A.1.2 Warning messages

This sub-section describes the AC Warning messages of the GFS Shared File System.

WARNING: sfcfs: 1001: argument address of mount(2) is invalid value. error occurred in copy_from_user() for mountpoint: error = error
WARNING: sfcfs: 1002: argument address of mount(2) is invalid value. error occurred in copy_from_user() for volumuinfo: error = error
WARNING: sfcfs: 1003: argument address of mount(2) is invalid value. error occurred in copy_from_user() for primaryMDS_saddr: error = error
WARNING: sfcfs: 1004: argument address of mount(2) is invalid value. error occurred in copy_from_user() for secondaryMDS_saddr: error = error

Explanation

The address from mount(2) is invalid.

Response

Collect a file output with fjsnap for troubleshooting information then contact your customer support engineers.

WARNING: sfcfs: 1005: mountpoint: volume id from MDS is invalid value: volid = volid

Explanation

Volume information is inconsistent.

Response

Unmount the relevant file system from all of the nodes, and check the file system configuration and the network, node, and IP address settings.

WARNING: sfcfs: 1006: mountpoint: volume id from MDS is invalid value. so volume is busy: volid = volid

Explanation

The specified volume has been used by another FS or mounted in a different mode.

Response

Unmount the relevant file system from all of the nodes, and check the file system configuration and the network, node, and IP address settings.

WARNING: sfcfs: 1007: mountpoint: failed to open volumes requested from MDS, no volume to open

Explanation

The partition that configures the file system cannot be opened.

Response

Check the state of the GDS volume.

WARNING: sfcfs: 1008: failed to read superblock information from disk associated device
WARNING: sfcfs: 1009: failed to read volume information from disk associated device

Explanation

Reading the volume failed.

Response

Check the volume status.

WARNING: sfcfs: 1010: failed to get volume information, when try to get extents: volid = volid

Explanation

An inconsistency occurred in the data volume information management.

Response

Collect a file output with fjsnap for troubleshooting information then contact your customer support engineers.

WARNING: sfcfs: 1011: failed to access to volume information, when try to get extents: volid = volid

Explanation

The data volume is not accessible.

Response

Check the volume status, and contact your local Customer Support if it is in the accessible condition.

WARNING: sfcfs: 1012: filesystem is in blockade

Explanation

The file system was blockaded.

Response

Collect a file output with fjsnap for troubleshooting information then contact your customer support engineers.

WARNING: sfcfs: 1013: mountpoint: invalid MOUNT response, so failed to recover: sfi_file = sfi_file: mt_file = mt_file
WARNING: sfcfs: 1014: mountpoint: invalid MOUNT response, so failed to recover: sfi_blksize = 8: mt_blksize = mt_blksize
WARNING: sfcfs: 1015: mountpoint: invalid MOUNT response, so failed to recover: sfi_volinfo_len = sfi_volinfo_len: mt_volinfo_len = mt_volinfo_len
WARNING: sfcfs: 1016: mountpoint: invalid MOUNT response, so failed to recover: sfi_vli_blocks = sfi_vli_blocks: mt_volinfo.mt_volinfo_val[num].vli_blocks=mt_volinfo.mt_volinfo_val[num].vli_blocks

Explanation

The call for MDS failure recovery of the file system (mountpoint) resulted in an error. The file system (mountpoint) becomes no longer available from the node.

Response

Unmount the relevant file system, and check the file system configuration and the network, node, and IP address settings.

WARNING: sfcfs: 1017: mountpoint: received header message is short: received size = received size: required size = required size
WARNING: sfcfs: 1018: mountpoint: received header message is bigger than Request-reply message came from MDS: received size = received size: Request-reply message = Request-reply message
WARNING: sfcfs: 1019: mountpoint: received body message is short: received size = received size: required size = required size

Explanation

An illegal message was received in communication with MDS of the file system (mountpoint). The file system becomes no operational.

Response

Unmount the relevant file system from the node on which the message was output, and check the network, node, and IP address settings.

WARNING: sfcfs: 1020: mountpoint: failed to send request to MDS: error = error: procedure_num = procedure_num

Explanation

An error occurred in communication with MDS of the file system (mountpoint).

Response

The operation can be continued when no other error message is output.

WARNING: sfcfs: 1021: mountpoint: failed to connect to PrimaryMDS: error = error

Explanation

Connecting to primary MDS failed. Mounting the file system (mountpoint) fails.

Response

Check the network, node, and IP address settings.

WARNING: sfcfs: 1022: mountpoint: failed to connect to SecondaryMDS: error = error

Explanation

Connecting to secondary MDS failed. Mounting the file system (mountpoint) fails.

Response

Check the network, node, and IP address settings.

WARNING: sfcfs: 1023: mountpoint: no response of heartbeat from Server MDS, so blockade

Explanation

The file system (mountpoint) is blockaded because heartbeat monitoring to the primary MDS is disconnected.

Response

Check the file system whether it is in continuous use. If it is no longer in continuous use, check and restore the network connection and the MDS, and then mount the file system again.

WARNING: sfcfs: 1024: mountpoint: cannot allocate memory space. so failed to create node for mountpoint

Explanation

Memory allocation failed.

Response

Increase the memory or the swap space.

WARNING: sfcfs: 1025: mountpoint: cannot allocate memory space. so failed to Spawn Xagent to receive Request from MDS

Explanation

Generating Xagent failed on mounting the file system (mountpoint).

Response

Increase the memory or the swap space.

WARNING: sfcfs: 1026: mountpoint: cannot allocate memory space. so failed to run Xagent

Explanation

Activation of the daemon to control multiple hosts to the file system (mountpoint) failed. The mounting fails.

Response

Check the memory and the swap space whether they are sufficient by looking up the console message and so on. If insufficient, increase the size, and then mount the file system again.

WARNING: sfcfs: 1027: mountpoint: cannot allocate memory space. so failed to run Clientds

Explanation

Activation of the daemon to control multiple hosts to the file system (mountpoint) failed. The mounting fails.

Response

Check the memory and the swap space whether they are sufficient by looking up the console message and so on. If insufficient, increase the size, and then mount the file system again.

WARNING: sfcfs: 1028: mountpoint: cannot allocate memory space for pagecache
WARNING: sfcfs: 1029: mountpoint: cannot allocate memory space for Node
WARNING: sfcfs: 1030: mountpoint: cannot allocate memory space. so failed to allocate Call
WARNING: sfcfs: 1031: cannot allocate memory space for xdr

Explanation

Memory allocation failed.

Response

Increase the memory or the swap space.

WARNING: sfcfs: 1032: mountpoint: mount for fsid=fsid was failed, because MDS was releasing the node information which was previously mounted.

Explanation

Mount processing of the file system (mountpoint) fails, because MDS was releasing the node information that was previously mounted.

Response

Mount the file system (mountpoint) again after some interval.