The status panel displays a summary of resources statuses (including resources other than PRIMERGY BX servers).
When a problem occurs in the system, a red or yellow light icon starts blinking on the left side of the status panel.
Clicking the light icon changes its color back to gray.
The table below shows the status and meaning associated with each light icon.
Icon | Color | Status | Meaning |
|---|---|---|---|
| Gray (no light) | Normal | No errors or warnings have been detected in the system. |
| Yellow (blinking) | Warning | A warning has been detected in the system. |
| Red (blinking) | Error | An error has been detected in the system. |
Information
When the light icon blinks, it means that a warning or an error has been detected. Check the location of the problem from the chassis or blade panel.
If BladeViewer shows no resources with a warning or error status in either the chassis panel or blade panel, switch to the RC console and check the event log to identify the cause of the problem.
To the right of the light icon, BladeViewer shows the number of servers with an "error", "warning", "normal", and "stop" status.
Icon and number of units | Meaning |
|---|---|
| Server and number of units |
*1: N is the number of servers.
Icon | Status | Meaning |
|---|---|---|
None | Normal | The resource can be used normally. |
| Warning | An error occurred, however the resource can be used. |
| Error | A fault or error occurred, therefore the resource cannot be used. |
| Stopped | The resource is stopped, therefore it cannot be used. |
