ETERNUS SFAdvancedCopy Manager 14.0 Operator's Guide forTape Server Option

Chapter 8 Customization of the Storage Pool after the Start of Operation

This chapter explains how to customize the tape storage pools, which were defined during installation, after the start of operation.

All setup tasks are performed after dsmadmc (TSM management client command) is started.

If the "tsm>" prompt is displayed, activate dsmadmc (TSM management client command) before performing operations.

The start and stop methods for the TSM management client command are described below.

1. Starting the TSM management client command

   • Move to the directory.

     # cd /opt/tivoli/tsm/client/ba/bin

   • Execute dsmadmc (TSM management client command).

     # ./dsmadmc
     IBM Tivoli Storage Manager
     Command Line Administrative Interface - Version 5, Release 5, Level 2.0
     (c) Copyright by IBM Corporation and other(s) 1990, 2009. All Rights Reserved.
     
     Enter your user id:  admin
     
     Enter your password:
     
     Session established with server SOL-41: Solaris SPARC
       Server Version 5, Release 5, Level 2.0
       Server date/time: 06/04/09   17:41:13  Last access: 06/04/09   17:27:46
     
     
     tsm>

   • At "Enter User ID", enter the TSM administrator ID, then press the Return key.

   • At "Enter password", enter the TSM administrator password, then press the Return key.

   Point

   The Tape Server must be activated for this procedure. If the TSM management client command fails to start, activate the Tape Server.

2. Stopping the TSM management client command

   At the "tsm>" prompt, enter "quit" to stop dsmadmc (TSM management client command).

   tsm> quit

For details of the commands, refer to the "ETERNUS SF TSM Administrator's Reference".