3.7.1 Common Messages

The following section describes the common messages output when operating management ledger and AC menu.

%s is not specified.

Variable Information

%s: input field name

Type

Error

Cause

The required input field is not specified.

Process

Please specify the string for the contents displayed in input field name.

The entered %s has been registered.

Variable Information

%s: input field name

Type

Error

Cause

The specified asset number has been registered. In addition, when the device is PC, the specified [User IS] and [Device Name] have been registered.

Process

Please specify the correct asset number, or delete the corresponding devices that have registered the asset number. In addition, when the device is PC, please specify the correct [User ID] and [Device Name], or delete the corresponding devices that have registered [User ID] and [Device Name].

%s1 has not Permitted %s2.

Variable Information

%s1: input field name

%s2: prohibited string

Type

Error

Cause

The strings that cannot be specified are used.

Process

Please specify correct string for the contents displayed in input field name.

%s1 can be Entered in %s2 byte.

Variable Information

%s1: input field name

%s2: string length that can be specified

Type

Error

Cause

The string length of specified input field has exceeded the byte that can be specified.

Process

Please specify within correct string length scope for the contents displayed in input field name.

%s is incorrect value.

Variable Information

%s: input field name

Type

Error

Cause

The characters that cannot be specified are used.

Process

Please specify correct characters for the contents displayed in input field name.

%s can be entered to %d byte of Single-byte.

Variable Information

%s: input field name

%d: string length that can be single-byte specified

Type

Error

Cause

The specified input field can only specify single-byte and has exceeded the string length that can be specified.

Process

Please confirm the contents specified in input field, and specify the correct data and then execute again.

The multi-byte characters cannot be used in %s.

Variable Information

%s: input field name

Type

Error

Cause

The multi-byte characters are specified in the input field where single-byte can be specified only.

Process

Please confirm the contents specified in input field, and specify the correct data and then execute again.

%s Please specify a numeral greater than 0 by single-byte.

Variable Information

%s: input field name

Type

Error

Cause

The input field can only be specified with single-byte numerals.

Process

Please confirm the contents specified in input field, and specify the correct data and then execute again.

%s1 can be entered to %s2 digits.

Variable Information

%s1: input field name

%s2: string length that can be single-byte specified

Type

Error

Cause

The input field can be specified with multi-byte or single-byte, but it has exceeded the string length that can be specified.

Process

Please confirm the contents specified in input field, and specify the correct data and then execute again.

%s Not selected.

Variable Information

%1: not selected item domain

Type

Error

Cause

The window transition operation has been performed, but the item (cell) that supports this operation is not selected.

Process

Please select the item (cell) that supports the operation and then execute again.

%s1 Please enter the date later than %s2.

Variable Information

%s1: input field name (relating date)

%s2: input field name (relating date)

Type

Error

Cause

The date information of specified input field in %s1 cannot specify a value earlier than the date information of input field in %s2.

Process

Please confirm the contents specified as date information, and specify the correct data and then execute again.

Please enter %s within the range from year 1970 to year 2050.

Variable Information

%s: input field name (relating date)

Type

Error

Cause

The date scope of input field in %s is specified incorrectly.

Process

Please confirm the contents specified as date information, and specify the correct data and then execute again.

The entered %s date is incorrect.

Variable Information

%s: input field name (relating date)

Type

Error

Cause

The date information of specified input field in %s is incorrect.

Process

Please confirm the contents specified as date information, and specify the correct data and then execute again.

Multiple lines are selected. Please select one line only.

Type

Error

Cause

The window transition operation is performed, but multiple lines are selected in the item (cell) where only one line can be selected.

Process

Please modify the selected item (cell) as one line and then execute again.

The date exceeding the system time has been set in the stocktaking start date. Please set the date earlier than the system time in the stocktaking start date, or adjust the system time.

Type

Error

Cause

The specified date scope, exceeding the stocktaking start date, has been set.

Process

The date, 180 days (half a year) earlier and later than current date, cannot be set in the stocktaking start date. Please set a value that can be specified.

