Top
ETERNUS SFAdvancedCopy Manager 14.0 Operator's Guide forCluster Environment

B.2 Creating Resources and userApplications

Create a userApplication and resources by following the procedure below.

  1. Select "Application-Create" from the "Main configuration menu".

    f250-1: Main configuration menu, current configuration: acm
    No RMS active in the cluster
    1) HELP                                10) Configuration-Remove
    2) QUIT                                11) Configuration-Freeze
    3) Application-Create                  12) Configuration-Thaw
    4) Application-Edit                    13) Configuration-Edit-Global-Settings
    5) Application-Remove                  14) Configuration-Consistency-Report
    6) Application-Clone                   15) Configuration-ScriptExecution
    7) Configuration-Generate              16) RMS-CreateMachine
    8) Configuration-Activate              17) RMS-RemoveMachine
    9) Configuration-Copy
    Choose an action: 3
  2. Select "CRM" from the "Application type selection menu".

    Creation: Application type selection menu:
    1) HELP                  10) Crm                   19) Rawdisk
    2) QUIT                  11) DEMO                  20) SYMFOWARE
    3) RETURN                12) Demo                  21) Symfoware
    4) OPTIONS               13) Fsystem               22) SystemState2
    5) Application           14) GENERIC               23) SystemState3
    6) BasicApplication      15) Gds                   24) foreign-code
    7) CRM                   16) Gls                   25) generic
    8) Cmdline               17) Ipaddress
    9) Controller            18) Lvm
    Application Type: 7

    The ["CRM" turnkey wizard] as shown below is displayed.

    Settings of turnkey wizard "CRM"
    1) HELP                   4) REMOVE+EXIT            7) Machines+Basics(-)
    2) NO-SAVE+EXIT           5) ApplicationName=APP1
    3) SAVE+EXIT              6) BeingControlled=no
    Choose the setting to process:
  3. Change the userApplication name.

    Depending on the operation, change the userApplication name. If the userApplication name is not changed, this operation is not required.

    1. Select "ApplicationName" in [turnkey wizard "CRM"].

      Settings of turnkey wizard "CRM"
      1) HELP                   4) REMOVE+EXIT            7) Machines+Basics(-)
      2) NO-SAVE+EXIT           5) ApplicationName=APP1
      3) SAVE+EXIT              6) BeingControlled=no
      Choose the setting to process: 5
    2. Select "FREECHOICE."

      1) HELP
      2) RETURN
      3) FREECHOICE
      4) APP1
      Enter the name of this application: 3
    3. Enter the userApplication name.

      "agent_service" is used as the userApplication name in the following example.

      1) HELP
      2) RETURN
      3) FREECHOICE
      4) APP1
      Enter the name of this application: 3
              >> agent_service

      Press the Enter key. The [turnkey wizard "CRM"] window is displayed again.

      Settings of turnkey wizard "CRM"
      1) HELP                                 5) ApplicationName=AGENT_SERVICE
      2) NO-SAVE+EXIT                         6) BeingControlled=no
      3) SAVE+EXIT                            7) Machines+Basics(-)
      4) REMOVE+EXIT
      Choose the setting to process:
  4. Specify the userApplication configuration. Be sure to define the userApplication for standby operation.

    1. Select "Machines+Basics" in the [turnkey wizard "CRM"].

      Settings of turnkey wizard "CRM"
      1) HELP                                 5) ApplicationName=AGENT_SERVICE
      2) NO-SAVE+EXIT                         6) BeingControlled=no
      3) SAVE+EXIT                            7) Machines+Basics(-)
      4) REMOVE+EXIT
      Choose the setting to process: 7
    2. Select "AdditionalMachine," and specify the secondary node.

      Machines+Basics (agent_service:consistent)
      1) HELP                  10) (PostOnlineScript=)   19) (OnlinePriority=)
      2) -                     11) (PreOfflineScript=)   20) (StandbyTransitions=)
      3) SAVE+EXIT             12) (OfflineDoneScript=)  21) (LicenseToKill=no)
      4) REMOVE+EXIT           13) (FaultScript=)        22) (AutoBreak=yes)
      5) AdditionalMachine     14) (AutoStartUp=no)      23) (HaltFlag=no)
      6) AdditionalConsole     15) (AutoSwitchOver=No)   24) (PartialCluster=0)
      7) Machines[0]=f250-1RMS 16) (PreserveState=no)    25) (ScriptTimeout=)
      8) (PreCheckScript=)     17) (PersistentFault=0)
      9) (PreOnlineScript=)    18) (ShutdownPriority=)
      Choose the setting to process: 5

      Select the secondary node. f250-2RMS is selected for the secondary node in the following example.

