Top
ETERNUS SF AdvancedCopy Manager 14.1 Message Guide

10.1 Message Explanation

swstc0001

Illegal Arguments. [DETAIL]

Explanation

The format in which the command was specified is incorrect.

Parameters

DETAIL : Detailed error cause

System administrator response

Specify the command in the correct format and then re-execute the command.

For details on commands, refer to the following manual:
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstc0003

It failed in communication with AdvancedCopy Manager Tape server. Server name=[SERVER], Error=[ERRNO], Reason=[REASON].

Explanation

An attempt to communicate with the tape server has failed.

Parameters

SERVER : Tape server name
ERRNO : Error code
REASON : Detailed error code

System administrator response

Refer to "B.1 Error Codes for Communication Service/Communication daemon", and take remedial action as appropriate according to error code defined in the REASON parameter.

swstc0004

It failed in communication with AdvancedCopy Manager agent. Server name=[SERVER], Error=[ERRNO], Reason=[REASON].

Explanation

An attempt to communicate with the Storage server has failed.

Parameters

SERVER : Tape server name
ERRNO : Error code
REASON : Detailed error code

System administrator response

Refer to "B.1 Error Codes for Communication Service/Communication daemon", and take remedial action as appropriate according to error code defined in the REASON parameter.

swstc0005

It failed in the access of the registry of AdvancedCopy Manager. errno=[ERRNO]

Explanation

An attempt to acquire configuration management information has failed.

Parameters

ERRNO : Error code

System administrator response

Refer to "B.2 Error Codes for Configuration Management", and take remedial action as appropriate according to error code defined in the ERRNO parameter.

swstc0006

It failed in the get nodename from AdvancedCopy Manager. file=[FILE], code=[ERRNO]

Explanation

An attempt to acquire the execution server registry has failed.

Parameters

FILE : Registry file name
ERRNO : Error code

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0007

It failed in the lock device. [DETAIL]

Explanation

An attempt to lock the device has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Another AdvancedCopy Manager command may be using the specified device.If DETAIL parameter indicates an <swstxxxx> message, take appropriate action based on its message.

swstc0008

It failed in the lock AdvancedCopy Manager Commands. [DETAIL]

Explanation

An attempt to lock the command has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Another AdvancedCopy Manager command may be running. If DETAIL parameter indicates an <swstxxxx> message, take appropriate action based on the message.

swstc0010

It failed in the unlock AdvancedCopy Commands. [DETAIL]

Explanation

An attempt to unlock the command has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0011

It failed in the getting device name in the Loggroup. [DETAIL]

Explanation

An attempt to acquire device information in the log group has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0012

It failed in the getting backup volume information. [DETAIL]

Explanation

An attempt to acquire the backup volume information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0013

System call error: [DETAIL]

Explanation

A system call error occurred.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0014

It failed in AdvancedCopy Manager. [DETAIL]

Explanation

An error occurred within AdvancedCopy Manager.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0015

Cannot get information from tboserver file. [DETAIL]

Explanation

An attempt to acquire the tape server information file has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0016

This server is not matched with a tape server. [DETAIL]

Explanation

Correlation of this server with the tape server is not set.

Parameters

DETAIL : Detailed error cause

System administrator response

After executing the acmsvrset command, re-execute the command.

swstc0017

This server is not Storage Management Server. [DETAIL]

Explanation

Servers other than the Storage management server cannot use this command format.

Parameters

DETAIL : Detailed error cause

System administrator response

Check that the command syntax is complete with all the required parameters, and then re-execute.

swstc0018

The lock file does not exist. [DETAIL]

Explanation

The lock file does not exist.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0019

Checking the existence of lock process failed. [DETAIL]

Explanation

An attempt to check the existence of the lock process has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0020

Cannot delete the lock file. [DETAIL]

Explanation

An attempt to delete the lock file has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0021

The error occurred by the access to management information. [DETAIL]

Explanation

An error occurred as a result of accessing management information.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0022

Internal contradiction detected it in managed information. [DETAIL]

Explanation

An internal contradiction occurred in management information.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0023

Code conversion error occurred. [DETAIL]

Explanation

An attempt to convert the character code has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0024

Shortage of memory occurred. [DETAIL]

Explanation

Insufficient memory.

Parameters

DETAIL : Detailed error cause

System administrator response

Check if there is enough memory space according to "Installation of the Agent" in the "ETERNUS SF AdvancedCopy Manager Installation and Setup Guide". If there is not enough memory space, increase the memory capacity and then re-execute the processing.

If there is enough memory space, refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0025

Cannot make the lock file. [DETAIL]

Explanation

An attempt to create a lock file has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0026

The information about the specified value is not found. [DETAIL]

Explanation

Information related to the specified value does not exist.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0027

Internal command error. [DETAIL]

Explanation

An error occurred in the internal command.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0030

Content of file is illegal. [DETAIL]

Explanation

The contents of the file are invalid.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0031

The error Occurred at OPC copy. [DETAIL]

Explanation

The tape backup cannot be made because the OPC physical copy was unsuccessful.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0032

The specified server is not a tape server. [DETAIL]

Explanation

The specified server is not the tape server.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0033

There are not history in the disk and the tape. [DETAIL]

Explanation

The specified backup history does not exist.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0034

Please execute it by the root user.

Explanation

This processing must be executed by a root user.

System administrator response

Log in again as the root user and then re-execute the processing.

swstc0035

Backup history not found. [DETAIL]

Explanation

The backup history was not found.