Failed to connect to the database.
%s

Variable Information

%s: error message information output by Symfoware

Type

Error

Cause

An error occurred when accessing to the database.

Process

Please perform the action according to the output error message.
In addition, as variable information, the error messages output by Symfoware are as follows:

[SymfoWARE ODBC Driver] JYP1010E The server connection requirement is denied.
For the resolution, please confirm the connected target environment, and confirm whether the port number matches, or whether the service of database has not been stopped.
[SymfoWARE ODBC Driver] JYP1021E An error occurred in the system call. function="connect"errno="10065"
For the resolution, please confirm whether AC is connected to the network.
[SymfoWARE ODBC Driver] JYP1008U “Specified Connected Target Server Name” does not exist in the host name of host name management files.
For the resolution, please confirm whether CS has existed in the network.
[SymfoWARE ODBC Driver] JYP1087U The unidentified protocol is received when confirming the connection.
For the resolution, please confirm whether other products are using the specified port number.

An exception occurred in the operating environment. Please reinstall. Details (%s)

Variable Information

%s: detailed information of abnormal environment

Type

Error

Cause

An exception occurred in the operating environment.

Process

Please reinstall AC after confirming the abnormal contents of environment.

The function has been already started..

Type

Error

Cause

The specified function has been started.

Process

Please execute the started function.

User ID or password does not match.

Type

Error

Cause

An error occurred in the user ID or password.

Process

Please execute again after confirming the configuration value of user ID or password.

There is no authority for executing this function. Please log on after specifying a user ID that can be executed.

Type

Error

Cause

The specified user does not have the authority for using AC menu.

Process

Please execute again after confirming the configuration value of user ID or password.

The entered %s has not been registered.

Variable Information

%s: input field name

Type

Error

Cause

The information for the input item has not been registered. In addition, when the section administrator is registering/modifying the device information, the user ID affiliated section has not been specified.

Process

Please execute again after confirming the contents specified in the input field.

The selected %s has been deleted.

Variable Information

%s: input field name

Type

Error

Cause

The displayed information has been deleted by other AC menu users.

Process

Please select at least one search condition when searching.

Type

Warning

Cause

No search condition is specified in the setup window where to set screening conditions.

Process

Please search again after specifying the search condition.

The maximum displayed number has been exceeded and the display processing will be terminated.

Type

Error

Cause

The number of devices to be displayed once has exceeded 50,000.

Process

Please display the window again after modifying the display unit or screening device information.

The stocktaking start date cannot be set to exceed the end day of stocktaking.

Type

Error

Cause

The end day of stocktaking is set to be earlier than the stocktaking start date.

Process

Please set the end day of stocktaking later than the stocktaking start date.

The device information of affiliated section can be modified.

Type

Error

Cause

The administrator prepares to modify the device information of non-affiliated section.

Process

Please execute again after confirming the modified device information.

The selected device cannot be viewed.

Type

Error

Cause

The administrator prepares to view the device information of non-affiliated section.

Process

Please execute again after selecting the device of affiliated section.

%1 does not set one item.

Variable Information

%1: input field name (Example: auditing pointer, auditing item)

Type

Error

Cause

The input field specified in %1 does not select one item.

Process

Please select the input field of %1, and execute again after specifying the correct data.

An exception occurred in the system. Please contact the system administrator.

Type

Error

Cause

An error occurred in the system on Desktop Patrol CS.

Process

Please confirm the status of the network and Systemwalker standard database. If the error is still existing, please contact the system administrator of Desktop Patrol CS.

Database access error occurred.
%1

Variable Information

%1: error message information output by Symfoware

Type

Error

Cause

An error occurred when accessing to the database.