      1) HELP
      2) RETURN
      3) f250-1RMS
      4) f250-2RMS
      Choose a machine for this application: 4
    3. Specify attributes.

      Depending on the operation mode, also specify the userApplication attributes. For information on userApplication attributes, refer to the "PRIMECLUSTER Installation and Administration Guide".

      The "AutoSwitchOver" attribute is set to "automatically cause a failover in the event of node failure, resource failure, or node termination" in the following example.

      Machines+Basics (agent_service:consistent)
      1) HELP                  10) (PreOnlineScript=)    19) (ShutdownPriority=)
      2) -                     11) (PostOnlineScript=)   20) (OnlinePriority=)
      3) SAVE+EXIT             12) (PreOfflineScript=)   21) (StandbyTransitions=)
      4) REMOVE+EXIT           13) (OfflineDoneScript=)  22) (LicenseToKill=no)
      5) AdditionalMachine     14) (FaultScript=)        23) (AutoBreak=yes)
      6) AdditionalConsole     15) (AutoStartUp=No)     24) (HaltFlag=no)
      7) Machines[0]=f250-1RMS 16) (AutoSwitchOver=No)   25) (PartialCluster=0)
      8) Machines[1]=f250-2RMS 17) (PreserveState=no)    26) (ScriptTimeout=)
      9) (PreCheckScript=)     18) (PersistentFault=0)
      Choose the setting to process: 16

      Select HOSTFAILURE(H).

      Set flags for AutoSwitchOver:  Currently set: NO (N)
      1) HELP                   4) DEFAULT                7) RESOURCEFAILURE(R)
      2) -                      5) NO(N)                  8) SHUTDOWN(S)
      3) SAVE+RETURN            6) HOSTFAILURE(H)
      Choose one of the flags: 6

      Select RESOURCEFAILURE(R).

      Set flags for AutoSwitchOver:  Currently set: HOSTFAILURE (H)
      1) HELP                   4) DEFAULT                7) RESOURCEFAILURE(R)
      2) -                      5) NO(N)                  8) SHUTDOWN(S)
      3) SAVE+RETURN            6) NOT:HOSTFAILURE(H)
      Choose one of the flags: 7

      Select SHUTDOWN(S).

      Set flags for AutoSwitchOver:  Currently set: HOSTFAILURE,RESOURCEFAILURE (HR)
      1) HELP                   4) DEFAULT                7) NOT:RESOURCEFAILURE(R)
      2) -                      5) NO(N)                  8) SHUTDOWN(S)
      3) SAVE+RETURN            6) NOT:HOSTFAILURE(H)
      Choose one of the flags: 8

      Select SAVE+RETURN.

      Set flags for AutoSwitchOver:  Currently set: HOSTFAILURE,RESOURCEFAILURE,SHUTDO
      WN (HRS)
      1) HELP                   4) DEFAULT                7) NOT:RESOURCEFAILURE(R)
      2) -                      5) NO(N)                  8) NOT:SHUTDOWN(S)
      3) SAVE+RETURN            6) NOT:HOSTFAILURE(H)
      Choose one of the flags: 3
    4. After specifying all of the attributes completely, select SAVE+EXIT.

      Machines+Basics (agent_service:consistent)
      1) HELP
      2) -
      3) SAVE+EXIT
      4) REMOVE+EXIT
      5) AdditionalMachine
      6) AdditionalConsole
      7) Machines[0]=f250-1RMS
      8) Machines[1]=f250-2RMS
      9) (PreCheckScript=)
      10) (PreOnlineScript=)
      11) (PostOnlineScript=)
      12) (PreOfflineScript=)
      13) (OfflineDoneScript=)
      14) (FaultScript=)
      15) (AutoStartUp=yes)
      16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
      17) (PreserveState=no)
      18) (PersistentFault=0)
      19) (ShutdownPriority=)
      20) (OnlinePriority=)
      21) (StandbyTransitions=)
      22) (LicenseToKill=no)
      23) (AutoBreak=yes)
      24) (HaltFlag=yes)
      25) (PartialCluster=0)
      26) (ScriptTimeout=)
      Choose the setting to process: 3

      Press the Enter key to return to the [turnkey wizard "CRM"] window.

