This section explains the 211XX message series.
[Description]
The status of the server server_name has been changed to status.
status can be the following statuses: "normal", "stop", and "unknown".
The name of the server is displayed for server_name.
[Corrective Action]
Check the status of the server server_name has been changed to status. When the status is "normal", or "stop" (after operations to stop the server have been performed), no action is required.
In any other cases, locate the fault using the RC console.
For operation from the RC console, refer to "Chapter 2 User Interface" of the "ServerView Resource Coordinator VE Setup Guide".
[Description]
Registration of the managed server server_name has been completed successfully.
[Corrective Action]
No action is required.
[Description]
A manager has been started.
[Corrective Action]
No action is required.
[Description]
A manager has been stopped.
[Corrective Action]
No action is required.
[Description]
A service has been started.
The service name started is displayed for service_name.
[Linux]
The PxeMtftp message of the HBA address rename setup service is not output.
[Corrective Action]
No action is required.
[Description]
A service has been stopped.
The service name stopped is displayed for service_name.
[Linux]
The PxeMtftp message of the HBA address rename setup service is not output.
[Corrective Action]
No action is required.
[Description]
An agent has been started.
[Corrective Action]
No action is required.
[Description]
An agent has been stopped.
[Corrective Action]
No action is required.
[Description]
Checking of detail failed because of insufficient information.
When detail is "model check"
This message is displayed when an admin file is not backed up as given in "Appendix B Admin Server Backup and Restore" of the "ServerView Resource Coordinator VE Operation Guide", or when a restoration fails as a consequence of loss or corruption of the backup admin file.
[Corrective Action]
No action is required.
[Description]
The processing of operation has been started.
The operation name is displayed for operation.
[Corrective Action]
No action is required.
[Description]
The processing of operation has been completed.
The operation name is displayed for operation.
[Corrective Action]
No action is required.
[Description]
The processing of operation has been cancelled.
The operation name is displayed for operation.
[Corrective Action]
No action is required.
[Description]
The status of the type resource name has been changed to status.
status can be the following statuses: "normal", "stop", and "unknown".
[Corrective Action]
Check the status of the type resource name that has changed to status. When the status is "normal", or "stop" (after operations to stop the resource have been performed), no action is required.
In any other cases, locate the fault using the RC console.
For operation from the RC console, refer to "Chapter 2 User Interface" of the "ServerView Resource Coordinator VE Setup Guide".
[Description]
Deletion of the managed server server_name has been completed successfully.
[Corrective Action]
No action is required.
[Description]
Registration of the agent has been completed successfully.
[Corrective Action]
No action is required.
[Description]
Deletion of the agent has been completed successfully.
[Corrective Action]
No action is required.
[Description]
image has been deployed on the managed server server_name.
When deployment is performed simultaneously on multiple servers, multiple names will be displayed for server_name.
[Corrective Action]
No action is required.
[Description]
The operation operation will be performed for the server OS server_os_name.
One of the following is displayed for operation:
switchover
failback
For switchover, the name of the primary server is displayed for server_name1, and the name of the spare server for server_name2.
For failback, the name of the spare server is displayed for server_name1, and the name of the primary server for server_name2.
[Corrective Action]
No action is required.
[Description]
The operation displayed for detail has already been performed.
"Encryption of activation.dat" is displayed for detail.
The password in the license information file has already been encrypted.
[Corrective Action]
No action is required.
[Description]
The processing of the function for obj has been aborted.
The reason the processing of function was aborted is displayed for detail.
When detail is "hardware maintenance mode"
The processing of the function was aborted because obj is in hardware maintenance mode.
When detail is "Reserved SB"
Function was aborted because obj's Reserved SB has been set.
[Corrective Action]
No action is required.
[Description]
A VM guest has been detected.
The server name of the VM guest is displayed for obj.
"VMguest" is displayed for type.
[Corrective Action]
No action is required.
[Description]
A VM guest is no longer under the management of RCVE.
The server name of the VM guest is displayed for obj.
"VMguest" is displayed for type.
[Corrective Action]
No action is required.
[Description]
A VM guest has been migrated.
The server name of the VM guest is displayed for obj.
"VMguest" is displayed for type.
[Corrective Action]
No action is required.
[Description]
Execution of the script script_name has been started.
[Corrective Action]
No action is required.
[Description]
Execution of the script script_name has been completed successfully.
[Corrective Action]
No action is required.
