For information on secondary node setup, refer to "A setup of the TSM server in the cluster node 2" and "If the TSM server is in an active/standby configuration" of the "ETERNUS SF TSM PRIMECLUSTER Application Guide".
For the secondary node also, a special file name must be set for drives on the tape device used by the TSM server. For details, refer to the "ETERNUS SF TSM PRIMECLUSTER Application Guide", section "If the TSM server is in an active/standby configuration" > "TSM server settings on cluster node 1".
Execute the command below to check the special file name to be set.
#ls -l /dev/rmt/*st lrwxrwxrwx 1 root sys 57 Apr 22 13:28 /dev/rmt/2st -> ../../devices/pci@15,2000/fibre-channel@1/IBMtape@1,0:st # |