      Settings of turnkey wizard "CRM"
      1) HELP                                 9) CRM(-)
      2) -                                   10) LocalFileSystems(-)
      3) SAVE+EXIT                           11) RemoteFileSystems(-)
      4) -                                   12) IpAddresses(-)
      5) ApplicationName=AGENT_SERVICE       13) RawDisks(-)
      6) Machines+Basics(agent_service)      14) LVM-VolumeManagement(-)
      7) CommandLines(-)                     15) Gds:Global-Disk-Services(-)
      8) Controllers(-)                      16) Gls:Global-Link-Services(-)
      Choose the setting to process:
  5. Define the Fsystem resources.

    Before the Fsystem resources can be defined, the mount point must be specified in /etc/fstab on all nodes making up the userApplication. For details on how to define the resources, refer to the "PRIMECLUSTER Installation and Administration Guide".

    Do not specify a file system because AdvancedCopy Manager data exists.

    1. Select "LocalFileSystems" in the [turnkey wizard "CRM"].

      Settings of turnkey wizard "CRM"
      1) HELP                                 9) CRM(-)
      2) -                                   10) LocalFileSystems(-)
      3) SAVE+EXIT                           11) RemoteFileSystems(-)
      4) -                                   12) IpAddresses(-)
      5) ApplicationName=AGENT_SERVICE       13) RawDisks(-)
      6) Machines+Basics(agent_service)      14) LVM-VolumeManagement(-)
      7) CommandLines(-)                     15) Gds:Global-Disk-Services(-)
      8) Controllers(-)                      16) Gls:Global-Link-Services(-)
      Choose the setting to process: 10
    2. Select AdditionalMountPoint.

      File systems (Lfs_AGENT_SERVICE:not yet consistent)
      1) HELP                   4) REMOVE+EXIT            7) (Timeout=180)
      2) -                      5) AdditionalMountPoint
      3) SAVE+EXIT              6) (Filter=)
      Choose the setting to process: 5

      Register the mount point of the shared disk for shared data.

      For a Storage Management Server transaction, also register the mount point of the shared disk for the repository.

      To register multiple mount points, repeat steps b to d as many times as the number of mount points to be registered.

    3. Select the mount point to be registered.

      /CTTEST3is set in the following example.

      1) HELP                   5) /CTTEST3               9) /kensa/work_c
      2) RETURN                 6) /acm                  10) /kensa/work_d
      3) FREECHOICE             7) /kensa/work_a         11) /kensa/work_e
      4) ALL                    8) /kensa/work_b
      Choose a mount point: 5
    4. Select SAVE+RETURN.

      Set flags for mount point: /CTTEST3 Currently set: LOCAL,AUTORECOVER (LA)
      1) HELP                   4) DEFAULT                7) SHARE(S)
      2) -                      5) SYNC(Y)                8) MONITORONLY(M)
      3) SAVE+RETURN            6) NOT:AUTORECOVER(A)
      Choose one of the flags: 3
    5. After registering all of the mount points, select SAVE+EXIT.

      File systems (Lfs_AGENT_SERVICE:consistent)
      1) HELP                                 5) AdditionalMountPoint
      2) -                                    6) MountPoints[0]=LA:/CTTEST3
      3) SAVE+EXIT                            7) (Filter=)
      4) REMOVE+EXIT                          8) (Timeout=180)
      Choose the setting to process: 3

      Press the Enter key to return to the [turnkey wizard "CRM"] window.

      Settings of turnkey wizard "CRM"
      1) HELP                                 9) CRM(-)
      2) -                                   10) LocalFileSystems(Lfs_AGENT_SERVICE)
      3) SAVE+EXIT                           11) RemoteFileSystems(-)
      4) -                                   12) IpAddresses(-)
      5) ApplicationName=AGENT_SERVICE       13) RawDisks(-)
      6) Machines+Basics(agent_service)      14) LVM-VolumeManagement(-)
      7) CommandLines(-)                     15) Gds:Global-Disk-Services(-)
      8) Controllers(-)                      16) Gls:Global-Link-Services(-)
      Choose the setting to process:
  6. Define the Gds resources.