Parameters

DETAIL : Detailed error cause

System administrator response

Check if the specified backup history exists. If the specified backup history does not exist, specify an existing backup history.

swstc0036

Storage server does not exist. [DETAIL]

Explanation

Storage server information does not exist.

Parameters

DETAIL : Detailed error cause

System administrator response

Check if the Storage server environment is set up.

swstc0037

Tape backup policy exists. [DETAIL]

Explanation

The tape backup policy exists.

Parameters

DETAIL : Detailed error cause

System administrator response

Delete the tape backup policy, and then re-execute the processing.

swstc0038

Restore for the specified Restore Device Name is not being executed. [DETAIL]

Explanation

Restoration was not performed for the specified restoration destination device (name).

Parameters

DETAIL : Detailed error cause

System administrator response

Check if the specified device exists and that if restoration is to be performed, the device specified is the correct device. If restoration is not to be performed, no response is required.

If restoration is to be performed, refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0039

An internal error occurred by the file. [DETAIL]

Explanation

An internal contradiction occurred in the registry file.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0040

Illegal Arguments. [DETAIL]

Explanation

An argument error occurred during internal processing.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0041

The command failed on the tape server. [DETAIL]

Explanation

An error occurred on the tape server.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0042

TapeBackup policy exists. [DETAIL]

Explanation

The tape backup policy exists.

Parameters

DETAIL : Detailed error cause

System administrator response

After deleting the tape backup policy, re-execute the processing.

swstc0050

Transmission of a file failed. [DETAIL]

Explanation

An attempt to transmit the file has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstc0051

Restore device is incorrect. [DETAIL]

Explanation

The specified restoration destination device is incorrect.

Parameters

DETAIL : Detailed error cause. Any the following displayed may have occurred:

  • Device information is changed.

  • It is a Backup volume in use.

  • Mount-point is changed.

  • Device is already mounted.

  • This command cannot be run because the logical volume spans multiple physical volumes. Logical Volume Name=[VOLUME]"

  • udev name read failed.(errno)

System administrator response

Take appropriate action based on the message indicated in DETAIL parameter.

Table 10.1 Messages indicated in DETAIL parameter and appropriate action

Message indicated in DETAIL parameter

Appropriate action

Device information is changed.

The contents of the AdvancedCopy Manager device information file are inconsistent with the system device configuration.
Obtain information of all devices with AdvancedCopy Manager and re-execute.

It is a Backup volume in use.

Re-execute the restoration operation by specifying other device as the restoration destination, or delete the backup histories of the specified backup volume.

Mount-point is changed.

Obtain information of all devices with AdvancedCopy Manager and re-execute.

Mounted.

Unmount the restoration device and re-execute processing.

This command cannot be run because the logical volume spans multiple physical volumes. Logical Volume Name=[VOLUME]

Configuration information of a logical volume was changed after the volume was registered with the backup management function. Refer to the following manual, change device information accordingly, and re-execute the command:
"Changing Device Configuration" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide"

udev name read failed.(errno)

Cannot access the "udev name" udev device.
Check that the udev device has been created, or that the udev device can be accessed.

swstm0001

tbod start failed, invalid option specified.

Explanation

An attempt to start the tape server daemon has failed because an invalid option was specified.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

In addition, collect the /etc/init.d/FJSVswstm file on the tape server.

swstm0002

tbod start failed, cannot fork (errno = [ERRNO]).

Explanation

An attempt to start the tape server daemon has failed because the fork system call resulted in an error.

Parameters

ERRNO : Error number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0003

tbod start failed, cannot create [FILE] (errno = [ERRNO]).

Explanation

An attempt to start the tape server daemon has failed because the creat system call resulted in an error.

Parameters

FILE : File name
ERRNO : Error number of the creat system call

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0004

tbod start failed, already started.

Explanation

The tape server daemon is already started.

System administrator response

No response is required.

swstm0005

tbod start failed, cannot lock [FILE] (errno = [ERRNO]).

Explanation

An attempt to start the tape server daemon has failed because the file could not be locked.

Parameters

FILE : File name
ERRNO : Error number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0006

tbod start failed, check configuration file failed, cannot popen [COMMAND] (errno = [ERRNO]).

Explanation

An attempt to start the tape server daemon has failed because the configuration file could not be checked.

Parameters

COMMAND : Check command name
ERRNO : Error number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0007

tbod start failed, tbocheckconf error. [DETAIL]

Explanation

An attempt to start the tape server daemon has failed because the description of the configuration file is incorrect.

Parameters

DETAIL : Detailed error cause

System administrator response

Ensure that the configuration file has been described correctly, and then restart the tape server daemon.

For information about how to describe the configuration file, refer to "Initial configuration of a Tape Server" in the "ETERNUS SF AdvancedCopy Manager Installation and Setup Guide".

swstm0008

tbod start failed, [FILE] is invalid format or size.

Explanation

An attempt to start the tape server daemon has failed because the management information file of the tape server is invalid.

Parameters

FILE : Management information file name

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0009

tbod start failed, [FILE] is not ordinary file.

Explanation

An attempt to start the tape server daemon has failed because the management information file of the tape server is invalid.

Parameters

FILE : Management information file name

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0010

tbod start failed, Version information doesn't correspond. The version of [FILE] is [VERS1] although the version of tbod is [VERS2].

Explanation

An attempt to start the tape server daemon has failed because the version of tape server management information is incompatible with the installed version of the AdvancedCopy Manager.

