This section explains the 656XX message series.
[Description]
Registration of a managed server has not been completed successfully. The managed server has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a managed server has not been completed successfully. The managed server has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Settings of maintenance mode have not been completed successfully. The managed server has not been placed into maintenance mode.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Release from maintenance mode has not been completed successfully. The managed server has not been released from maintenance mode.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Application of VM Home Position settings failed. VM Home Position settings have not been applied.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Migration of VM guests to VM Home Positions failed. VM guests have not been migrated to VM Home Positions.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Clearing of VM Home Position settings failed. VM Home Position settings have not been cleared.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
There is no WWN information configured on managed server.
[Corrective Action]
Configure WWN information on managed server.
[Description]
The WWN information configuration on managed server1 and managed server2 is not consistent.
[Corrective Action]
Check if the port number of the WWN information configured for managed server1 corresponds with that of managed server2.
[Description]
Addition and deletion of zoning cannot be performed at the same time.
[Corrective Action]
Check that the content of the entered WWN information is correct.
If they are correct, perform addition after deleting the zoning information for managed server.
If the WWN information is not correct, correct the information, and then perform the operation again.
[Description]
Configuration or deletion of zoning information failed, as the power status of managed server is not power status.
[Corrective Action]
When the power status value is OFF, perform the operation again after stopping the managed server.
When the power status value is ON, perform the operation again after starting the managed server.
[Description]
The zoning information of managed server has already been configured.
[Corrective Action]
Check if primary servers, fibre channel switches, and storage units on ESC are registered in the correct status.
When managed server is a spare server, delete the zoning information.
[Description]
The zoning information of managed server has not been configured.
[Corrective Action]
Check if primary servers, fibre channel switches, and storage units on ESC are registered in the correct status.
When managed server is a primary server, configure the zoning information, fibre channel switch zoning, and storage unit host affinity.
[Description]
Backup of a system image has not been completed successfully. The system image has not been backed up.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Restoration of a system image has not been completed successfully. The system image has not been restored.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Configuration of spare server information has not been completed successfully. The spare server information has not been configured.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Continuation of a spare server has not been completed successfully. Continued use of the spare server is not possible.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Failback to the recovered managed server from the spare server has not been completed successfully. Failback to the recovered managed server from the spare server has not been performed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Switching of the managed server with the spare server has not been completed successfully. Switching of the managed server and the spare server has not been performed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of a chassis has not been completed successfully. The chassis has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a chassis has not been completed successfully. The chassis has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of a LAN switch has not been completed successfully. The LAN switch has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of the agent has not been completed successfully. The agent has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a LAN switch has not been completed successfully. The LAN switch has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Setting changes of a managed server have not been completed successfully. The settings of the server have not been changed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Setting changes of a LAN switch have not been completed successfully. The settings of the LAN switch have not been changed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Configuration and setting changes of the HBA address rename information for the server have not been completed successfully. The HBA address rename information has not been configured or changed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
The settings and setting changes of the network information for the server have not been completed successfully. The network information has not been set or changed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Power on of a managed server has not been completed successfully. The server has not been powered on.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Power off of a managed server has not been completed successfully. The server has not been powered off.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Forced power off of a managed server has not been completed successfully. The server has not been powered off.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Reboot of a managed server has not been completed successfully. The server has not been rebooted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Forced reboot of a managed server has not been completed successfully. The server has not been rebooted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Turning on or flashing of a maintenance LED has not been completed successfully. The maintenance LED has not been turned on or is not flashing.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Stopping the flashing of a maintenance LED has not been completed successfully. Flashing of the maintenance LED has not been stopped.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Restoration of a LAN switch has not been completed successfully. The LAN switch has not been restored.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Obtaining a cloning image has not been completed successfully. The cloning image has not been obtained.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deployment of a cloning image has not been completed successfully. The cloning image has not been deployed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a system image has not been completed successfully. The system image has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a cloning image has not been completed successfully. The cloning image has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of a user account has not been completed successfully. The user account has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Changing of a user account has not been completed successfully. The user account has not been changed.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a user account has not been completed successfully. The user account has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Modification of chassis settings has not been completed successfully. The settings of the chassis have not been modified.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
The re-configuration of hardware properties failed. The hardware properties have not been re-configured.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of a power monitoring device has not been completed successfully. The power monitoring device has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of a power monitoring device has not been completed successfully. The power monitoring device has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Modification of power monitoring device settings has not been completed successfully. The settings of the power monitoring device have not been modified.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Export of environmental data has not been completed successfully. The environmental data has not been exported.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
When no detailed message is displayed, reduce the number of resources specified to 80 or less, and then perform the operation again.
[Description]
Authentication of the target resource was not completed successfully. The entered login account information is not correct.
[Corrective Action]
Enter the correct user name and password for the target resource. Also, check that the admin network settings of the target resource have been configured correctly.
When either "Message number 67359" or "Message number 69115" are displayed in a dialog, check the number of the message and contact Fujitsu technical staff.
When no detailed message is displayed, check the operating status and settings of the manager and the target resource.
[Description]
Setting of VM host login account information has not been completed successfully. The login account information of the VM host has not been modified.
[Corrective Action]
Check the operating status and settings of the VM host. Also, check that the admin network settings of the target resource have been configured correctly.
[Description]
Execution of the VM management software is not supported for the selected resource. The VM management software has not been started.
[Corrective Action]
No action is required.
[Description]
A web browser that is not supported by Resource Coordinator VE is being used. The VM management software has not been started.
[Corrective Action]
Start the VM management software using a web browser supported by Resource Coordinator VE.
[Description]
A client OS that is not supported by Resource Coordinator VE is being used. The VM management software has not been started.
[Corrective Action]
Start the VM management software using a client OS supported by Resource Coordinator VE.
[Description]
Downloading of the java policy configuration file has not been completed successfully. The java policy configuration file has not been downloaded.
[Corrective Action]
Check the operating status and settings of the VM host.
[Description]
Configuration of external software has not been completed successfully. The settings of the external software will not be changed.
Information regarding external software such as VIOM is displayed for %1.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Settings of VM management software have not been completed successfully. The settings of the VM management software will not be changed.
[Corrective Action]
Check the settings of the VM management software.
[Description]
Discovery of LAN switches has not been completed successfully. LAN switches have not been discovered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Collection of physical link information of LAN switches ended abnormally.
Physical link information of LAN switches has not been obtained.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Migration of the VM guest failed.
The VM guest has not been migrated.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of subnet information has not been completed successfully. The subnet information has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Registration of subnet information has not been completed successfully. The subnet information has not been registered.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Deletion of the subnet information has not been completed successfully. The subnet information has not been deleted.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Configuration of monitoring information has not been completed successfully. The monitoring information has not been configured.
[Corrective Action]
Check the message number displayed in the details of the dialog and take corrective action.
[Description]
Configuration of WWN information failed.
[Corrective Action]
Check if primary servers, fibre channel switches, and storage units on ESC are registered in the correct status, and if different operations are being performed on the primary server.
