One of the following hardware devices is required to perform backup management or replication management. In addition, an advanced copy license and a suitable cache table size need to be set up. The settings required for the provided advanced copy functions differ for each hardware device, so check the required settings with your Fujitsu systems engineer (SE).
ETERNUS DX60/DX80/DX80 S2/DX90/DX90 S2
ETERNUS DX410/DX410 S2/DX440/DX440 S2
ETERNUS DX8100/DX8400/DX8700
ETERNUS2000 (model 100 or higher)
ETERNUS4000 (model 100 or higher)
ETERNUS8000
ETERNUS3000 (model 100 or higher)
ETERNUS6000
ETERNUS GR720/GR730/GR740/GR820/GR840
ETERNUS VS900 Virtualization switch
Point
When executing the Advanced Copy function of ETERNUS DX60/DX80/DX80 S2/DX90/DX90 S2, it is necessary to register the Advanced Copy license to the License Manager.
For the registration procedure of the Advanced Copy license, refer to "About ETERNUS SF License Manager" in the "ETERNUS SF AdvancedCopy Manager Installation and Setup Guide".
Note
To back up or restore Exchange Server 2007/Exchange Server 2010 on Windows Server 2008:
One of the following ETERNUS disk storage systems that support ETERNUS VSS Hardware Provider 1.5.x (VSSHP) is required. In addition to, the Advanced Copy license and the cache table size setting are required to use the Advanced Copy function.
ETERNUS DX60/DX80/DX80 S2/DX90/DX90 S2
ETERNUS DX410/DX410 S2/DX440/DX440 S2
ETERNUS DX8100/DX8400/DX8700
ETERNUS2000 (model 100 or higher)
ETERNUS4000 (model 300 or higher)
ETERNUS8000
To use ETERNUS VS900 Virtualization switch:
Refer to "12.1.8 Notes on using ETERNUS VS900 (virtualization switch)".