Parameters

FILE : Management information file name
VERS1 : Version of tape server management information
VERS2 : Version of AdvancedCopy Manager

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0012

Request end abnormally, signal [SIGNO] caught.

Explanation

This request will end abnormally because an invalid signal was received.

Parameters

SIGNO : Signal number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0013

Signal[SIGNO] is caught, tbod will be down.

Explanation

The tape server daemon will stop because it received an invalid signal.

Parameters

SIGNO : Signal number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0014

tbod start failed, the initialization of the Backup Management file[FILE] error occurred. Cannot [SYSCALL] (errno = [ERRNO]).

Explanation

An attempt to start the tape server daemon has failed because the management information file could not be initialized.

Parameters

FILE : Management information file name
SYSCALL : System call name
ERRNO : Error number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0015

tbod start failed, the initialization processing error occurred. Cannot [SYSCALL] (errno = [ERRNO]).

Explanation

An attempt to start the tape server daemon has failed because an error occurred during initialization processing.

Parameters

SYSCALL : System call name
ERRNO : Error number

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0020

When the [OPT1] option is specified, it is necessary to be specified the [OPT2] option.

Explanation

Specify the option indicated in OPT1 parameter with the option indicated in OPT2 parameter.

Parameters

OPT1 : Specified option
OPT2 : Option you must specify with OPT1 parameter

System administrator response

Specify the option indicated in OPT2 parameter, and then re-execute the command.

swstm0021

When the [OPT1] option is specified, it cannot be specified the [OPT2] option.

Explanation

You cannot specify the option indicated in OPT1 parameter and the option indicated in OPT2 parameter at the same time.

Parameters

OPT1 : Specified option
OPT2 : Option you cannot specify with OPT1 parameter

System administrator response

Specify the correct option in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0022

This command is executable by only the root user.

Explanation

Only a root user can execute this command.

System administrator response

Log in again as a root user, and then re-execute the command.

swstm0023

An incorrect option was specified.

Explanation

An incorrect option was specified.

System administrator response

Specify the correct option in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0024

Too many [OPT] option were specified.

Explanation

Too many options were specified.

Parameters

OPT : Duplicated option

System administrator response

Specify the correct options in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0025

Necessary option was not specified.

Explanation

A required option is not specified.

System administrator response

Specify the correct option in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0026

The argument of the [OPT] option was invalid.

Explanation

The value specified in the option argument is invalid.

Parameters

OPT : Invalid option argument

System administrator response

Specify the correct option argument in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0027

Too many operands were specified.

Explanation

Too many arguments are specified.

System administrator response

Specify the correct format in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0028

Necessary operand was not specified.

Explanation

Not enough arguments are specified in the command.

System administrator response

Specify the correct format in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0029

The operand was invalid. operand=[OPERAND]

Explanation

An invalid value was specified in the argument.

Parameters

OPERAND : Invalid argument

System administrator response

Specify the correct option argument in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0030

Failed to allocate memory.

Explanation

An attempt to allocate memory has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0031

Storage server does not exist.

Explanation

The specified Storage server is not registered.

System administrator response

Register the Storage server or specify the correct Storage server name.

swstm0032

Device does not exist.

Explanation

The specified transaction volume is not registered.

System administrator response

Register the transaction volume or specify the correct transaction volume name.

swstm0033

Loggroup does not exist.

Explanation

The specified log group is not registered.

System administrator response

Register the transaction volume that belongs to the log group or specify the correct log group name.

swstm0034

It failed in the access of the registry of AdvancedCopy Manager [DETAIL].

Explanation

An attempt to acquire configuration management information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0035

It failed in the change code transfer.

Explanation

An attempt to convert the character code has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0036

Internal error occurred. [DETAIL]

Explanation

An internal error occurred.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0037

Cannot get the Backup Management file [KIND] of tape server.

Explanation

An attempt to acquire tape server management information has failed.

Parameters

KIND : Management information type

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0038

Cannot lock the Backup Management file [KIND] of tape server.

Explanation

An attempt to lock tape server management information has failed.

Parameters

KIND : Management information type

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0039

Cannot update the Backup Management file [KIND] of tape server.

Explanation

An attempt to update tape server management information has failed.

Parameters

KIND : Management information type

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0040

Cannot be specified the device which belongs to a Loggroup.

Explanation

You cannot individually specify devices in the log group.

System administrator response

Specify the log group, and then re-execute the processing.

swstm0041

This device is used, or the exclusion of the device failed.

Explanation

The device is being used or an attempt to exclude the device has failed.

System administrator response

Check if a process is being performed by using the acmexecstat command (Execution status display command).

  • If there is a process being performed

    Wait until the process is completed, and then re-execute the processing.

  • If there is no process being performed and the same error occurs again

    Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
    "Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0042

The exclusion release of the device failed.

Explanation

An attempt to release device exclusion has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0043

The device is busy.

Explanation

The device is being used.

System administrator response

Check if a process is being performed by using the acmexecstat command (Execution status display command).

  • If there is a process being performed

    Wait until the process is completed, and then re-execute the processing.

  • If there is no process being performed and the same error occurs again

    Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
    "Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0044

Cannot connect with tape server daemon.

Explanation

An attempt to communicate with the tape server daemon has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0045

TSM error occurred. [DETAIL].

Explanation

An error occurred in TSM.

Parameters

DETAIL : Detailed error cause

System administrator response

Messages beginning with "DCF" or "ANS" in the DETAIL parameter are TSM error messages.

For an explanation and System administrator response for their messages, refer to the following manuals.

