Restore the resources of this product. Execute the command shown below.
Refer to "1.8.12 rcxmgrrestore" of the "Reference Guide (Resource Management) CE" for information on the command.
>Installation_folder\SVROR\Manager\bin\rcxmgrrestore -dir directory <RETURN>
# /opt/FJSVrcvmr/bin/rcxmgrrestore -dir directory <RETURN>
Restore image management information
If the following image management information that was saved at backup has been changed, reset it:
Number of stored snapshot generations
In value, specify the number of stored generations that were saved at backup.
>Installation_folder\SVROR\Manager\bin\rcxadm imagemgr set -attr vm.snapshot.maxversion=value <RETURN>
# /opt/FJSVrcvmr/bin/rcxadm imagemgr set -attr vm.snapshot.maxversion=value <RETURN>
Refer to "5.5 rcxadm imagemgr" of the "Command Reference" for information on the rcxadm imagemgr command.
Note
If the execution of the command fails, check if the admin server has multiple IP addresses. If it has, refer to "2.1.4 Setup" in the "Installation Guide CE", and perform the procedure of the note "When configuring an environment on the admin server with multiple IP addresses, use the following procedure before initiating setup.".
