The names of the SNMP Communities which Manager uses for the managed devices and their SNMP transmissions is specified during device registration or set with the setting file (sanma.conf). The defaults for the managed devices' SNMP Community names are as follows.
Transmission destination device | Default | Access | Method of settings |
|---|---|---|---|
Fibre channel switch | public | read | Refer to "4.2.1.1 Setting" for detailed settings. |
private | read/write | ||
SN200 MDS(Cisco MDS) Fibre Channel switch | public | read | Refer to "4.2.4.1 Settings" for detailed settings. |
McDATA Fibre channel switch | public | read | Refer to "4.2.5.1 Settings" for detailed settings. |
Disk Storage System | public | read | Refer to "4.3.1.1 Setting" for detailed settings. |
Information
For changing the community name to use, change it by referring to "SNMP_COMMUNITY_NAME_FOR_IP" of "A.2 sanma.conf Parameter".However, it is also possible to change the SNMP Community name from the Web Console if the device for which you are changing the SNMP Community name is an ETERNUS Disk storage system.
