Install the software indicated in "2.2.2.3 Required software" on the Managed Server.
The following sections explain the settings where care is required with some of the required software.
Setting up the required software
Setting up ServerView Agent
Enter the settings for the SNMP service that are required to install a ServerView Agent.
Refer to the ServerView Agent manuals for details on how to set up the SNMP service.
For the SNMP community name, set the same value as the SNMP community name that has been set for the management blade.
Set Read (reference rights) or Write (reference and update rights) for the SNMP community name.
For the hosts for which SNMP packets will be accepted, either select Accept SNMP packets from any host or select Accept SNMP packets from these hosts, and then specify the IP address of the admin LAN for the Admin Server.
For the SNMP trap destination, specify the IP address of the Admin Server.
If the Admin Server that is the destination for SNMP traps has multiple NICs, specify the IP address of the admin LAN to which the Managed Server is connected.