  • Message beginning with "DCF"

    "Specific Device Access Command User's Guide" which is a TSM manual

  • Messages beginning with "ANS"

    "Messages" which is a TSM manual

swstm0046

fork() failed.

Explanation

An attempt to generate a process has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0047

This request is terminated, because the tape server daemon was stopped.

Explanation

This request is terminated because the tape server daemon was stopped.

System administrator response

If you need to retry this request, restart the tape server daemon and then re-execute the processing.

swstm0048

This request is terminated, because the cancel command is executed.

Explanation

This request is terminated because the cancel command was run.

System administrator response

No response is required.

swstm0050

Cannot set the signal handler.

Explanation

An attempt to set the signal handler has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0051

The device was not transaction volume.

Explanation

The target device is not a transaction volume.

System administrator response

Reregister the target device as a transaction volume or specify an existing transaction volume.

swstm0052

It failed in reading the [FILE] file. [DETAIL]

Explanation

An attempt to read the configuration file has failed.

Parameters

FILE : Configuration file name
DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0053

The [FILE] file does not exist.

Explanation

The configuration file does not exist.

Parameters

FILE : Configuration file name

System administrator response

Create a configuration file.

For information about how to describe the configuration file, refer to "Initial Configuration of a Tape Server" in the "ETERNUS SF AdvancedCopy Manager Installation and Setup Guide".

When this message was output by using the tbodrrestore command (Command for restoring from tape for disaster recovery), refer to "Procedures for difining the restoration destination devices" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide Tape Backup Option" and check whether the configuration information files of the restoration destination devices is created correctly.

swstm0054

Invalid data is specified in the [FILE] file.

Explanation

Description of the configuration file is incorrect.

Parameters

FILE : Configuration file name

System administrator response

Correct the configuration file.

For information about how to describe the configuration file, refer to "Initial Configuration of a Tape Server" in the "ETERNUS SF AdvancedCopy Manager Installation and Setup Guide".

swstm0055

cannot create [FILE] file. [DETAIL]

Explanation

An attempt to create an internal file has failed.

Parameters

FILE : Internal file name
DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0056

Some processing related to the tape backup is being executed.

Explanation

Processing related to the tape backup is being performed.

System administrator response

Wait until all processing related to the tape backup is completed, and then re-execute the processing.

swstm0057

Tape server daemon is running.

Explanation

The tape server daemon is running.

System administrator response

Stop the tape server daemon, and then re-execute the processing.

For information about how to stop the tape server daemon, refer to "Starting and Stopping Daemons" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0058

The directory [DIR] does not exist.

Explanation

The specified directory does not exist.

Parameters

DIR : Directory name

System administrator response

Specify an existing directory, and then re-execute the processing.

swstm0059

TSM administrative information Backup failed. [DETAIL]

Explanation

An attempt to back up TSM administrative information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0060

TSM DB Backup failed. [DETAIL]

Explanation

An attempt to back up the TSM database has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0061

ACM administrative information Backup failed. [DETAIL]

Explanation

An attempt to back up administrative information about the AdvancedCopy Manager tape manager has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0062

TSM administrative information restore failed. [DETAIL]

Explanation

An attempt to restore TSM administrative information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0063

TSM DB restore failed. [DETAIL]

Explanation

An attempt to restore the TSM database has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0064

ACM administrative information restore failed. [DETAIL]

Explanation

An attempt to restore administrative information about the AdvancedCopy Manager tape manager has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0065

Tape server package is not installed.

Explanation

The tape server package is not installed.

System administrator response

Install the tape server package by referring to the "ETERNUS SF AdvancedCopy Manager Installation and Setup Guide".

swstm0066

Necessary option was not specified by the first setting. option=[OPT]

Explanation

The required option was not specified in the command when the command was run the first time.

Parameters

OPT : Required option

System administrator response

Specify the correct option in the command, and then re-execute the command.

For details on commands, refer to the following manual.
"Various Commands" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0100

Storage Pool does not exist. poolname = [POOL]

Explanation

The specified storage pool does not exist.

Parameters

POOL : Storage pool name

System administrator response

Create a storage pool or specify an existing storage pool, and then re-execute the processing.

swstm0101

Backup management class is not set.

Explanation

The specified tape backup management class is not set.

System administrator response

Set the specified tape backup management class or specify the set backup management class, and then re-execute the processing.

swstm0102

Tape backup policy is not set.

Explanation

The tape backup policy is not set.

System administrator response

Set the tape backup policy, and then re-executen the processing.

swstm0103

Pretreatment failed. [DETAIL]

Explanation

Preprocessing failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to "B.5 Error Codes of Pre-processing Script and Post-processing Script", and take remedial action as appropriate according to error code defined in the DETAIL parameter.

swstm0104

Posttreatment failed. [DETAIL]

Explanation

Postprocessing failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to "B.5 Error Codes of Pre-processing Script and Post-processing Script", and take remedial action as appropriate according to error code defined in the DETAIL parameter.

swstm0105

Writing to the tape media failed. [DETAIL]

Explanation

An attempt to write data to the tape has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Messages beginning with "DCF" or "ANS" in the DETAIL parameter are TSM error messages.

For an explanation and System administrator response for their messages, refer to the following manuals.

  • Message beginning with "DCF"

    "Specific Device Access Command User's Guide" which is a TSM manual

  • Messages beginning with "ANS"

    "Messages" which is a TSM manual

This message is also displayed when information needed for backing up the disks of ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, ETERNUS4000 to a tape in a multipath environment has not been collected. For details on how to acquire this information, refer to "tbogetoluinfo (ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, ETERNUS4000 information acquisition command)" in "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0106

The device configuration has changed since last registered information.

