ServerView Resource Coordinator VE Setup Guide

2.2.1 List of Menus

The menus provided on the menu bar of the RC console are listed in the table below.
Options available vary according to the authority level of the user account.

Table 2.1 Menu Items

Menu bar	Menu	Submenu	Privileged user	General user	Function
File	Import	-	Yes	No	Imports the system configuration file for pre-configuration.
	Export	-	Yes	No	Exports the system configuration file for pre-configuration.
	Download Template	CSV format	Yes	Yes	Downloads a sample of the system configuration file (CSV format) for pre-configuration.
	Export Environmental Data	Chassis	Yes	Yes	Exports environmental data collected from chassis.
		Servers	Yes	Yes	Exports environmental data collected from servers.
		Power Monitoring Devices	Yes	Yes	Exports environmental data collected from power monitoring devices.
	Logout	-	Yes	Yes	Logs out of the RC console. (*1)
View	Reset Layout	-	Yes	Yes	Returns the layout of the RC console to its initial state.
Settings	Register	Chassis	Yes	No	Registers a chassis.
		Server	Yes	No	Registers a server.
		SPARC Enterprise (M3000)	Yes	No	Registers a SPARC Enterprise (M3000) server.
		SPARC Enterprise (Partition Model)	Yes	No	Registers SPARC Enterprise M4000/M5000/M8000/M9000 servers.
		PRIMERGY Partition Model	Yes	No	Registers a PRIMERGY Partition Model.
		LAN Switch	Yes	No	Registers a LAN switch.
		Agent	Yes	No	Registers an agent.
		Power Monitoring Device	Yes	No	Registers a power monitoring device.
		Management Software (vCenter Server)	Yes	No	Registers VM management software (VMware vCenter Server).
		Management Software (SCVMM)	Yes	No	Registers VM management software (System Center Virtual Machine Manager).
		Management Software (VIOM)	Yes	No	Registers VM management software (VIOM).
	Delete	-	Yes	No	Deletes a resource.
	Modify (*2)	Registration Settings	Yes	No	Modifies a resource's registration settings.
		HBA Address Rename Settings Area (*3)	Yes	No	Modifies the HBA address rename settings of a server.
		Network Settings (*4, *5)	Yes	No	Modifies the network settings of a LAN switch.
		Spare Server (*3)	Yes	No	Modifies a server's recovery settings.
		Monitoring Information	Yes	No	Modifies the monitoring information for a server.
		VM Host Login Account	Yes	No	Modifies the registered login account used to communicate with the VM host.
	User Accounts	-	Yes	Yes	Adds, changes, and deletes user accounts.
	Admin LAN Subnet	-	Yes	Yes (*6)	Performs viewing, registration, changing or deletion of the admin LAN subnet information.
Operation	Update	-	Yes	Yes	Updates a resource.
	Power	ON	Yes	No	Powers on a server.
		OFF	Yes	No	Powers off a server after shutting down its operating system.
		OFF (Forced)	Yes	No	Powers off a server without shutting down its operating system.
		Reboot	Yes	No	Reboots a server after shutting down its operating system.
		Reboot (Forced)	Yes	No	Reboots a server without shutting down its operating system.
	LED (*4)	ON	Yes	No	Turns the maintenance LED on.
		OFF	Yes	No	Turns the maintenance LED off.
	Spare Server (*2, *3)	Switchover	Yes	No	Switches over a server with one of its spare servers.
		Failback	Yes	No	Switches back a server to its pre-switchover state.
		Takeover	Yes	No	Accepts a switched over configuration as final (without switching back to the original configuration).
	Hardware Maintenance	Re-configure	Yes	No	Detects and re-configures the properties of a replaced server.
		Restore LAN Switch (*7)	Yes	No	Restores a LAN switch configuration.
	Maintenance Mode (*2)	Set	Yes	No	Places a server into maintenance mode.
		Release	Yes	No	Sets a server to active mode.
	Backup/Restore (*2)	Backup	Yes	No	Backs up a system image from a server.
		Restore	Yes	No	Restores a system image to a server.
	Cloning (*2, *8)	Collect	Yes	No	Collects a cloning image from a server.
		Deploy	Yes	No	Deploys a cloning image to a server.
	Migrate VM Guest	-	Yes	No	Migrates a VM guest to a different VM host.
	VM Home Position	Set	Yes	No	Sets VM Home Position.
		Migrate	Yes	No	Migrates a VM guest to VM Home Position
		Release	Yes	No	Clears VM Home Position.
Tools	Topology	Discover LAN switches	Yes	No	Discovers LAN switches within the admin LAN.
		Detect physical links	Yes	No	Acquires physical link data from registered LAN switches.
	Options	-	Yes	Yes (*9)	Modifies client and environmental data settings.
	Environmental Data Graph	-	Yes	Yes	Displays environmental data graphs.
Help	Manual	-	Yes	Yes	Displays product manuals.
	About	-	Yes	Yes	Displays product version information.

*1: If multiple RC console or BladeViewer sessions exist, the login sessions may be terminated.
*2: Cannot be selected for a VM guest.
*3: Cannot be selected for PRIMERGY Partition Models.
*4: Available only for PRIMERGY BX servers.
*5: Cannot be set for PRIMERGY BX900 LAN switch blades operating in IBP mode.
*6: Only the admin LAN subnet information can be displayed with general user privileges.
*7: Not available for PRIMERGY BX900 LAN switch blades operating in IBP mode.
*8: Cannot be selected for a VM host.
*9: General users cannot change environmental data settings.