    1. After registering all of the mount points, select SAVE+EXIT.

      Select "Gds:Global-Disk-Services" in the [turnkey wizard "CRM"] window.

      Settings of turnkey wizard "CRM"
      1) HELP                                 9) CRM(-)
      2) -                                   10) LocalFileSystems(Lfs_AGENT_SERVICE)
      3) SAVE+EXIT                           11) RemoteFileSystems(-)
      4) -                                   12) IpAddresses(-)
      5) ApplicationName=AGENT_SERVICE       13) RawDisks(-)
      6) Machines+Basics(agent_service)      14) LVM-VolumeManagement(-)
      7) CommandLines(-)                     15) Gds:Global-Disk-Services(-)
      8) Controllers(-)                      16) Gls:Global-Link-Services(-)
      Choose the setting to process: 15
    2. Select AdditionalDiskClass.

      Volume management (Gds_AGENT_SERVICE:not yet consistent)
      1) HELP                   4) REMOVE+EXIT            7) (StandbySupport=no)
      2) -                      5) AdditionalDiskClass    8) (AutoRecover=no)
      3) SAVE+EXIT              6) (ClassNameFilter=)     9) (Timeout=1800)
      Choose the setting to process: 5

      Register the GDS class to which the shared disk for shared data belongs.

      For a Storage Management Server transaction, also register the GDS class to which the shared disk for the repository belongs.

      To register multiple GDS classes, repeat steps b to d as many times as the number of GDS classes to be registered.

    3. Select the class to be registered.

      ACM-E-Agt is set in the following example.

      1) HELP                                 6) ACM
      2) RETURN
      3) FREECHOICE
      4) Symfo
      5) test001
      Choose the disk class: 5
    4. Select SAVE+RETURN.

      Currently set:
      1) HELP                                 5) MONITORONLY(M)
      2) -
      3) SAVE+RETURN
      4) DEFAULT
      Choose additionally one of the flags: 3
    5. After registering all of the GDS classes, select SAVE+EXIT.

      Volume management (Gds_AGENT_SERVICE:consistent)
      1) HELP                                 6) DiskClasses[0]=test001
      2) -                                    7) (ClassNameFilter=)
      3) SAVE+EXIT                            8) (StandbySupport=no)
      4) REMOVE+EXIT                          9) (AutoRecover=no)
      5) AdditionalDiskClass                 10) (Timeout=1800)
      Choose the setting to process: 3

      Press the Enter key to return to the [turnkey wizard "CRM"] window.

      Settings of turnkey wizard "CRM"
      1) HELP
      2) -
      3) SAVE+EXIT
      4) -
      5) ApplicationName=AGENT_SERVICE
      6) Machines+Basics(agent_service)
      7) CommandLines(-)
      8) Controllers(-)
      9) CRM(-)
      10) LocalFileSystems(Lfs_AGENT_SERVICE)
      11) RemoteFileSystems(-)
      12) IpAddresses(-)
      13) RawDisks(-)
      14) LVM-VolumeManagement(-)
      15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE)
      16) Gls:Global-Link-Services(-)
      Choose the setting to process:
  7. Define the Gls resources.

    1. Select "Gls:Global-Link-Services" in the turnkey wizard "CRM".

      Settings of turnkey wizard "CRM"
      1) HELP
      2) -
      3) SAVE+EXIT
      4) -
      5) ApplicationName=AGENT_SERVICE
      6) Machines+Basics(agent_service)
      7) CommandLines(-)
      8) Controllers(-)
      9) CRM(-)
      10) LocalFileSystems(Lfs_AGENT_SERVICE)
      11) RemoteFileSystems(-)
      12) IpAddresses(-)
      13) RawDisks(-)
      14) LVM-VolumeManagement(-)
      15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE)
      16) Gls:Global-Link-Services(-)
      Choose the setting to process: 16
    2. Select AdditionalTakeoverIpaddress.

      Gls (Gls_AGENT_SERVICE:not yet consistent)
      1) HELP                                 4) REMOVE+EXIT
      2) -                                    5) AdditionalTakeoverIpaddress
      3) SAVE+EXIT                            6) (Timeout=60)
      Choose the setting to process: 5

      Register the logical IP address prepared for AdvancedCopy Manager.

