ETERNUS SF Storage Cruiser 14.0 User's Guidefor Virtual Storage Conductor

5.4.3 When the user selects the migration destination physical disk

The user can select all migration destination physical disks for performing migration as follows:

1. Select the <Start Migration> button in the copy window. Otherwise, select [Operations] - [Start Migration].

2. The "Start Migration" dialog box then appears.

3. If you want to disable the automatic switch from the migration source to the migration destination physical disk, check the [Hold Migration Backup Disk] box (which at this time is not yet checked by default).

4. Click the <Migration Source Setup> button.

5. The "Select Migration Source" dialog box then appears.

6. Select from the migration source tree area the virtual enclosure that stores the virtual disk you want to migrate.

7. The "Select Migration Source" table lists the virtual disks in the virtual enclosure.

8. Select the virtual disk you want to migrate and click the <OK> button.

9. The "Start Migration" dialog box shows information of the virtual disk selected.

10. Click the <Migration Destination Setup> button.

11. The "Select Migration Destination" dialog box then appears.

12. Select the virtual storage pool in which the migration destination physical disk is registered and click the <OK> button.

13. The "Select Migration Destination (Physical Disk)" dialog box then appears.

14. Check the migration destination physical disk.

    If you want to change the assigned capacity of the physical disk selected:

    1. Click the <Assigned Capacity> button for the physical disk whose quota capacity you want to change.

    2. The "Assigned Capacity" dialog box then appears.

    3. Enter the changed quota capacity.

    Assigned Capacity (required)

    Enter the capacity you want to assign from the physical disk selected to the virtual disk in [MB].

    1. Click the <OK> button in the "Assigned Capacity" dialog box.

    2. Click the <OK> button in the "Select Migration Destination (Physical Disk)" dialog box.

15. Click the <Start Migration> button in the "Start Migration" dialog box.

16. The "Start Migration" confirmation dialog then appears. Click the <OK> button.

17. The "Start Migration" dialog displays the migration activation result. Click the <Close> button.

18. Confirm on the copy status reference display screen that migration has been activated.

    The migration processing of the virtual disks will be executed.