The table displays details of the item selected in the tree. When "Thin Provisioning Pool monitor" is selected, a list of the devices targeted for monitoring is displayed. When a device is selected, a list of the Thin Provisioning Pool registered to the device is displayed. When a Thin Provisioning Pool is selected, a list of the logical volumes registered to the Thin Provisioning Pool is displayed.
。The following table describes the content displayed.
Device list
Display item | Value | Description |
---|---|---|
Device Name | Any character string | The identifier used by this product. The name is unique within the managed range. The device name + serial number, the WWN, and so on, are displayed. If an SNMP SysName has been set for the device, that name is displayed. If a management name has been defined from this product, that name is displayed. |
IP Address | IP address | Indicates the IP address of the device. |
Thin Provisioning Pool list
Display item name | Tab display item name | Value | Description |
---|---|---|---|
TPP | No. | Thin Provisioning Pool number | Indicates the Thin Provisioning Pool number. It is a four-digit hexadecimal number. The following icons are displayed in accordance with the threshold values set for each Thin Provisioning Pool for monitoring when the capacity is running out.
|
Name | Any character string | Indicates the Thin Provisioning Pool name that was set by the user. | |
Disk Kind | "Online", | Indicates the attributes of the disks that comprise the Thin Provisioning Pool. | |
Reliability | "High", | Indicates the degree of reliability of the Thin Provisioning Pool. If information could not be obtained from the device, a hyphen (-) is displayed. | |
Capacity (MB) | Decimal number | Indicates the total Thin Provisioning Pool capacity in MB units. | |
Used Capacity (MB) | Decimal number | The physical capacity allocated from the Thin Provisioning Pool to logical volumes is displayed in MB units. | |
Use Capacity Ratio (%) | Decimal number | Indicates the percentage of the physical capacity allocated to logical volumes, based on the total capacity of the Thin Provisioning Pool. | |
Notice | Status | "Normal", | Indicates the threshold value monitoring status of the Thin Provisioning Pool. Normal: The Thin Provisioning Pool capacity used is less than the "Caution threshold value". Caution: The Thin Provisioning Pool capacity used is less than the "Warning threshold value" and the same or greater than the "Caution threshold value". Warning: The Thin Provisioning Pool capacity used is the same or greater than the "Warning threshold value". - (hyphen): Information could not be obtained due to a device fault or similar. |
Warning (%) | Decimal number | Indicates the "Warning threshold value" set for the Thin Provisioning Pool. This threshold value is a strong warning level indicating the percentage of the capacity of the Thin Provisioning Pool that is already allocated. | |
Caution (%) | Decimal number, | Indicates the "Caution threshold value" set for the Thin Provisioning Pool. This threshold value is a weak warning level indicating the percentage of the capacity of the Thin Provisioning Pool that is already allocated. If a value is not set, a hyphen (-) is displayed. | |
Encryption | "Encryption", | Indicates the encryption status of the Thin Provisioning Pool. Encryption: Encrypted. Non-Encryption: Not encrypted. - (hyphen): Information could not be collected due to a device fault or similar. |
LogicalVolume list
Display item name | Tab display item name | Value | Description |
---|---|---|---|
LogicalVolume | No. | LogicalVolume number | Indicates the logical volume number. It is a four-digit hexadecimal number. If the unallocated capacity of the volume is the same or greater than the "Caution threshold value" set at the device side, |
Name | Any character string | Displays the logical volume name set by the user. | |
Capacity (MB) | Decimal number | Indicates the logical capacity of the logical volume in MB units. | |
Used Capacity (MB) | Decimal number, | Indicates the physical capacity allocated to the logical volume in MB units. If information could not be obtained due to a device fault or similar, a hyphen (-) is displayed. | |
Notice | Status | "Normal", | Indicates the threshold value monitoring status of the logical volume. Normal: The volume unallocated capacity is less than the "Caution threshold value". Caution: The volume unallocated capacity is the same or greater than the "Caution threshold value". - (hyphen): Information could not be obtained due to a device fault or similar. |
Caution (%) | Decimal number | Indicates the "Caution threshold value" set for the logical volume. | |
Encryption | "Encryption", | Indicates the encryption status of the logical voume. Encryption: Encrypted. Non-Encryption: Not encrypted. - (hyphen): Information could not be collected due to a device fault or similar. |