Explanation

Transaction volume cabinet information (cabinet identifier, OLU, EXTENT starting position, or EXTENT size) has changed.

System administrator response

Delete the transaction volume and then retrieve the device information again.

For details, refer to "Changing the Device Configuration" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0107

It failed in transfer of recovery control file. [DETAIL]

Explanation

An attempt to transfer the recovery control file has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0108

The recovery control file is not found.file=[FILE]

Explanation

The recovery control file does not exist.

Parameters

FILE : Recovery control file name

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0110

The specified backup history does not exist.

Explanation

The specified backup history does not exist.

System administrator response

Check if the backup history is correctly specified.

swstm0111

Reading to the tape media failed. [DETAIL]

Explanation

An attempt to read data from the tape has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Messages beginning with "DCF" or "ANS" in the DETAIL parameter are TSM error messages.

For an explanation and System administrator response for their messages, refer to the following manuals.

  • Message beginning with "DCF"

    "Specific Device Access Command User's Guide" which is a TSM manual

  • Messages beginning with "ANS"

    "Messages" which is a TSM manual

swstm0112

The specified transfer device does not exist.

Explanation

The specified restoration destination device is not registered.

System administrator response

Register the specified restoration destination device or specify a registered device, and then re-execute the processing.

swstm0113

The specified transfer device cannot be specified.

Explanation

The specified restoration destination device cannot be specified as the restoration destination.

System administrator response

Specify a volume that can be specified as the restoration destination.

For information about the volumes that can be specified as the restoration destination, refer to "acmrestore (Restore command)" or "tborestore (Tape restore command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0114

The physical IPaddress file does not exist.

Explanation

The specified physical IP address file does not exist.

System administrator response

Specify the correct physical IP address file name, and then re-execute the processing.

swstm0115

It failed in reading the physical IPaddress file. [DETAIL]

Explanation

An attempt to read the physical IP address file has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0116

Tape Backup Policy cannot be deleted. The device has the backup history.

Explanation

The tape backup policy cannot be deleted because the backup history exists.

System administrator response

Delete all the backup histories from the target transaction volume tape, and then re-execute the processing.

swstm0117

Tape Backup Policy cannot be deleted. The device has the running process.

Explanation

The tape backup policy cannot be deleted because there is a process being performed.

System administrator response

Wait till all the processes of the target transaction volume are completed, and then re-execute the processing.

swstm0121

TapeCopy request accept fail. [DETAIL]

Explanation

An attempt to receive the tape copy request has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0122

Resource data for loggroup does not match.

Explanation

Resource information in the log group is inconsistent. You cannot recover backup history where the reference dump and normal dump coexist.

System administrator response

Specify a backup history where the reference dump and normal dump do not coexist, and then recover the history.

swstm0123

Source not correspond to destination about device size.

Explanation

The size of the device specified as the restoration destination is less than the size of the backup data to be restored.

System administrator response

Specify a device whose size is greater than or equal to the backup data size as the restoration destination.

swstm0124

Failed in recovery of SymfoWARE/RDB, mismatched recovery mode.

Explanation

An attempt to recover Symfoware/RDB has failed because the recovery end point specified in the recovery is incorrect.

System administrator response

Specify the correct recovery end point, and then re-execute the recovery.

swstm0125

Cannot change to another Device Type. This is because TapeBackup Policy exists in this Transaction Volume. Device Name=[DEVICE]

Explanation

The device cannot be changed to another device type because the tape backup policy exists for the transaction volume.

Parameters

DEVICE : Device name

System administrator response

Delete the tape backup policy for the transaction volume, and then re-execute the processing.

swstm0126

Cannot change Server. This is because Backup Management Class or Tape Backup Policy exists in this Tape Server.

Explanation

The tape server cannot be changed because the backup management classes or backup policies exist in the tape server.

System administrator response

Delete all the backup management classes and backup policies of the Storage server managed by the tape server, and then reattempt the change to the tape server.

swstm0127

The storage server name has changed since last registered information.

Explanation

The Storage server name is changed.

System administrator response

Refer to "Changing the Storage Server Name" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0128

Failed in delete recovery control file. [DETAIL]

Explanation

An attempt to delete the recovery control file on the tape server has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0129

Cannot get the Backup volume information. [DETAIL]

Explanation

An attempt to acquire the backup volume information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0130

Failed in request not accepted. [DETAIL]

Explanation

An attempt to accept the request has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0131

Failed in terminated execution process.

Explanation

An attempt to terminate the execution process has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0132

It failed in the access of the GRAPI. [DETAIL.]

Explanation

An attempt to acquire volume information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0133

Invalid data is specified in the file "tsmbkfile". [FILE]

Explanation

The file specified in the tsmbkfile file does not exist.

Parameters

FILE : File name

System administrator response

Change the file name specified in the "tsmbkfile" file to an existing file name, and then re-execute the processing.

swstm0134

The RAID device is busy.

Explanation

The specified ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000 is now busy.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0135

Timeout occurred.

Explanation

A timeout occurred during communication with the specified ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0136

Connection to [IPADDR] failed.

Explanation

An attempt to connect to the IP address of the specified ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000 has failed.

Parameters

IPADDR : IP address

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0137

Data transfer failed.

Explanation

An attempt to transfer data to the specified ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000 has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0138

[IPADDR] is not the managed RAID device.

