occurs, modifications also occur to the search result of the Log Viewer.
In the search result, hiragana and katakana are processed as special characters. (In V12, they are processed as the same characters.)
In the search result, multi-byte and single-byte alphanumeric characters are processed as special characters. (In V12, they are processed as the same characters.)
Server settings tool
Modify the server settings tool as follows.
The “Maximum Number of CT Simultaneous Connections” (internal configuration value) during the communication between the Management Server and Client (CT) is modified from “180” to “100”.
“Management Server Settings” window
The Server IP address is displayed only, so there is no need to set this in the Management Server settings window.
The Server IP address is set in the “Server Information Settings” window.
The input unit of [Connection Timeout Value between Servers] of [Communication Settings] is modified from “millisecond” to “second”.
According to this modification, because the entered value is “1-999” second(s), the upper limit of the entered value is modified from “999999 milliseconds” to “999000 milliseconds”.
The following items set in the “Communication Settings” window are missing:
Communication retry times between servers
It is fixed as “1” internally.
Communication retry times between CT-Server
It is fixed as “3” internally.
Maximum number of CT simultaneous connections
It is fixed as “100” internally.
“Administrator Notification Settings” window
Unify the displayed items of the event log and items notified to the administrator by E-mail.
Active Directory Linkage command
When UNICODE characters are contained in the OU name and user ID (UserPrincipalName), modify the operation as follows.
V13.2.1 or Earlier | V13.3.0 |
|---|---|
After converting UNICODE characters as single-byte “?”, import it as the group and user information of Systemwalker Desktop Keeper. | OU name and user ID (UserPrincipalName) containing UNICODE characters are not imported. |
When transferring from V13.2.0 to V13.3.0, by executing the initial Active Directory Linkage command, the imported OU name and user ID containing UNICODE characters will be removed from Systemwalker Desktop Keeper.
However, in the user information of Active Directory, even if “User ID”, “Employee Number”, “Post Name”, “Section Name”, “Position Code” which have been imported to Systemwalker Desktop Keeper contain UNICODE characters, they will be imported after the characters are converted to “?”.
Backup command
Modify the CSV file of the output operation log.
V13.3.0 or Earlier | V14.0.0 |
|---|---|
The “Remarks” column is blank. | Set the following values in the “Remarks” column of Device configuration change log.
|
The following commands are modified as the commands of V12L10 BE~V12L20 SE. Commands of V13.0.0 or later are the same.
| V12L10 BE | V12L20 BE | V12L20 SE | V13.0 BE/SE | V13.2 BE/SE | V13.3 BE/SE | V14.0.0 |
|---|---|---|---|---|---|---|---|
Backup Management Information | DTKMSTB1.BAT | DTKMSTB3.AT | DTKMSTB4.BAT | DTKMSTB.EXE | ← | ← | ← |
Backup Log Information | DTKLGTB1.BAT | DTKLGTB3.AT | DTKLGTB4.BAT | DTKLGTB.EXE | ← | ← | ← |
Output Viewing Log One by One | DTKLG1T1.BAT | DTKLG1T3.AT | DTKLG1T4.BAT | DTKLG1T.EXE | ← | ← | ← |
Log Deletion | DTKDELR1.BAT | DTKDELR3.BAT | DTKDELR4.BAT | DTKDELR.EXE | ← | ← | ← |
Collective Output of Viewing Log | DTKLGAT1.BAT | DTKLGAT3.BAT | DTKLGAT4.BAT | DTKLGAT.BAT | ← | ← | ← |
Backup/Delete Log Information | DTKBKDL1.BAT | DTKBKDL3.BAT | DTKBKDL4.BAT | DTKBKDL.BAT | ← | ← | ← |
Collectively Output/Delete the Backup/Viewing Log of Log Information | DTKCVDL1.BAT | DTKCVDL3.BAT | DTKCVDL4.BAT | DTKCVDL.BAT | ← | ← | ← |
Calculate the Past Date | DTKBFDAY.BAT | ← | ← | DTKBFDM.EXE | ← | ← | ← |
Modify Error Level as an Arbitrary Value | DTKELSET.BAT | ← | ← | ← | ← | ← | ← |
Number Check | DTKNUMCK.BAT | ← | ← | ← | ← | ← | ← |
The backed-up CSV data is changed from being separated by label to being separated by comma.
Drive type
As the judgment that a hardware device can be popped up is modified, the drive type of “File Export Log”, “Device configuration change Log” and “File Operation Log” will also be modified.
Add item of log list
Add [Additional] to item of log list of the Log Viewer. According to this item, whether or not there is attached data can be confirmed. As the item is added, the CSV output result of the log list will also be modified.
Operating Environment Maintenance Wizard (Constructing and Deleting the Environment)
The tool name is modified from “Desktop Keeper DB Environment Construction and Deletion Tool” as “Operating Environment Maintenance Wizard (Constructing and Deleting the environment)”.
Thus, the shortcut name and the message will also be modified.
Operating Environment Maintenance Wizard (Display and Reconstruction Information)
The tool name is modified from “Desktop Keeper DB Information Display and Reconstruction Tool” as “Operating Environment Maintenance Wizard (Display and Reconstruction Information)”.
At the same time, the shortcut name and the message will also be modified.