Process

Please perform the action that is instructed in the output error message.
In addition, as variable information, the error messages output by Symfoware are as follows:

[SymfoWARE ODBC Driver] JYP1010E The server connection requirement is denied.
For the resolution, please confirm the connected target environment, and confirm whether the port number matches, or whether the service of database has not been stopped.
[SymfoWARE ODBC Driver] JYP1021E An error occurred in the system call.
function="connect"errno="10065"
For the resolution, please confirm whether AC is connected to the network.
[SymfoWARE ODBC Driver] JYP1008U “Specified Connected Target Server Name” does not exist in the host name of host name management files.
For the resolution, please confirm whether CS has existed in the network.
[SymfoWARE ODBC Driver] JYP1087U The unidentified protocol is received when confirming the connection.
For the resolution, please confirm whether other products are using the specified port number.

Two or more items have been set for input setup place.

Type

Error

Cause

In the specified setup place, the building management information has specified more than two registered building names.

Process

Please specify more than two registered building names again in the building management information, or execute again after specifying other setup place.

The characters starting from %2 cannot be used in %1.

Variable Information

%1: input field name (Example: asset number)

%2: prohibited string

Type

Error

Cause

The strings not allowed are specified in the beginning characters of specified input field.

Process

For the contents displayed in the input field name, please execute again after specifying the beginning characters as allowed string.

%1 and %2 are duplicated.

Variable Information

%1: belong to domain name (Example: IP address, MAC address 1)

%2: belong to domain name (Example: IP address, MAC address 2)

Type

Error

Cause

The values of two specified input fields are specified as the same value.

Process

For the contents displayed in the input field name, please execute again after specifying a different value.

Failed to register as the registration upper limit %1 (%2) has been exceeded.

Variable Information

%1: input field name

%2: registration upper limit

Type

Error

Cause

Prepare to register when exceeding the registration upper limit of specified input field.

Process

The device specified in %1 has been related to other devices.

Variable Information

%1: input field name (Example: related asset number)

Type

Error

Cause

In the input field, the device specified as related device for other devices has been specified.

Process

Please specify correct string for the contents displayed in input field name.

It is a device set in %1, and %2 cannot modify it.

Variable Information

%1: input field name (Example: related asset number)

%2: input field name (Example: asset number, related asset number)

Type

Error

Cause

Prepare to modify the asset number or related asset number of devices set as related devices for other devices

Process

Please modify the related asset number of device whose related device will be modified from object device. After that, please modify the asset number and managed asset number of device whose object has been modified.

%s contains environment dependent characters. Please reset.

Variable Information

%s: input field name

Type

Error

Cause

The environment-dependent characters have been specified.

Process

Please execute again after confirming the input value.

Please use the network path or URL to specify %s.

Variable Information

%s: specify the path name of link target

Type

Error

Cause

The network path and URL path are not specified.

Process

Please execute again after specifying the network path or URL.

The required option is not specified. -- %s

Variable Information

%s: option name

Type

Error

Cause

The required option is not specified when executing the command.

Process

Please execute the command after specifying the required option,

The following options require parameters. -- %s

Variable Information

%s: option name

Type

Error

Cause

The parameter corresponding to the option is not specified when executing the command.

Process

Please execute the command after specifying the parameter corresponding to the option.

The length of the following option value is incorrect. -- %s

Variable Information

%s: option name

Type

Error

Cause

When executing the command, the string length specified in the option has exceeded the length range.

Process

For the parameter of option, please specify correct string within invalid length scope and execute the command.

The incorrect option is specified.

Type

Error

Cause

The incorrect option is specified when executing the command.

Process

Please specify the correct option, and execute it again.

An error occurred when deleting the management ledger.
(Details: %s)

Variable Information

%s: error message information output by Symfoware

Type

Error

Cause

An error occurred when accessing to the database.

Process

Please perform the action according to the output error message.

The automatic collection value cannot be got.
(Details: %s)

Variable Information

%s: error message information output by Symfoware

Type

Error

Cause

An error occurred when accessing to the database.

Process

Please perform the action according to the output error message.

An error occurred when initializing the automatic collection information.
(Details: %s)

Variable Information

%s: error message information output by Symfoware

Type

Error

Cause

An error occurred when accessing to the database.

Process

Please perform the action according to the output error message.