Top
ETERNUS SF Storage Cruiser 14.0 User's Guidefor Virtual Storage Conductor

C.3 vsceportset Command

NAME

vsceportset - Changes the communication port number used for communication with the admin server


SYNOPSIS

vsceportset

DESCRIPTION

Use this command to change the port number when the default port number (7420) used for communication with the admin server or the default port number (7422) used for communication with the virtualization switch in a redundant configuration is already in use.

This command must be executed by a user with administrator privileges.


OPTIONS

None.


EXAMPLES

This command changes the port number used for communication with the admin server to 7455, the port number used for communication with the other virtualization switch in a redundant configuration to 7456, and the port number used for local interface communication in the virtualization switch to 7457.

Case of VS900 Model 200

vsce1:admin> vsceportset
Input vsc-manager-engine-if port Number:[7420] -> 7455  [ENTER]  Example: Specify 7455.
Input vsc-engine-engine-if  port Number:[7422] -> 7456  [ENTER]  Example: Specify 7456.
Input vsc-engine-self-if    port Number:[7423] -> 7457  [ENTER]  Example: Specify 7457.

Setting parameters are ...
  vsc-manager-engine-if Port Number = 7520
  vsc-engine-engine-if  Port Number = 7522
  vsc-engine-self-if    Port Number = 7523
Are you sure ? Yes:1 No:other -> 1                      [ENTER]  Confirm data for execution.

vsceportset Operation normally end.

When the vsceportset command is executed, the value displayed in each square bracket in the input request message is the currently set value. If you do not want to change the currently set value, simply press [ENTER] without entering any value.

vsce1:admin> vsceportset
Input vsc-manager-engine-if port Number:[7455] ->    [ENTER]  Example: Specify no value.
Input vsc-engine-engine-if  port Number:[7456] ->    [ENTER]  Example: Specify no value.
Input vsc-engine-self-if    port Number:[7457] ->    [ENTER]  Example: Specify no value.

Setting parameters are ...
  vsc-manager-engine-if Port Number = 7455
  vsc-engine-engine-if  Port Number = 7456
  vsc-engine-self-if    Port Number = 7457
Are you sure ? Yes:1 No:other -> 1                   [ENTER]  Confirm data for execution.

vsceportset Operation normally end.

Other case of VS900 Model 200

BFOS:admin> vsceportset

Port number set. <cr> to skip a parameter

Input vsc-manager-engine-if port Number. [7420] -> 7455  [ENTER]  例:7455を指定

Input vsc-engine-engine-if  port Number. [7422] -> 7456  [ENTER]  例:7456を指定

Input vsc-engine-self-if    port Number. [7423] -> 7457  [ENTER]  例:7457を指定

Setting parameters are ... 

  vsc-manager-engine-if Port Number = 7455

  vsc-engine-engine-if  Port Number = 7456

  vsc-engine-self-if    Port Number = 7457

Are you sure ? Yes:1 No:other -> 1                      [ENTER]  Confirm data for execution.

vsceportset : Operation normally end. 

BFOS:admin>

When the vsceportset command is executed, the value displayed in each square bracket in the input request message is the currently set value. If you do not want to change the currently set value, simply press [ENTER] without entering any value.

BFOS:admin> vsceportset

Port number set. <cr> to skip a parameter

Input vsc-manager-engine-if port Number. [7455] ->   [ENTER]  Example: Specify no value.

Input vsc-engine-engine-if  port Number. [7456] ->   [ENTER]  Example: Specify no value.

Input vsc-engine-self-if    port Number. [7457] ->   [ENTER]  Example: Specify no value.

Setting parameters are ... 

  vsc-manager-engine-if Port Number = 7455

  vsc-engine-engine-if  Port Number = 7456

  vsc-engine-self-if    Port Number = 7457

Are you sure ? Yes:1 No:other -> 1                   [ENTER]  Confirm data for execution.

vsceportset : Operation normally end. 

BFOS:admin>


EXIT STATUS

0: Normal end of changing the port number

1: Failure to change the port number