Explanation

The IP address of the specified ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000 is not managed by the tape server.

Parameters

IPADDR : IP address

System administrator response

Refer to "Adding ETERNUS disk storage systems" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0139

Failed in read the logical device path.

Explanation

An attempt to acquire the access path has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0140

The RAID device can not be recognized.

Explanation

This RAID device is not supported.

System administrator response

Specify a RAID device supported by AdvancedCopy Manager.

swstm0141

Getting information from the RAID device failed. [DETAIL]

Explanation

An attempt to acquire RAID device information has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0142

[IPADDR] is not target.

Explanation

The specified IP address is not an IP address of ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000.

Parameters

IPADDR : IP address

System administrator response

This command can not be run for any RAID devices other than ETERNUS DX60/DX80/DX90, ETERNUS DX400 series, ETERNUS2000, ETERNUS3000, or ETERNUS4000.

swstm0143

Backup Management Class cannot be deleted. There is Tape Backup Policy using a Backup Management Class to delete.

Explanation

This tape backup management class cannot be deleted because there are still backup policies set for this class.

System administrator response

Delete all the backup policies where this tape backup management class is set, and then re-execute the processing.

swstm0144

Update of [FILE] failed.

Explanation

An attempt to update a file has failed.

Parameters

FILE : Name of file for which the update failed

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0145

[DSTFILE] cannot recover. original: [SRCFILE])

Explanation

An attempt to recover a file has failed.

Parameters

DSTFILE : Recovery destination filename
SRCFILE : Recovery source filename

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0146

Failed in processing on a Storage Server.[DETAIL]

Explanation

An attempt to perform processing on the Storage server has failed.

Parameters

DETAIL : Detailed error cause

System administrator response

Take appropriate remedial action corresponding to the error code indicated in DETAIL parameter.

swstm0147

Cannot copy a disk backup history to tape. This is because backup history already exists in this Tape Server. Device Name=[DEVICE], Version Number=[NUMBER]

Explanation

This disk backup history cannot be copied to the tape because it already exists on the tape server.

Parameters

DEVICE : Device name
NUMBER : Absolute generation number

System administrator response

The backup history specified as the copy target already exists on the tape server. Execute the acmhistdisp command (History information display command) to check the absolute generation number.

For details of the acmhistdisp command, refer to the following manual.
"acmhistdisp (History information display command)" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option".

swstm0148

The number of tape backup history exceeds the Tape Backup Policy management class of limit generation number. DeviceName=[DEVICE]

Explanation

The backup history exceeds the number of generations saved for the management class set in the backup policy.

Parameters

DEVICE : Device name

System administrator response

Delete unnecessary history, and then re-execute the processing.

swstm0157

The corresponding processing is not started or is already ended.

Explanation

The process attempted to be cancelled has not been started or has already ended.

System administrator response

If an incorrect option or operand was specified for the processing targeted for cancellation, set the correct option or operand, and then re-execute the processing.

If the specified options and operands were correct, no response is required.

swstm0166

An incorrect device was specified. Device Name = [DEVICE]

Explanation

The device cannot be specified.

Parameters

DEVICE : Device name

System administrator response

For the acmbackup command and the acmrestore command, an LU (disk) in the device cannot be specified.

For the tbobackup command, a disk in the device cannot be specified.

Refer to "System Volume Backup" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option" for information concerning backup and restore of LU (disk) unit system volumes.

swstm0167

failed in [PROCESS] processing.

Explanation

Processing of a tbodrrestore command failed.

Parameters

PROCESS : "dsmcfafs" or "dsmcfraw"

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0168

The processing is interrupted, because the signal was received. signo = [SIGNO]

Explanation

A signal interrupted processing.

Parameters

SIGNO : Signal number

System administrator response

If required, re-execute the command.

swstm0169

"-R option" is a required item in the case of SymfoWARE.

Explanation

A recovery control file directory must be specified for SymfoWARE volumes.

System administrator response

In the -R option, specify the restore destination directory name for the recovery control file, and then re-execute the command.

swstm0170

Cannot access directory of [DIR].

Explanation

The specified directory cannot be accessed.

Parameters

DIR : Directory name

System administrator response

Specify the correct directory name, and then re-execute the command.

swstm0171

[DIR] is not a directory.

Explanation

The specified path name is not a directory.

Parameters

DIR : Directory name

System administrator response

Specify the correct directory name, and then re-execute the command.

swstm0172

Cannot open directory of [DIR].

Explanation

The specified directory cannot be opened.

Parameters

DIR : Directory name

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm0173

Backup history does not exist.

Explanation

There is no backup history information.

System administrator response

There is no backup history in the ACM management information in the specified directory. Specify ACM management information that contains backup history.

swstm0174

Backup management file does not exist.

Explanation

The directory that contains the specified ACM management registry information does not contain backup history information.

System administrator response

The directory that contains the ACM management registry information may be incorrect. Check the directory that contains the ACM management registry information, and then re-execute the command.

swstm0175

Defined Access Path is out of specifications.

Explanation

The configuration of the LUN set in the access path contains an error.

System administrator response

The devpath.conf file coding or the LUN design contains an error. Check the LUN design, and then set the devpath.conf definition correctly.

swstm0176

mplb_ext_active already exists.

Explanation

The mplb_ext_active file already exists.

System administrator response

When a GR multi-path driver is used for operations, no response is required.

When the operations that do not use a GR multi-path driver, delete the /etc/opt/FJSVswstm/conf/mplb_ext_active file.

swstm0177

The configuration file of CM information already exists.

