A.2.4 acarray detail (ETERNUS disk storage systems detail information display command)

NAME

acarray detail - Display the detail information on the ETERNUS disk storage systems

SYNOPSIS

acarray detail -a DISKARRAY-NAME [-xml]

DESCRIPTION

This command displays the detail information about the ETERNUS disk storage systems that have been registered.

OPTIONS

-a DISKARRAY-NAME: This option specifies the ETERNUS name.

-xml

This option specifies when displaying by the XML format.

This option can be specified in Windows, Solaris, Linux 5 (for x86, for Intel64).

EXIT STATUS

=0 : Completed successfully
>0 : Terminated abnormally

EXAMPLES

Displaying an ETERNUS disk storage system which is in a local site:

The execution example on Windows operating system is as follows.

> acarray detail -a E4000

Disk Array Name : E4000
BOX-ID          : 00E4000M3#####E450S20A####KD4030639004##
IP Address      : 10.124.6.251
Admin User      : root
Access Path     : X:

The following table shows the meanings of the information displayed.

Title	Explanation
Disk Array Name	Displays the ETERNUS name.
BOX-ID	Displays the box ID for the ETERNUS disk storage system.
IP Address	Displays the IP address for the ETERNUS disk storage system. (NOTE)
Admin User	Displays the user name for ETERNUS Disk storage system. (NOTE) When using ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2: The user name with Software role for target storage device When using other ETERNUS disk storage systems: The user name with Administrator authorization for target storage device
Access Path	Displays the access path set up for the ETERNUS disk storage system. (NOTE) [For Windows] Displays the device name of the physical drive. If the access path is automatically set by "A.2.1 acarray add (ETERNUS disk storage systems registration command)" or "A.2.5 acarray pathscan (Access path automatic setting command) [Excluding Linux 5 for Intel Itanium]", the form of "PhysicalDrive [disk number]" is used for display. The disk number is the same value as the "disk?" in the AdvancedCopy Manager block device name and the "Disk #" displayed in the [Disk Management] - [Computer Management] - [Management Tool] from the [Start] menu. [For Solaris] Displays the RAW device name. [For Linux] Displays the device name.

NOTE: If the specified ETERNUS disk storage system exists on a remote site, a hyphen (-) is displayed.