    3. Select the logical IP address to be registered.

      10.10.10.11 is set in the following example.

      1) HELP
      2) RETURN
      3) FREECHOICE
      4) 10.10.10.10
      5) 10.10.10.11
      Choose a takeover IP address for Gls: 5
    4. Select SAVE+RETURN.

      Set a flag for takeover IP address: 10.10.10.11
      Currently set:
      1) HELP                                 5) AUTORECOVER(A)
      2) -
      3) SAVE+RETURN
      4) DEFAULT
      Choose additonally one of the flags: 3

      The resource operation mode can be set in the window. Depending on the operation mode, set the resource operation mode.

      For information on the resource operation modes, refer to the "PRIMECLUSTER Installation and Administration Guide".

    5. Select SAVE+EXIT.

      Gls (Gls_AGENT_SERVICE:consistent)
      1) HELP                                 5) AdditionalTakeoverIpaddress
      2) -                                    6) TakeoverIpaddress[0]=N,10.10.10.11
      3) SAVE+EXIT                            7) (Timeout=60)
      4) REMOVE+EXIT
      Choose the setting to process: 3

      The timeout value of the Gls resource can be set in the window. Depending on the operation mode, specify the timeout value of the Gls resource.

      For information on the timeout values of the Gls resources, refer to the "PRIMECLUSTER Installation and Administration Guide".

      Press the Enter key to return to the [turnkey wizard "CRM"] window.

      Settings of turnkey wizard "CRM"
      1) HELP
      2) -
      3) SAVE+EXIT
      4) -
      5) ApplicationName=AGENT_SERVICE
      6) Machines+Basics(agent_service)
      7) CommandLines(-)
      8) Controllers(-)
      9) CRM(-)
      10) LocalFileSystems(Lfs_AGENT_SERVICE)
      11) RemoteFileSystems(-)
      12) IpAddresses(-)
      13) RawDisks(-)
      14) LVM-VolumeManagement(-)
      15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE)
      16) Gls:Global-Link-Services(Gls_AGENT_SERVICE)
      Choose the setting to process:
  8. Define the procedure resources.

    1. Select "CRM" in the [turnkey wizard "CRM"].

      Settings of turnkey wizard "CRM"
      1) HELP
      2) -
      3) SAVE+EXIT
      4) -
      5) ApplicationName=AGENT_SERVICE
      6) Machines+Basics(agent_service)
      7) CommandLines(-)
      8) Controllers(-)
      9) CRM(-)
      10) LocalFileSystems(Lfs_AGENT_SERVICE)
      11) RemoteFileSystems(-)
      12) IpAddresses(-)
      13) RawDisks(-)
      14) LVM-VolumeManagement(-)
      15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE)
      16) Gls:Global-Link-Services(Gls_AGENT_SERVICE)
      Choose the setting to process: 9
    2. Select "Application." Register the AdvancedCopy Manager procedure resource as an Application.

      Crm (CRM_AGENT_SERVICE:not yet consistent)
      1) HELP                   4) REMOVE+EXIT            7) BasicApplication(-)
      2) -                      5) SystemState2(-)        8) Application(-)
      3) SAVE+EXIT              6) SystemState3(-)
      Choose the setting to process: 8
    3. Select AdditionalResource.

      Settings of "Application"
      1) HELP                                 4) REMOVE+RETURN
      2) NO-SAVE+RETURN                       5) AdditionalResource
      3) -
      Choose the setting to process: 5
    4. Select the AdvancedCopy Manager procedure resource. The name of the AdvancedCopy Manager procedure resource is SMGRPROC_logical-node-name.

      The procedure resource with the logical node name "nodeagt (SMGRPROC_nodeagt)" is set in the following example.

      1) HELP
      2) RETURN
      3) -
      4) SMGRPROC_nodeAGT
      Choose the resource: 4
    5. Select SAVE+RETURN.

      Settings of "Application"
      1) HELP                                 5) AdditionalResource
      2) NO-SAVE+RETURN                       6) ResourceName[0]=SMGRPROC_nodeAGT
      3) SAVE+RETURN                          7) Flags[0]=OT1800
      4) REMOVE+RETURN                        8) Priority[0]=65535
      Choose the setting to process: 3

      Do not change the timeout value and resource class internal priority for the state transition procedure, which is the AdvancedCopy Manager procedure resource.