Explanation

The tbogetoluinfo command was executed using an ETERNUS multi-path driver.

System administrator response

This command is for the purpose of setting an upgrade. Therefore, no response is required.

swstm0178

In the case of "SymfoWARE", the "-R option" is an unnecessary item.

Explanation

A recovery control file directory cannot be specified for an ordinary volume.

System administrator response

To restore an ordinary volume, re-execute the command without specifying the -R option.

To restore a SymfoWARE volume, specify the restore destination directory name for the recovery control file in the -R option, then specify a SymfoWARE volume and re-execute the command.

swstm0179

Library device does not have tape. tape Name=[TAPE,...]

Explanation

The specified tape volume is not in the library device.

Parameters

TAPE : Tape volume name

System administrator response

The indicated tape volume is not in the library device, or the TSM server may not have been started.

  • If it is possible that the TSM server has not been started

    Use the "dsmc query session" command to check the TSM server status.

    For details on the "dsmc query session" command , refer to the "Tivoli Storage Manager for Windows Backup/Archive Client Installation and User's Guide" or "Tivoli Storage Manager for UNIX and Linux Backup/Archive Client Install and User's Guide".

  • If the TSM server is operating normally

    Insert the indicated tape volume in the library device, and then re-execute the command.

swstm0180

Invalid device. because comparison error of BoxID.

Explanation

The BoxID of the device specified in the -r option as the restore destination does not match the access path specified in the Access-Path operand.

System administrator response

Specify the correct restore destination device or access path, and then re-execute the command.

swstm0181

A file name is too long. File OPEN is impossible.

Explanation

The restore destination server name in the -d option, and the storage destination directory name of the configuration information file of the recovery destination device, specified in the Data-Record-Dir operand, are too long.

System administrator response

Shorten the restore destination server name in the -d option, or the storage destination directory name of the configuration information file of the recovery destination device, specified in the Data-Record-Dir operand, and then re-execute the command.

swstm1000

Making the error message failed.

Explanation

An attempt to create an error message has failed.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option"

swstm2000

Setup of the Tape Server cluster for the primary node is complete. Next, create the cluster environment of the secondary node.

Explanation

Setup of the Tape Server cluster for the primary node is complete.

System action

The system completes processing.

System administrator response

Perform the next step in the procedure for creating the Tape Server cluster environment.

swstm2001

Setup of the Tape Server cluster for the secondary node is complete.

Explanation

Setup of the Tape Server cluster for the secondary node is complete.

System action

The system completes processing.

System administrator response

Perform the next step in the procedure for creating the Tape Server cluster environment.

swstm2002

The Tape Server cluster of the primary node has been deleted.

Explanation

The Tape Server cluster of the primary node has been deleted successfully.

System action

The system completes processing.

System administrator response

Perform the next step in the procedure for deleting the Tape Server cluster environment.

swstm2003

The Tape Server cluster of the secondary node has been deleted. Next, delete the cluster environment of the primary node.

Explanation

The Tape Server cluster of the secondary node has been deleted successfully.

System action

The system completes processing.

System administrator response

Perform the next step in the procedure for deleting the Tape Server cluster environment.

swstm2004

The processing was canceled.

Explanation

Processing was canceled.

System action

The system terminates processing.

System administrator response

No response is required.

swstm2005

No cluster environment with the node name [NAME] has been created.

Explanation

The cluster setup for the Storage Management Server transaction or Storage Server transaction is not complete on the specified logical node name.

Parameters

NAME : Specified logical node name

System action

The system terminates processing.

System administrator response

Check whether cluster setup for the Storage Management Server transaction or Storage Server transaction has completed on the specified logical node name.

For cluster setup of the Storage Management Server Transactions and the Storage Server Transactions, refer to "Preparations for Customizing Storage Management Server Transactions, Storage Server Transactions, and Tape Server Transactions" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment".

swstm2006

The Tape Server cluster setup is complete.

Explanation

The cluster for the Tape Server has been set up already.

System action

The system terminates processing.

System administrator response

Check whether the logical node name duplicates the name of a Storage Management Server transaction or a Storage Server transaction.

Ensure that AdvancedCopy Manager shared disks that are being used by another cluster system have not been mounted.

swstm2007

A cluster system environment has been created in [CLUSTER].

Explanation

An environment has been created in a cluster system other than PRIMECLUSTER.

Parameters

CLUSTER : Name of the cluster system that has been created. The displayed strings and explanation are as follows.

Displayed strings

Name of cluster system

MSCS

MSCS or WSFC

MCSG

MC/ServiceGuard

VCS

VERITAS Cluster Server

System action

The system terminates processing.

System administrator response

Tape Servers do not support cluster systems other than PRIMECLUSTER. If Tape Servers are operated on cluster systems, create the cluster systems using PRIMECLUSTER.

swstm2008

The Tape Server setup of the primary node is not complete.

Explanation

The cluster setup for the Tape Server on the primary node has not completed.

System action

The system terminates processing.

System administrator response

After the cluster setup for the Tape Server on the primary node has completed, then re-execute the command.

swstm2009

The Tape Server setup of the secondary node is not complete.

Explanation

The cluster setup for the Tape Server on the secondary node has not completed.

System action

The system terminates processing.

System administrator response

After the cluster setup for the Tape Server on the secondary node has completed, then re-execute the command.

swstm2010

The Tape Server cluster environment of the secondary node has not been deleted.

Explanation

The Tape Server cluster environment for the secondary node has not been deleted.

System action

The system terminates processing.

