2.1.1 Hardware requirements

Machine model

A machine that enables the Windows operating system to be loaded is required.

Note

The PRIMERGY FT model is not supported.

I/O device

The following I/O devices are required to run this software.

Note that an AdvancedCopy Manager license and appropriate cache table size settings are required.

The settings required for Advanced Copy functions will depend on the device type, so consult your Fujitsu systems engineer.

Table 2.1 Hardware requirements
Component name	Remarks
ETERNUS DX60/DX80/DX80 S2/DX90/DX90 S2 ETERNUS DX410/DX410 S2/DX440/DX440 S2 ETERNUS DX8100/DX8400/DX8700 ETERNUS2000 models 100 or higher ETERNUS4000 models 100 or higher ETERNUS8000 ETERNUS3000 models 100 or higher ETERNUS6000 ETERNUS GR720/GR730/GR740/GR820/GR840	Any one is required (also required if backup and replication operations are performed at the Storage Management Server). Advanced copy function is required.
LAN Card

Point

When executing the Advanced Copy function of ETERNUS DX60/DX80/DX80 S2/DX90/DX90 S2, it is necessary to register the Advanced Copy license to the License Manager.
For the registration procedure of the Advanced Copy license, refer to "Appendix E About ETERNUS SF License Manager".