For information on secondary node setup, refer to "A setup of the TSM server in the cluster node 2" and "If the TSM server is in an active/standby configuration" of the "ETERNUS SF TSM PRIMECLUSTER Application Guide".
For the secondary node also, a special file name must be set for drives on the tape device used by the TSM server. For details, refer to the "ETERNUS SF TSM PRIMECLUSTER Application Guide", section "If the TSM server is in an active/standby configuration" > "TSM server settings on cluster node 1".
Execute the command below to check the special file name to be set.
For LT20/LT40/LT60 (non-IBM drives)
#ls -l /dev/rmt/*[0-9] lrwxrwxrwx 1 root root 50 Feb 27 15:07 /dev/rmt/1 -> ../../devices/pci@17,4000/fibre-channel@4/mt@1,0: ... # |
For LT220/LT230/LT250/LT270 (IBM drives)
#ls -l /dev/rmt/*st lrwxrwxrwx 1 root sys 57 Apr 22 13:28 /dev/rmt/2st -> ../../devices/pci@15,2000/fibre-channel@1/IBMtape@1,0:st # |