System administrator response

After the cluster environment for the Tape Server on the secondary node has been deleted, then re-execute the command.

swstm2011

Do not mount the shared disk.

Explanation

The shared disk has not been mounted.

System action

The system terminates processing.

System administrator response

Check whether the shared disk has been mounted to the correct mount point, and then re-execute the command.

To set up a Tape Server transaction on a Storage Management Server transaction, ensure that the DB file system has also been mounted correctly.

swstm2012

Tape server daemon is running.

Explanation

The Tape Server daemon is running.

System action

The system terminates processing.

System administrator response

Stop the Tape Server daemon, and then re-execute the command.

swstm2013

No cluster environment setting file exists. File Name = [FILE]

Explanation

The cluster environment configuration file does not exist.

Parameters

FILE : Name of the cluster environment configuration file

System action

The system terminates processing.

System administrator response

Check whether the shared disk has been mounted to the correct mount point, and then re-execute the command.

swstm2014

Cluster information is not found. File Name = [FILE], Section = [SECTION], Key = [KEY]

Explanation

Cluster information cannot be found.

Parameters

FILE : Name of the file from which information was obtained
SECTION : Section name
KEY : Key name

System action

The system terminates processing.

System administrator response

Refer to the following manual and collect the information required for troubleshooting, and then contact a Fujitsu systems engineer.
"Collecting maintenance information" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide"

swstm2015

Failed to acquire information from the cluster file. Error Code = [CODE], File Name = [FILE]

Explanation

Information could not be obtained from the cluster environment setting file.

Parameters

CODE : Error code
FILE : Cluster file name

System action

The system terminates processing.

System administrator response

Check access permissions and the amount of free disk space, and ensure that no other processes are using the file. And then re-execute the command.

swstm2016

Failed to create the cluster file. Error Code =[CODE], File Name = [FILE]

Explanation

The cluster environment setting file indicated in FILE parameter could not be created.

Parameters

CODE : Error code
FILE : Name of the cluster environment setting file

System action

The system terminates processing.

System administrator response

Check access permissions and the amount of free disk space, and then re-execute the command.

swstm2017

Failed to set up information in the cluster file. Error Code = [CODE], File Name = [FILE]

Explanation

Information could not be set in the cluster environment setting file.

Parameters

CODE : Error code
FILE : Cluster file name

System action

The system terminates processing.

System administrator response

Check access permissions and the amount of free disk space, and ensure that no other processes are using the file. And then re-execute the command.

swstm2018

Failed to delete the cluster file. Error Code = [CODE], File Name = [PATH]

Explanation

The cluster file could not be deleted.

Parameters

CODE : Error code
PATH : The path to the cluster file

System action

The system terminates processing.

System administrator response

Check access permissions, and then re-execute the command.

swstm2019

Failed to create a directory. Directory = [DIR]

Explanation

A directory could not be created.

Parameters

DIR : Directory path

System action

The system terminates processing.

System administrator response

Check access permissions and the amount of free disk space, and then re-execute the command.

swstm2020

Failed to copy the directory. Source Directory=[SRCDIR], Target Directory=[DSTDIR]

Explanation

A directory could not be copied.

Parameters

SRCDIR : Source directory for copying
DSTDIR : Destination directory for copying

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space, and then re-execute the command.

swstm2021

Failed to delete the directory. Directory=[DIR]

Explanation

A directory could not be deleted.

Parameters

DIR : Directory name

System action

The system terminates processing.

System administrator response

Check for the presence of the directory and the access permission, and then re-execute the command.

swstm2022

Failed to move the directory. Source Directory=[SRCDIR] Target Directory=[DSTDIR]

Explanation

A directory could not be moved.

Parameters

SRCDIR : Source directory for moving
DSTDIR : Destination directory for moving

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space, and then re-execute the command.

swstm2023

Failed to create a link. Source Path=[SRCPATH], Target Path=[DSTPATH]

Explanation

A link could not be created.

Parameters

SRCPATH : Link source
DSTPATH : Link destination

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space, and then re-execute the command.

swstm2024

Failed to delete the link. Target Path=[PATH]

Explanation

A link could not be deleted.

Parameters

PATH : Link path

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space, and then re-execute the command.

swstm2025

Processing is interrupted because the signal was received.

Explanation

The processing is terminated because a signal has been received.

System action

The system terminates processing.

System administrator response

Ensure that no other commands are executing, and then re-execute the command.

swstm2026

Cannot write command trace information to the logging file. Temporary Log File=[LOGFILE]

Explanation

Trace information for the setup command could not be written to the log file. The log information has been temporarily output to the temporary log file indicated in LOGFILE parameter.

Parameters

LOGFILE : Path to the temporary log file

System action

The system terminates processing.

System administrator response

Resolve the cause of the error indicated by the error message output immediately before this message, and then re-execute the command.

swstm2027

The Tape Server setup/unsetup command is already running.

Explanation

The Tape Server setup or unsetup command is already running.

System action

The system terminates processing.

System administrator response

Ensure that the Tape Server setup or unsetup command is not running, and then re-execute the command.

swstm2028

The Tape Server setup is not complete.

Explanation

The Tape Server cluster setup has not completed for the specified logical node.

System action

The system terminates processing.

System administrator response

The Tape Server cluster setup for the specified logical node may not have been performed or may have been interrupted.

Re-execute the command after cluster setup for the Tape Server has completed on the node where the command is executed.

For cluster setup of the tape server, see "Customizing Tape Server Transactions" in the "ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment".