This section explains how to register VM management software.
Registration of VM management software (such as VMware vCenter Server, etc) is necessary to enable VM guest migrations.
Use the following procedure to register VM management software:
From the RC console menu, select [Settings]-[VM Management Software].
The [Configure VM Management Software] dialog is displayed.
In the [Configure VM Management Software] dialog, enter the following items.
Select the location of this VM management software installation.
If VM management software is installed on the Admin Server
Select "Admin Server".
Any other case
Select "Other server".
Selecting this option activates the IP address field. Enter the IP address of the server on which VM management software is installed.
By default, "Admin Server" is selected.
Enter the IP address of the server on which VM management software is installed. If "Admin Server" was selected, this field is disabled and shows the IP address of the Admin Server.
Use standard dot notation.
Example
100.100.100.100
Enter the name of a VM management software user account with administrative authority.
Enter no more than 84 characters, including alphanumeric characters or symbols (ASCII characters 0x20 to 0x7e).
Enter the password of the above VM management software user account.
Enter no more than 128 characters, including alphanumeric characters or symbols (ASCII characters 0x20 to 0x7e).
Click the <OK> button.
VM management software is registered with the entered information.
