In order to manage ETERNUS Disk storage system using Express, it is necessary to configure ETERNUS Disk storage system in advance.
Please set up the following item by using the ETERNUS Web GUI.
For more information, refer to the ETERNUS Web GUI manuals.
Check the IP address of the Management Server.
When the Management Server exists in a different subnet from where ETERNUS Disk storage system belongs, make sure that the IP address of the Management Server is registered in "Access permission list for outside of the subnet" on "Setup environment for network" screen. If it is not registered, register it.
Enable the SNMP function of MNT port on the "Setup SNMP Agent" screen.
Check the ETERNUS Disk storage system names displayed in the "Name" column on the "Modify Storage System Name" screen.
When using Advanced Copy functions, specify 16 or less alphanumeric characters for ETERNUS Disk storage system name.
When you connect iSCSI, specify "Enable" the use of iSNS server in the target port.
For ETERNUS DX80 S2/DX90 S2, in addition to the above, please execute the following settings:
Create a new SSH server key.
In the ETERNUS Web GUI "Create SSH Server Key" screen, create a new SSH server key. The number of bits for the key is at your discretion.
Create a Software Role Account with the account information in the ETERNUS Web GUI "Setup User Account" screen.
Use this account information during the remaining of the procedure.
If a SNMP community name is not already set for ETERNUS Disk storage system, create the SNMP community name in the "Setup SNMP Community" screen in the ETERNUS Web GUI.
Note
Make sure to logout from the ETERNUS Web GUI if the setting up is completed.
