This section explains the 413XX message series.
[Description]
The status of the managed server server_name has been changed to status.
"warning" is displayed for status.
[Corrective Action]
Locate the fault using the RC console.
For operation from the RC console, refer to "Chapter 2 User Interface" of the "ServerView Resource Coordinator VE Setup Guide".
[Description]
The status of the type resource name has been changed to status.
"warning" or "unknown" is displayed for status.
[Corrective Action]
Locate the fault using the RC console.
When type is "LAN switch"
The admin server cannot communicate correctly with the management blade or the device name. Check that the network cable is correctly connected and the network settings are correct.
For operation from the RC console, refer to "Chapter 2 User Interface" of the "ServerView Resource Coordinator VE Setup Guide".
[Description]
The admin server has detected that the NIC used for the admin LAN on the managed server server has been switched.
The name of the managed server is displayed for server.
[Corrective Action]
If necessary, investigate the cause of the switching of the NIC on the managed server and take corrective action.