      For information on timeout values and the resource class internal priority for the state transition procedure, refer to the "PRIMECLUSTER Installation and Administration Guide".

    6. Select SAVE+EXIT.

      Crm (CRM_AGENT_SERVICE:consistent)
      1) HELP                                 5) SystemState2(-)
      2) -                                    6) SystemState3(-)
      3) SAVE+EXIT                            7) BasicApplication(-)
      4) REMOVE+EXIT                          8) Application(Crm_Application)
      Choose the setting to process: 3

      Press the Enter key to return to the [turnkey wizard "CRM"] window.

      Settings of turnkey wizard "CRM"
      1) HELP
      2) -
      3) SAVE+EXIT
      4) -
      5) ApplicationName=AGENT_SERVICE
      6) Machines+Basics(agent_service)
      7) CommandLines(-)
      8) Controllers(-)
      9) CRM(CRM_AGENT_SERVICE)
      10) LocalFileSystems(Lfs_AGENT_SERVICE)
      11) RemoteFileSystems(-)
      12) IpAddresses(-)
      13) RawDisks(-)
      14) LVM-VolumeManagement(-)
      15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE)
      16) Gls:Global-Link-Services(Gls_AGENT_SERVICE)
      Choose the setting to process:
  9. After registering all of the resources, select SAVE+EXIT.

    Settings of turnkey wizard "CRM"
    1) HELP
    2) -
    3) SAVE+EXIT
    4) -
    5) ApplicationName=AGENT_SERVICE
    6) Machines+Basics(agent_service)
    7) CommandLines(-)
    8) Controllers(-)
    9) CRM(CRM_AGENT_SERVICE)
    10) LocalFileSystems(Lfs_AGENT_SERVICE)
    11) RemoteFileSystems(-)
    12) IpAddresses(-)
    13) RawDisks(-)
    14) LVM-VolumeManagement(-)
    15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE)
    16) Gls:Global-Link-Services(Gls_AGENT_SERVICE)
    Choose the setting to process: 3

    Press the Enter key to return to the [Main configuration menu] window.

    f250-1: Main configuration menu, current configuration: acm
    No RMS active in the cluster
    1) HELP                                10) Configuration-Remove
    2) QUIT                                11) Configuration-Freeze
    3) Application-Create                  12) Configuration-Thaw
    4) Application-Edit                    13) Configuration-Edit-Global-Settings
    5) Application-Remove                  14) Configuration-Consistency-Report
    6) Application-Clone                   15) Configuration-ScriptExecution
    7) Configuration-Generate              16) RMS-CreateMachine
    8) Configuration-Activate              17) RMS-RemoveMachine
    9) Configuration-Copy
    Choose an action:
  10. Select "Configuration-Generate" from the "Main RMS Management menu".

    f250-1: Main configuration menu, current configuration: acm
    No RMS active in the cluster
    1) HELP                                10) Configuration-Remove
    2) QUIT                                11) Configuration-Freeze
    3) Application-Create                  12) Configuration-Thaw
    4) Application-Edit                    13) Configuration-Edit-Global-Settings
    5) Application-Remove                  14) Configuration-Consistency-Report
    6) Application-Clone                   15) Configuration-ScriptExecution
    7) Configuration-Generate              16) RMS-CreateMachine
    8) Configuration-Activate              17) RMS-RemoveMachine
    9) Configuration-Copy
    Choose an action: 7
  11. Select "Configuration Active" from the "Main RMS Management menu".

    f250-1: Main configuration menu, current configuration: acm
    No RMS active in the cluster
    1) HELP                                10) Configuration-Remove
    2) QUIT                                11) Configuration-Freeze
    3) Application-Create                  12) Configuration-Thaw
    4) Application-Edit                    13) Configuration-Edit-Global-Settings
    5) Application-Remove                  14) Configuration-Consistency-Report
    6) Application-Clone                   15) Configuration-ScriptExecution
    7) Configuration-Generate              16) RMS-CreateMachine
    8) Configuration-Activate              17) RMS-RemoveMachine
    9) Configuration-Copy
    Choose an action: 8