This section explains the 679XX message series.
[Description]
A timeout error occurred during execution of the command.
[Corrective Action]
Collect troubleshooting information and contact Fujitsu technical staff.
[Description]
An internal error occurred during execution of the command.
[Corrective Action]
This message may be output after execution of the rcxadm command is cancelled by pressing "Ctrl+C".
As cancellation has been successful, there is no need to take corrective action.
When this message is displayed by executing the command for obtaining the troubleshooting information, note down the displayed message and contact Fujitsu technical staff.
Resource Coordinator VE may have been installed in the wrong location.
For the installation location for managers, refer to "2.1.2 Installation [Windows]" of the "ServerView Resource Coordinator VE Installation Guide", for the installation of agents refer to "2.2.2 Installation [Windows/Hyper-V]" of the "ServerView Resource Coordinator VE Installation Guide", and reinstall using the correct paths.
When details is "Service control timeout. service_name=Resource Coordinator Manager". [Windows]
Check that the SNMP Trap Service, which is required software for managers, has been configured correctly.
For details on the configuration, refer to "2.1.1.1 Software Preparation and Checks" of the "ServerView Resource Coordinator VE Installation Guide".
If this does not resolve the problem, collect troubleshooting information and contact Fujitsu technical staff.
